Twin-Star International 18WM100, 23WM100, 28WM100, 33WM100 Assembly Instructions Manual
INSTRUCTION MANUAL ENCLOSED
MANUEL D’INSTRUCTION Á L’INTÉRIEUR
MANUAL DE INSTRUCCIONES ADJUNTO
STOP
STOP
ATTENTION
IF YOU HAVE ANY PROBLEMS OR QUESTIONS, EMAIL
OR CALL CUSTOMER SERVICE BEFORE YOU RETURN
THIS PRODUCT TO THE STORE WHERE IT WAS PURCHASED.
For Customer Service: email: parts@twinstarhome.com
in English Call: 866-661-1218
in Spanish Call: 866-661-1218
in French Call: 866-374-9203
PARE
PARE
ATENCIÓN
SI TIENE ALGÚN PROBLEMA O PREGUNTAS,
ENVÍE UN MENSAJE DE CORREO ELECTRÓNICO O LLAME AL SERVICIO
DE ATENCIÓN AL CLIENTE ANTES DE DEVOLVER
ESTE PRODUCTO A LA TIENDA EN LA QUE LO COMPRÓ.
Servicio de atención al cliente: Correo electrónico: parts@twinstarhome.com
Línea para llamadas en inglés: 866-661-1218
Línea para llamadas en español: 866-661-1218
Línea para llamadas en francés: 866-374-9203
ARRET
ATTENTION
ARRET
SI VOUS AVEZ DES PROBLÈMES OU QUESTIONS,
ENVOYEZ UN COURRIEL AU SERVICE À LA CLIENTÈLE OU APPELEZ LE
SERVICE À LA CLIENTÈLE AVANT DE RETOURNER
CE PRODUIT OÙ VOUS L’AVEZ ACHETÉ.
Pour le service à la clientèle : courriel : parts@twinstarhome.com
pour le service en anglais, composez le 866-661-1218
pour le service en espagnol, composez le 866-661-1218
pour le service en français, composez le 866-374-9203
INSTRUCTION MANUAL ENCLOSED
MANUEL D’INSTRUCTION Á L’INTÉRIEUR
MANUAL DE INSTRUCCIONES ADJUNTO
WOOD FIREPLACE MANTEL
18WM100 23WM100 28WM100 33WM100
WOOD MANTEL ASSEMBLY INSTRUCTIONS
E-1
PARTS LIST
Part Description Quantity
PARTS
A Hearth/Base 1
B Left Front Panel 1
C Right Front Panel 1
D
EE
FF
GG
E
F Right Side Panel 1
G Mantel/Top 1
L Bolt 1/4” x 1 1/4” 33
M Washer 33
N
S
T
For Customer Service:
E-mail: parts@twinstarhome.com
In English call: 866-661-1218
In French call: 866-374-9203
In Spanish call: 866-661-1218
Center Front Panel
Front Molding Top
Front Molding Left
Front Molding Right
Left Side Panel 1
HARDWARE
Wood Dowel
Molding Brackets
Small Wood Screws
1
1
1
1
16
2
8
PLEASE READ AND FOLLOW ALL SAFETY TIPS
GETTING STARTED
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make sure
you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: parts@twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French
or 1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure
to include your name and address.
CAUTION:
DO NOT MOVE MANTEL OR INSERT WHILE PLUGGED INTO POWER SUPPLY.
HELPFUL HINTS
• Some steps are more easily handled with two adults.
• Attach the fireplace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE
BACK OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
• Use care in assembling your new fireplace, take your time and use the hardware provided and a
quality Phillips head screwdriver. NEVER OVER TIGHTEN BOLTS.
• Do not sit on top of the mantel.
CARE & CLEANING
1. Dust your fireplace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your fireplace with a gentle non-abrasive household cleaner. Make sure to dry your
fireplace immediately with a soft cloth or towel.
For a complete tight fit every bolt
should have a flat washer. First slide a
N
flat washer onto the bolt. Your bolt is
now ready for use.
Now it is time to assemble your Fireplace.All
panels are labeled Left and Right as viewed
from the front of unit.
1. Locate the Center Front Panel (D), Right Front
Panel (C) and Left Front Panel (B) and set out
face down on a scratch free surface.
2. Insert one Wood Dowel (N) into each of the
pre-drilled holes.
3. Push the Right Front Panel and Left Front Panel
snug to the Center Panel. Make sure the Wood
Dowels are seated in the pre-drilled holes. Insert
Bolts (L) and Washers (M) into the holes in the
mounting blocks.
HAND TIGHTEN ONLY.
Center Front
Panel
N
C
Right Front
Panel
D
M
L
Left Front
Panel
B
E-2
M
L
Completed
Front
Assembly
Hearth/Base
A
M
L
M
L
E
Left
Side
Panel
M
L
Completed Assembly
F
Right
Side
Panel
E-3
Front Molding Top
EE
Front
Molding
Left
S
T
N
FF
GG
M
Front
Molding
Right
9. Locate the three front molding pieces
( EE, FF, GG) and four dowels. With the
three molding pieces face down on a clean
smooth flat surface. Insert dowels into the
two holes on the side molding pieces
(FF, GG). Carefully slide the left (FF) and
right (GG) side molding pieces into place
using the dowels. Locate flat metal bracket
(6) and place into spaces in back of molding
pieces. Attach bracket to molding pieces
using small wood screws (T).
CAREFUL NOT TO OVER TIGHTEN.
M
L
L
10. Set completed front molding assembly
against front of fireplace. Fit over the
molding detail attached to the center
panel, and align with the sides of the fire place opening. From the back of unit insert
10 bolts (L) w/washers (M) into the predrilled
holes and tighten.
BE CAREFUL NOT TO OVER TIGHTEN.
E-4
Loading...