How it Works
TV One
Loading...
C2-8000 Series
Operation Manual
136 pgs1.21 Mb0

TV One C2-8000 Series Operation Manual

C2-8000 SERIES OPERATION MANUAL
TABLE OF CONTENTS
1 DISCLAIMER................................................................................................ 1
1.1 Regulatory Agency Acceptance...........................................................................1
1.2 FCC Statement....................................................................................................1
1.3 Manual Version Information................................................................................. 2
1.4 Manual Copyright Notice.....................................................................................2
2 IMPORTANT SAFETY INSTRUCTIONS......................................................3
3 CAPABILITY, DEVICE FEATURES AND PRODUCT FEATURES............. 19
4 PRODUCT IMAGES ................................................................................... 21
5 UNPACKING AND INSTALLATION............................................................ 23
6 FRONT PANEL CONTROLS...................................................................... 24
6.2.2 Locking front panel buttons & IR remote control................................................27
6.2.3 Restore power-on settings................................................................................. 27
7 VIDEO INPUTS AND OUTPUTS................................................................ 28
8 OPERATING MODES AND ARCHITECTURE ........................................... 32
8.1 Switcher ............................................................................................................ 33
8.3 Multi-PIP............................................................................................................35
9 MENU LAYOUT AND SETTINGS ADJUSTMENT...................................... 37
9.1 Group Names and Descriptions......................................................................... 38
C2-8000 SERIES OPERATION MANUAL
9.3 Items Associated with the Adjust outputs group................................................. 39
9.4 Items Associated with the Adjust windows group............................................... 43
9.6 Edge Blend items within the Adjust keyers group..............................................51
9.9 Items Associated with the Adjust sources group................................................54
9.9.3 RGB Source Menu Items................................................................................... 59
9.9.5 Still Image Store / Testcard Source Menu Items................................................ 61
9.10 Items associated with the Adjust transitions group............................................. 61
9.12 Items associated with the Adjust resolutions group............................................ 64
10 EDGE-BLENDING SETUP.......................................................................... 72
10.2 Edge-blending requirements.............................................................................. 73
10.6 Edge-blending activation ................................................................................... 76
10.7 Edge-blending overlap / size .............................................................................76
10.8 Edge-blending guide lines ................................................................................. 77
11 3D VIDEO................................................................................................... 85
C2-8000 SERIES OPERATION MANUAL
11.1 General information...........................................................................................85
11.7 3D Picture-in-Picture ......................................................................................... 90
11.8 Other types of 3D resolution / Transcoding between them.................................91
11.9 CORIO2 units suitable for 3D processing.......................................................... 91
12 SERIAL PORT ............................................................................................ 93
13 ETHERNET PORT...................................................................................... 95
14 SERIAL / IP CONTROL SPECIFICATION.................................................. 96
14.1 Communication protocol basics......................................................................... 96
14.4 Examples ........................................................................................................ 108
14.5 Reading and writing macros............................................................................109
14.5.1 Reading a previously stored Macro.................................................................109
14.5.2 Writing to a macro........................................................................................... 110
14.5.3 Run and Restore macros................................................................................. 110
14.5.4 Emulate a front panel button press..................................................................111
14.5.5 Reset command.............................................................................................. 115
15 COMMON OPERATIONS......................................................................... 117
15.1 Operation of the Keyer.................................................................................... 117
15.1.1 Preparation:.....................................................................................................117
15.1.2 Adjustment:.....................................................................................................117
16 TROUBLESHOOTING AND TECHNICAL SUPPORT.............................. 119
16.1 There is no picture on the Output....................................................................119
16.2 The image is shifted and not fully viewable......................................................119
16.3 The output resolutions no longer appear as expected.....................................119
16.4 There is excessive flicker on the Output.......................................................... 120
16.5 The Output image is distorted.......................................................................... 120
16.6 Some colors appear to be incorrect on the CV/YC output................................ 120
C2-8000 SERIES OPERATION MANUAL
16.7 How can I reduce color smearing on CV connections?....................................120
16.8 I can no longer adjust the Output image resolution.......................................... 120
16.9 The picture on the video display is black and white......................................... 120
16.10 The picture on the video display is green......................................................... 120
16.11 The RGB input is selected but the image is rolling or pink............................... 121
16.12 The video signal from my DVD player does not appear to work.......................121
16.13 Image is flashing, snow is present, or source image does not appear............. 121
17 RETURN PROCEDURE........................................................................... 122
17.1 Are you sure there's a fault?............................................................................122
17.2 To return a unit for repair................................................................................. 122
18 WARRANTY POLICY ............................................................................... 124
19 CONNECTOR PINOUTS.......................................................................... 125
