Operating Manual for BSX
Introduction
Thank you for choosing a high quality product "MADE IN GERMANY" from TW AUDiO.
The Big Subwoofer eXtender (BSX) is equipped with two powerful 21" drivers, with a
peak power of 10 kW per driver, this loudspeaker is able to reproduce an exceptionally
solid low frequency foundation. Thanks to the unique TW AUDiO hybrid enclosure principle, maximum efficiency is achieved so that the acoustic energy is produced over a
greater distance than conventional subwoofers.
The BSX loudspeaker is primarily utilized as low frequency bass enhancement with
other subwoofer loudspeakers and can described as a ULF / Infra product. That said,
due to the BSX hybrid design and the extremely strong, yet light membranes, frequencies up to 120 Hz are reproduced with exceptional transient response and in high fidelity. This means the BSX loudspeaker can be operated in two modes or “Infra-bass/UltraLow Frequency” or as a standard “Sub”. Therefore, it can also be combined directly with
the M, T, C or VERA systems.
If you lend your product to another party, inform that party of the safety-related operating
procedures and hand over this operating manual. If you therefore require additional copies of this operating manual, they can be obtained free of charge from TW AUDiO or
downloaded from: www.twaudio.de
Strictly adhere to the instructions contained in this operating manual that are marked as
follows:
Instructions in the operating manual
WARNING
This symbol in combination with the signal word "Warning" identifies a potentially hazardous situation. Failure to comply with this safety instruction can lead to serious injury
or even death.
WARNING
This symbol in combination with the signal word "Warning" identifies a potentially hazardous situation for persons with a pacemaker. Failure to comply with this safety instruction can lead to serious injury or even death.
CAUTION
This symbol in combination with the signal word "Caution" identifies a potentially hazardous situation. Failure to comply with this safety instruction can lead to light or moderate
injury.
NOTE
This symbol in combination with the signal word "Note" identifies a potentially hazardous
situation. Failure to comply with this safety instruction can lead to product damage.
TIP
This symbol in combination with the signal word "Tip" identifies additional information or
notes that will simplify working with TW AUDiO products on the basis of practical experience.