Tvone Voyager USB Quick Start Manual
Link
Max 500m via Multimode Fiber
Max 10KM via Singlemode Fiber (upgraded Singlemode SFP required)
USB 2.0 Fiber Optic
KVM Extender System
Quick
Start
Guide
1
2
Place Extenders where desired and Insert your SFP into the CPU and REMOTE
transceiver. Then connect the Fiber Extension cable to both end points
Before you get started, ensure that all the drivers required for your USB device(s) are installed.
Connect the CPU Transceiver to the computer using the included USB cable.
Link
Link
Computer
Note: Power adapter is not required at the local extender for normal operation.
A
B
A
B
(LC-LC crossover duplex cable not included)
USB
Link
Max 500m via Multimode Fiber
Max 10KM via Singlemode Fiber (upgraded Singlemode SFP required)
USB 2.0 Fiber Optic
KVM Extender System
www.tvone.com
Quick
Start
Guide
1
2
3
4
Place Extenders where desired and Insert your SFP into the CPU and REMOTE
transceiver. Then connect the Fiber Extension cable to both end points
Before you get started, ensure that all the drivers required for your USB device(s) are installed.
Connect the REMOTE Transceiver to the AC adapter and plug into a power source.
Connect the CPU Transceiver to the computer using the included USB cable.
Attach USB device(s) to the REMOTE Transceiver
Host
Activity
Link
Power
Link
Link
Computer
Note: Power adapter is not required at the local extender for normal operation.
CSG-VGUSB
Link
A
B
A
B
(LC-LC crossover duplex cable not included)
▪ Transparent USB extension
▪ True plug and play; no software drivers required
▪ Works with all major operating systems: Windows®,
Mac OS X®, and Linux®
Features:
USB
USB
Loading...