19.1 DVI-U connector..............................................................................................125
19.2 RS232/422/485 D9 socket............................................................................... 125
19.3 HD44 Connection on optional Audio module................................................... 126
20 SPECIFICATIONS.................................................................................... 127
20.1 Video Inputs.................................................................................................... 127
20.2 Reference Input...............................................................................................127
20.3 Computer Digital Inputs................................................................................... 127
20.4 Analog inputs...................................................................................................127
20.5 Video Outputs..................................................................................................127
20.6 Computer Digital Outputs................................................................................ 128
20.7 Analog Outputs................................................................................................ 128
20.8 SDI inputs & outputs........................................................................................ 128
20.9 Audio module.................................................................................................. 128
20.10 Locking/Mixing................................................................................................. 128
20.11 Scaling / sampling / memory............................................................................128
20.12 Reliability......................................................................................................... 129
20.13 Warranty..........................................................................................................129
20.14 Regulatory Compliance................................................................................... 129
20.15 Environmental .................................................................................................129
20.16 Power Requirement......................................................................................... 129
20.17 Control Methods..............................................................................................129
20.18 Accessories Included....................................................................................... 129
20.19 Mechanical......................................................................................................129
20.20 Optional Accessories....................................................................................... 130
C2-8000 SERIES OPERATION MANUAL
1
1 DISCLAIMER
This product is intended for professional and/or home use. This product is not intended for use in a medical environment and does not have the required certifications for such use. Similarly, use aboard any aircraft or spacecraft while in flight or as an adjunct to any surface, airborne or marine navigation system or any offshore marine activity, including control of any watercraft, or any use similar to those specifically herein mentioned is prohibited. Use in the aforementioned circumstances would require additional testing and certification.
You have not become the owner of any software - you have merely purchased the right to use the software. You may make one copy of the software for your own use. Other copies will be deemed a breach of copyright.
No warranty is made either expressed or implied including but not limited to any implied warranties of merchantability or fitness for a particular purpose. In no event shall the supplier or manufacturer of this product be liable for errors found within, or be liable for any direct, indirect or consequential damages or loss in connection with the purchase or use of this hardware software or manual. The sole and exclusive liability to the supplier and manufacturer regardless of the form of action shall not exceed the replacement cost of the materials described herein.
By using this equipment you have indicated that you have agreed to the terms listed above. If you do not wish to agree or the above terms are contrary to your conditions of purchase you may return the equipment, unused, to your supplier. All trademarks and copyrights are acknowledged. E&OE.
1.1 Regulatory Agency Acceptance European ‘CE’ Mark Statement
Emissions: BS EN 61000-6-3:2006 (Generic Immunity Standard for Residential, Commercial and Light Industrial) Immunity: BS EN 61000-6-1:2001 or EN 55103-2:2009 (Generic Immunity Standard for Residential, Commercial and Light Industrial) Safety (AC inlet units): IEC 60065
1.2 FCC Statement
Class A Device: This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide a reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the Instruction Manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
C2-8000 SERIES OPERATION MANUAL
2
Caution: This equipment is intended for use in the manner prescribed in the Instruction Manual. Any user changes or modifications not expressly approved by TV One Multimedia Solutions could void the user’s authority to operate the equipment. Connecting this equipment to external devices requires no specially shielded cabling for FCC compliance. The Instruction Manual shows or descr bes the proper connection of this equipment for operation that insures FCC compliance.
Direct all inquiries regarding FCC compliance to: TV One Multimedia Solutions
2791 Circleport Drive Erlanger, KY 41018 USA Tel 859-282-7303 Fax 859-282-8225
1.3 Manual Version Information
Version: 2.15 Release Date: February, 2011
1.4 Manual Copyright Notice
This Operation Manual is the intellectual property of TV One, ©2006, 2007, 2008, 2009, 2010, 2011. No portion of this manual may be copied or reproduced in any manner or by any means, including, but not limited to electronic and electro­mechanical, without the express written permission of TV One.
C2-8000 SERIES OPERATION MANUAL
3
2 IMPORTANT SAFETY INSTRUCTIONS
To insure the best from this product, please read this manual carefully.
Read these instructions Keep these Instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the apparatus.
This unit must be connected to a mains socket outlet with a protective
earth connection.
The AC wall outlet should be installed near to the unit and be easily
accessible.
Only use attachments / accessories specified by the manufacturer Unplug this apparatus during lighting storms or when unused for long
periods of time
Refer all servicing to qualified servicing personnel. Servicing is
required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid had been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
!
WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
C2-8000 SERIES OPERATION MANUAL
4
The AC power cord or adaptor furnished with the unit should conform to
the type in use in your country. Please compare the plug on your cord or adaptor with the power socket where the unit will be installed.
If you did not receive the correct plug, DO NOT
attempt to modify it. Instead, immediately contact your dealer or contact TV One at the sales office nearest to your geographic location and request the proper plug.
2. 1 Intellectual property
Some IC chips in this product include confidential and/or trade secret property. Therefore you may not copy, modify, adapt, translate, distribute, reverse engineer, reverse assemble or decompile the contents thereof.
C2-8000 SERIES OPERATION MANUAL
5
2 CONSIGNE IMPORTANTE DE SECURITE
Pour obtenir les meilleures performances avec ce produit, nous vous demandons de lire soigneusement ce manuel.
Lisez ces consignes Conservez ces consignes Respectez tous les avertissements Respectez toutes les consignes N'utilisez pas cet appareil à proximité d'eau Nettoyez-le en utilisant uniquement un chiffon sec Ne bloquez pas les ouvertures de ventilation. Installez cet appareil en
respectant les consignes du constructeur
Ne procédez pas à une installation à proximité de sources de chaleur,
quelles qu'elles soient, (radiateurs, registres calorifiques, fours, etc.) ou d'autres appareils (dont des amplificateurs) qui produisent de la chaleur
Ne cherchez pas à détourner l'objectif de la prise électrique à
polarisation ou à mise à la masse. Une prise électrique polarisée comporte deux lames de largeurs différentes. Une prise à mise à la masse a deux lames et une broche de mise à la masse. La lame la plus large ou la troisième broche ont pour but de vous protéger. Si la prise fournie ne correspond pas à la prise murale, consultez un électricien pour remplacer l'élément obsolète
Protégez le cordon électrique pour éviter que l'on ne marche dessus
ou qu'on ne le coince, en particulier au niveau des prises mâles ou des prises murales et au niveau de l'appareil
Il faut brancher l'appareil sur une prise du secteur disposant d'une
mise à la terre.
La prise murale de courant doit être installée près de l’unité et
aisément accessible.
Utilisez uniquement les fixations et accessoires spécifiés par le
fabricant
Débranchez cet appareil durant les orages électriques ou pendant les
périodes prolongées d'inactivité
Confiez toutes les interventions d'entretien à un personnel qualifié
spécialisé dans l'entretien. Une intervention d'entretien s'avère nécessaire lorsque cet appareil a été endommagé, d'une façon ou d'une autre, par exemple lorsque le cordon d'alimentation électrique ou sa prise est endommagé, lorsqu'il y a eu un épanchement de
C2-8000 SERIES OPERATION MANUAL
6
liquide ou lorsque des objets sont tombés sur cet appareil, voire même lorsque cet appareil a été exposé à de la pluie ou une humidité, ne fonctionne pas normalement ou est tombé.
!
AVERTISSEMENT Pour réduire tout risque d'incendie ou
de choc électrique, n'exposez pas cet appareil à la pluie
ou à une humidité.
Le câble d'alimentation secteur ou l'adaptateur remis avec cet appareil
doit être conforme au type employé dans votre pays. Veuillez comparer la prise de votre cordon électrique ou de votre adaptateur à la prise murale de l'emplacement où doit être installé votre appareil.
Si vous n'avez pas reçu la bonne prise, N'ESSAYEZ PAS
de la modifier. Vous devez au contraire immédiatement contacter votre revendeur ou le bureau de vente TV One le plus proche de chez vous pour demander la bonne prise.
2. 1 Propriété intellectuelle
Certaines puces à circuits imprimés de ce produit contiennent des données confidentielles et (ou) des secrets professionnels. Par conséquent, vous ne pouvez pas recopier, modifier, adapter, traduire ou distribuer son contenu ou procéder à une ingénierie inverse ou à une décompilation de ce contenu.
C2-8000 SERIES OPERATION MANUAL
7
2 WICHTIGE SICHERHEITSANWEISUNGEN
Lesen Sie diese Bedienungsanleitung sorgfältig, um zu gewährleisten, dass Sie den optimalen Nutzen aus diesem Produkt ziehen.
Lesen Sie diese Anweisungen. Bewahren Sie diese Anweisungen auf. Beachten Sie alle Warnhinweise. Befolgen Sie alle Anweisungen. Verwenden Sie dieses Gerät nicht in der Nähe von Wasser. Verwenden Sie zur Reinigung nur ein trockenes Tuch. Blockieren Sie keine Lüftungsöffnungen. Installieren Sie das Gerät
nach den Anweisungen des Herstellers.
Stellen Sie das Gerät nicht in der Nähe von Wärmequellen wie etwa
Heizkörpern, Heizklappen, Öfen oder anderen Wärme erzeugenden Geräten (einschließlich Verstärkern) auf.
Setzen Sie den Sicherheitszweck von unvertauschbaren Steckern
oder Erdungssteckern nicht außer Kraft. Ein unvertauschbarer Stecker besitzt zwei Messerkontakte, von denen einer breiter als der andere ist. Ein Erdungsstecker besitzt zwei Messerkontakte und einen dritten Erdungskontakt. Der breitere Messerkontakt oder der Erdungskontakt dient Ihrer Sicherheit. Falls der mitgelieferte Stecker nicht an eine Steckdose angeschlossen werden kann, beauftragen Sie einen Elektriker, die veraltete Steckdose auszutauschen.
Schützen Sie das Netzkabel, so dass niemand auf das Netzkabel
treten kann oder es insbesondere an Steckern, Steckdosen und an der Stelle, an der das Netzkabel aus dem Gerät geführt wird, nicht eingeklemmt werden kann.
Verwenden Sie nur Zusatzgeräte/Zubehör, die/das der Hersteller
angibt.
Ziehen Sie den Netzstecker dieses Geräts bei Gewittern und auch
dann ab, wenn es über einen längeren Zeitraum nicht betrieben wird.
Lassen Sie Reparaturen nur von qualifiziertem Wartungspersonal
durchführen. Reparaturen sind erforderlich, wenn das Gerät in irgendeiner Form beschädigt wurde, beispielsweise das Netzkabel oder der Stecker beschädigt wurde, Flüssigkeit auf dem Gerät verschüttet wurde oder Objekte in das Gerät gefallen sind, das Gerät Regen oder Feuchtigkeit ausgesetzt wurde, nicht normal arbeitet oder fallen gelassen wurde.
!
WARNUNG: Setzen Sie das Gerät weder Regen noch
Feuchtigkeit aus, um die Gefahr eines Brandes oder
elektrischen Schlags zu minimieren.
C2-8000 SERIES OPERATION MANUAL
8
Das mitgelieferte Netzkabel oder der mitgelieferte Adapter müssen dem
in Ihrem Land verwendeten Typ entsprechen. Vergleichen Sie den Netzstecker oder Adapter mit der Netzsteckdose, an die das Gerät angeschlossen wird.
Falls Sie nicht den richtigen Stecker erhalten haben, versuchen Sie
NICHT
, ihn zu ändern. Setzen Sie sich stattdessen mit Ihrem Fachhändler oder der Verkaufsniederlassung von TV One in Verbindung, die sich am nächsten an Ihrem Wohnort befindet, und fordern Sie den richtigen Stecker an.
2.1 Geistiges Eigentum
Einige IC-Chips in diesem Produkt enthalten vertrauliche Informationen und/oder Geschäftsgeheimnisse. Aus diesem Grund dürfen Sie deren Inhalt nicht kopieren, ändern, anpassen, übersetzen, verteilen zurückentwickeln oder dekompilieren.
C2-8000 SERIES OPERATION MANUAL
9
2 INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Para garantizar el máximo rendimiento de este producto, lea cuidadosamente este manual.
Lea estas instrucciones Guarde estas instrucciones Respete todas las advertencias Siga todas las instrucciones No use este aparato cerca del agua Límpielo sólo con un paño seco No bloquee ninguna abertura de ventilación. Instálelo de acuerdo con
las instrucciones del fabricante
No lo instale cerca de fuentes de calor como radiadores, salidas de
aire caliente, estufas u otros aparatos (incluyendo amplificadores) que produzcan calor.
Respete la finalidad de seguridad de las clavjas polarizadas o con
toma de tierra. Una clavija polarizada tiene dos cuchillas, una más ancha que la otra. Una clavija del tipo de puesta a tierra tiene dos cuchillas y un tercer borne para puesta a tierra. La cuchilla más ancha o el tercer borne son para su seguridad. Si la clavija suministrada no se adapta a su toma de corriente, consulte a un electricista para que cambie la toma obsoleta.
Proteja el cable de alimentación para que no se pueda pisar ni
pellizcar, especialmente junto a las clavijas, tomas de corriente, y en el punto de salida de las mismas en el aparato.
Use sólo accesorios / elementos especificados por el fabricante Desenchufe el aparato durante las tormentas eléctricas o si no va a
usarlo durante un largo período de tiempo.
Consulte con personal cualificado cualquier tipo de servicio. Se
necesitará servicio cuando el aparato haya sufrido daños de cualquier tipo, como daños en el cable de alimentación o en las clavijas, haya entrado líquido o se hayan caído objetos dentro del aparato, haya estado expuesto a la lluvia o humedad, no funcione normalmente o se haya caído.
!
ADVERTENCIA: Para reducir el riesgo de incendio o
electrocución, no exponga el aparato a la lluvia ni la
humedad.
El cable de alimentación de C.A o el adaptador suministrado con la
unidad debe ser conforme al tipo usado en su país. Compare la clavija en su cable o adaptador con la toma de corriente donde vaya a instalar la unidad.
C2-8000 SERIES OPERATION MANUAL
10
Si no ha recibido la clavija correcta, NO
intente modificarla. Póngase inmediatamente en contacto con su distr buidor o con TV One en la oficina de ventas más cercana a su localización geográfica y solicite la clavija adecuada.
2.1 Propiedad intelectual
Algunos chips con circuitos integrados presentes en este producto incluyen propiedad confidencial y/o secreta del sector. Por lo tanto, usted no puede copiar, modificar, adaptar, traducir, distribuir, diseñar a la inversa, montar a la inversa o descompilar el contenido de los mismos.
C2-8000 SERIES OPERATION MANUAL
11
2 BELANGRIJKE VEILIGHEIDSINSTRUCTIE
Om dit product optimaal te kunnen gebruiken, dient u deze handleiding aandacht te lezen.
Lees deze instructies Bewaar deze instructies Let op alle waarschuwingen Volg alle instructies Gebruk dit apparaat niet in de nabijheid van water Reinig het apparaat alleen met een droge doek Blokkeer geen ventilatieopeningen. Installeer het apparaat volgens de
instructies van de fabrikant
Plaats het apparaat niet in de nabijheid van warmtebronnen zoals
radiatoren, kachels, warmtesensoren zoals thermometers, of andere apparaten (waaronder versterkers) die warmte afgeven.
Omzeil het beveiligingsoogmerk van de gepolariseerde of geaarde
stekker niet. Een gepolariseerde stekker heeft twee pinnen, waarvan de een breder is dan de ander. Een geaarde stekker heeft twee pinnen, en een derde pin; een zogeheten aardlekpin. De bredere pin of aardlekpin is er voor uw veiligheid. Als de geleverde stekker niet in het stopcontact past, vraag dan een elektricien om het verouderde stopcontact te vervangen.
Bescherm de netspanningkabel zodanig dat er niet op kan worden
gelopen en dat er geen kink in kan komen, vooral bij de stekker, pinnen, en bij de aansluiting op het apparaat
Gebruik alleen de accessoires en onderdelen die door de fabrikant
worden aanbevolen
Haal de stekker van dit apparaat bij onweer uit het stopcontact. Doe
dit ook wanneer het apparaat lange tijd niet wordt gebru kt.
Laat alle onderhoud over aan gekwalificeerd personeel. Onderhoud is
vereist wanneer het apparaat op enigerlei wijze is beschadigd, bijvoorbeeld in het geval van een beschadigd netsnoer of een beschadigde stekker, wanneer er vloeistof op het apparaat is gemorst, of wanneer er een voorwerp in het apparaat is gevallen, wanneer het apparaat is blootgesteld aan regen of vocht, niet normaal functioneert, of is gevallen.
!
WAARSCHUWING Om het risico op brand of een
elektrische schok te verkleinen, dient u dit apparaat niet
bloot te stellen aan regen of vocht.
Het type wisselspanningkabel of adapter dat met deze eenheid is
geleverd, dient overeen te komen met wat in uw land wordt gebruikt.
C2-8000 SERIES OPERATION MANUAL
12
Vergelijk de stekker van de kabel of adapter met het stopcontact waarop de eenheid wordt aangesloten.
Als u niet de juiste stekker hebt ontvangen, breng dan zelf GEEN
wijzigingen aan. Neem in plaats daarvan direct contact op met uw dealer of met de afdeling verkoop van TV One die zich het dichtst bij u in de buurt bevindt en vraag om de juiste stekker.
2.1 Intellectueel eigendom
In bepaalde IC-chips in dit product zijn vertrouwelijke informatie en/of geheime handelseigendommen opgenomen. Het is u daarom niet toegestaan om de inhoud ervan te kopiëren, wijzigen, aanpassen, vertalen, verspreiden, te onderwerpen aan reverse engineering, reverse assembling, of te decompileren.
C2-8000 SERIES OPERATION MANUAL
13
2 VIKTIGA SÄKERHETSANVISNINGAR
För att få ut det bästa av din produkt bör du läsa denna bruksanvisning noggrant.
Läs dessa anvisningar Spara dessa anvisningar Rätta dig efter alla varningar Föj alla instruktioner Använd inte enheten nära vatten Rengör enhetenendast med torr trasa Blockera inte ventilationsöppningarna. Installera enheten enligt
tillverkarens anvisningar
Placera inte enheten nära värmekällor, som värmeelement,
varmluftsintag, spisar eller annan utrustning (inklusive förstärkare) som producerar värme.
Försök inte använda en stickkontakt i ett uttag som den inte är
utformad att användas i. En polariserad kontakt har två blad – det ena bredare än det andra. En jordad kontakt har två blad och ett tredje jordstift. Det breda bladet eller jordstiftet är till för din säkerhet. Om den medföljande stickkontakten inte passar i ditt eluttag måste du kontakta en elektriker för att få eluttaget utbytt.
Skydda nätsladden så att man inte kan trampa på den eller klämma
den, särskilt intill stickkontakten, vid grenuttag och där den kommer ut från enheten.
Använd bara anslutningar och tillbehör som specificeras av
tillverkaren.
Dra ur nätsladden före åskväder eller när enheten inte ska användas
en längre tid.
Överlåt all service åt kvalificerad servicepersonal. Service krävs när
enheten är skadad på något sätt, t.ex. om nätsladden eller stickkontakten har skadats, om vätska eller främmande föremål har kommit in i enheten, om enheten har utsatts för regn eller fukt, om den inte fungerar normalt eller om den har tappats i golvet.
!
VARNING Med tanke på risken för brand och elchock får
enheten inte utsättas för regn eller fukt.
Den medföljande nätsladden eller adaptorn måste vara av den typ som
används i ditt land. Jämför stickkontakten på nätsladden eller adaptorn med eluttaget där enheten ska installeras.
Om du inte fick rätt stickkontakt FÅR DU INTE
försöka anpassa den. Kontakta i stället omedelbart butiken eller TV Ones närmaste försäljningsställe och be att få rätt stickkontakt.
C2-8000 SERIES OPERATION MANUAL
14
2.1 Intellektuell egendom
Vissa IC-chip i denna produkt innehåller konfidentiellt material och/eller företagshemligheter. Du får därför inte kopiera, modifiera, anpassa, översätta eller distribuera innehållet eller använda reverse engineering, assemblering eller dekompilering på det.
C2-8000 SERIES OPERATION MANUAL
15
2 VIKTIGE SIKKERHETSANVISNINGER
For at du skal få mest mulig ut av dette produktet, ber vi deg lese denne håndboken nøye.
Les disse anvisningene. Ta vare på disse anvisningene. Vær oppmerksom på alle anvisningene. Følg alle anvisningene. Ikke bruk dette apparatet i nærheten av vann. Må bare rengjøres med en tørr klut. Ikke blokker ventilasjonsåpningene.Må installeres i
overensstemmelse med produsentens anvisninger.
Må ikke installeres i nærheten av varmekilder som radiatorer,
varmeapparater, komfyrer eller andre apparater (også forsterkere) som produserer varme.
Ikke sett sikkerhetsinnretningen til det polariserte eller jordete
støpselet ut av funksjon. Et polarisert støpsel har to pinner, hvor den ene er bredere enn den andre. Et jordet støpsel har to pinner pluss en tredje jordingspinne. Den brede pinnen eller tredje pinnen er der av hensyn til sikkerheten. Hvis støpselet som følger med ikke passer i kontakten, må du kontakte en elektriker for å få skiftet ut kontakten.
Beskytt ledningen mot å bli tråkket på eller klemt, spesielt ved
støpselet, stikkontakten og punktet hvor den kommer ut av apparatet.
Ikke bruk andre typer tilbehør enn det som er angitt av produsenten. Koble apparatet fra strømforsyningen i tordenvær eller når det ikke
skal brukes over en lengre periode.
Overlat all service til kvalifisert servicepersonell. Apparatet trenger
service hvis det på en eller annen måte har fått en skade, for eksempel at ledningen eller støpselet er ødelagt, det er blitt sølt væske på eller gjenstander har falt inn i apparatet, apparatet har vært utsatt for regn eller fuktighet, ikke fungerer som det skal eller har falt i gulvet.
!
ADVARSEL For å redusere faren for brann eller elektrisk
støt, må apparatet ikke utsettes for regn eller fuktighet.
Strømledningen (vekselstrøm) eller adapteren som følger med
enheten må tilsvare den typen som brukes i landet der du bor. Sammenlign støpselet på ledningen eller adapteren med st kkontakten der hvor enheten skal installeres.
C2-8000 SERIES OPERATION MANUAL
16
Hvis du har fått feil støpsel, må du IKKE
forsøke å modifisere det. I stedet må du straks kontakte forhandleren eller nærmeste salgskontor for TV One og be om riktig type støpsel.
2.1 Opphavsrett
Noen av IC-brikkene i dette produktet inneholder fortrolig informasjon og/eller fabrikkhemmeligheter. Du må derfor kke kopiere, endre, tilpasse, oversette, distribuere, rekonstruere kildekodene til eller dekompilere noe av dette innholdet.
C2-8000 SERIES OPERATION MANUAL
17
2 TÄRKEITÄ TURVALLISUUSOHJEITA
Lue tämä opaskirja huolellisesti, jotta saat parhaan hyödyn tästä tuotteesta.
Lue nämä ohjeet Säilytä nämä ohjeet Ota kaikki varoitukset huomioon Noudata kaikkia ohjeita Älä käytä tätä laitetta veden lähellä Puhdista vain kuivalla kankaalla Älä tuki ilma-aukkoja. Asenna laite valmistajan ohjeiden mukaisesti. Älä asenna laitetta lähelle lämpölähteitä, kuten esim. lämpöpatteria,
lämmitintä, uunia tai muita lämpöä tuottavia laitteita (vahvistimet mukaan lukien).
Älä tee tyhjäksi polarisoidun tai maadoitetun pistokkeen
turvallisuustarkoitusta. Polarisoidussa pistokkeessa on kaksi kosketuspiikkiä, joista toinen on leveämpi. Maadoitetussa pistokkeessa on kaksi kosketuspiikkiä ja kolmas maattokosketin. Leveä kosketuspiikki tai kolmas maattokosketin on turvallisuusominaisuus. Jos toimitettu pistoke ei sovi pistorasiaan, pyydä sähköasentajaa asentamaan uusi pistorasia.
Varmista, että verkkojohdon yli ei kävellä eikä se jää puristuksiin
etenkin pistoke- ja liitinkohdista sekä laitteesta ulostulevista kohdista.
Käytä vain valmistajan määrittämiä lisälaitteita/lisävarusteita. Kytke laite irti verkkovirrasta ukkosmyrskyn aikana tai silloin, kun sitä
ei käytetä pitkään a kaan.
Jätä kaikki huoltotoimenpiteet pätevän huoltohenkilöstön
suoritettavaksi. Laite on toimitettava huoltoon, jos se on vahingoittunut jotenkin, kuten esim. verkkojohto tai pistoke on vioittunut, laitteeseen on joutunut nestettä tai laitteen päälle on pudonnut esineitä, laite on altistunut sateelle tai kosteudelle, laite ei toimi normaalisti tai se on pudonnut.
!
VAROITUS! Älä altista tätä laitetta sateelle tai kosteudelle
tulipalon tai sähköiskun vaaran vähentämiseksi
Laitteen mukana tulevan verkkojohdon tai sovittimen tulee olla
yhdenmukainen maassa jo käytössä olevien kanssa. Tarkasta, että verkkojohdon pistoke tai sovitin sopii asennuspaikassa olevaan pistorasiaan.
C2-8000 SERIES OPERATION MANUAL
18
Jos laitteen pistoke on väärä, ÄLÄ
yritä muunnella sitä. Ota heti yhteys jälleenmyyjään tai lähimpään TV One -myyntikonttoriin ja pyydä oikeaa pistoketta.
2.1 Immateriaaliomaisuus
Jotkut tässä tuotteessa olevat IC-sirut sisältävät luottamuksellista ja/tai liikesalaisuusomaisuutta. Sen tähden sisältöä ei saa kopioida, muokata, kääntää, jakaa, takaisinmallintaa, mallintaa symbolisella konekielellä tai kääntää takaisin.
C2-8000 SERIES OPERATION MANUAL
19
3 CAPABILITY, DEVICE FEATURES AND PRODUCT
FEATURES
3.1 Device Capabilities
The C2-8000 Series uses the proprietary CORIO®2 Engine to perform its functions, being the second generation of the successful CORIO®products. The CORIO®2 technology is a powerful toolset for any application requiring high quality video signal conversion or image manipulation.
The unit features a dual-channel architecture with three video processing and scaling engines. Advanced video mixing, keying, edge-blending and seamless switching capabilities are supported.
These functions allow the flexibility for handling a wide range of inputs and outputs, depending on the unit used. Audio input, routing and output is available for HDMI and (optional) SDI connections. An optional Audio module also allows audio delay and AES3-id compatibility to support the A2-7300 range of units.
Supports DVI and HDMI resolutions up to 1920x1200@60Hz, 3G-SDI (depending on unit), Composite Video, YC (S-Video), YUV/YPbPr, and HDCP on DVI/HDMI inputs and outputs.
The DVI input and outputs on the unit provide the extra flexibility of DVI-U functionality, this provides the same connectivity as a DVI-I connection but with the additional provision of Composite and YC video.
3.2 Device Features General Topography
4:4:4 RGB / YUV sampling provides full bandwidth color which allows precise keying where included in the unit’s capabilities. This can be achieved through the transparent (soft) keys on the front of the unit. Each unit’s video inputs accommodate multiple video and computer signal formats and resolutions – see specifications at end of manual for full details.
Ultimate flexibility
The output signal format flexibility assures that the native resolution of virtually any display can be matched. Because of the resolution calculator (included in the CORIOtools Suite), even new resolutions can be added to the unit. Signal parameter adjustments can be made for each video input and are stored in individual non-volatile memories for retrieval once the unit’s power has been removed. The video scaler units employ pixel adaptive motion compensation to de­interlace fast moving images, and automatic 3:2 pull-down efficiently de-interlaces video from 24 fps NTSC film.
C2-8000 SERIES OPERATION MANUAL
20
Simple Control
The unit can be controlled in various ways. One option is to control it from the front panel using the keys on the front of the unit. It can also be controlled via RS­232/422/485 or via Ethernet using the CORIOtools Suite.
The CORIOtools Suite is available for download from our internet site and affords complete control of the unit.
Upgradeability
The unit also benefits from firmware upgradeability, thus reducing product obsolescence by allowing the installation of the latest version of firmware. This not only applies to the software used to control the unit, but also to the range of resolutions stored inside the unit, the addition of new features, and upgrades to the heart of the image processing hardware – the CORIO®2 scaling engine. See
http://www.tvone.com/support
for more detail.
C2-8000 SERIES OPERATION MANUAL
21
4 PRODUCT IMAGES
Front panel of all units
C2-8110
6x DVI-U inputs, 2x DVI-U outputs, 1x Ref+loop
C2-8120
8x DVI-U inputs, 2x DVI-U outputs, 1x Ref+loop
C2-8130
12x DVI-U inputs, 2x DVI-U outputs, 1x Ref+loop
C2-8160
10x DVI-U inputs, 2x DVI-U outputs, 1x Ref+loop, Audio module
C2-8210
8x DVI-U inputs, 2x DVI-U outputs, 1x Ref+loop, 2x 3G-SDI inputs, 2x 3G-SDI outputs
C2-8260
6x DVI-U inputs, 2x DVI-U outputs, 1x Ref+loop, 2x 3G-SDI inputs, 2x 3G-SDI outputs, Audio module
C2-8000 SERIES OPERATION MANUAL
22
C2-8000 SERIES OPERATION MANUAL
23
5 UNPACKING AND INSTALLATION
5.1 Shipping Carton
Your unit will arrive double boxed for maximum protection during shipping. You are encouraged to retain both boxes and all packing material so the unit can be returned in the unlikely event that repairs should ever become necessary.
5.2 Important Safety Instructions
The AC power cable furnished with the unit should conform to the type in use in your country. Please compare the plug on your cable with the power socket where the unit will be installed.
If you did not receive the correct cable, DO NOT
attempt to modify it. Instead, immediately contact your dealer or contact TV One at the sales office nearest to your geographic location and request the proper cable.
Installation should be made such that the system fans are not blocked by other pieces of equipment, and such that they may not be accidentally touched by users.
5.3 Initial Operation Check Using Factory Default Settings
This product can be operated via multiple methods, but for the purposes of initially acquainting you with the operation of the unit, this manual will address the operation using the Front Panel controls.
If you have problems using the unit as described below, see the ‘Factory reset’ description shortly afterwards.
By default, both DVI-U outputs will display a CORIO2 test image – a PC monitor can be connected to ensure that the unit is functioning properly.We’ll be using a Personal Computer for a signal source and a PC monitor that can support 1024 x 768 @ 60Hz as this is the default output resolution.
Disconnect the cable going from a Personal Computer’s Monitor to the Personal Computer. Connect the output from the PC video card (the PC connector formerly used by the monitor cable) to the input on the rear panel of the unit.
Next, take the cable from the PC monitor and connect it to the unit’s output. Then connect the AC power cable to a working AC outlet, turn on the PC, monitor and then your unit.
Provided you have not changed anything from the Factory Defaults then your PC’s image should appear on the display as normal.
C2-8000 SERIES OPERATION MANUAL
24
6 FRONT PANEL CONTROLS
The range of buttons on the front of the unit provides the user with quick access for selecting a variety of inputs and features.
The cross-hair (up/down/left/right) buttons on the front panel provides the user with a way of navigating the Liquid Crystal Display menus (LCD) which is detailed in a later section. Pressing and holding the ON/STANDBY button will place the unit into a low-power mode. A single press will turn it back on again.
The central area of buttons are dedicated to selecting the source for Program and Preview outputs (in Switcher mode), or for Windows A and B in Independent and Multi-PIP modes.
The SHIFT button can be pressed by itself, with the following button press then selecting a function shown in red with the yellow background.
Also available are buttons to select the Window currently being adjusted (A, B, C or Z) and the Output currently being adjusted (1 or 2). Their usage changes depending on the operating mode in use.
C2-8000 SERIES OPERATION MANUAL
25
Buttons to store and recall Presets are also present – along with a RST button to reset the unit back to factory settings (although a firmware update is the best way to perform this).
The right-hand side is reserved for Window changes and the TAKE button (used in the Switcher mode only).
6.1 Button controls
The following table describes the button usage on your unit.
C2-8000 SERIES OPERATION MANUAL
26
Button Button Function
Menu navigation &
adjustment
buttons.
Up / down / left / right / SELECT allow quick and easy access to various menu settings. Press and hold SELECT to store current settings into memory. They will then be restored on power-on, or when a Restore is done. See next section for more information.
PROGRAM 1/A
Sources
Selects one of the (up to 12) input sources for display. In Switcher mode, the Program output will transition to this input without the need for TAKE to be pressed. In other modes, it selects the source to use for Window A.
PROGRAM 2/B
Sources
Selects an input for display. In Switcher mode, it allows viewing of the next source on the Preview output. In other modes, it selects the source to use for Window B.
Presets 1 to 7 Recalls a preset. These start off blank, but are available to
the user. Hold the button in to store the current settings in that Preset. Hold for even longer to reset that Preset back to factory defaults.
KEY Enables keying for currently selected window – see ‘Adjust
keyers’ menu. (Key color defaults to black, so black foreground will disappear.)
ZOOM Jumps to the ‘Zoom’ menu item.
FADE Fades out the current image – fades back in on next press. FREEZE Freezes the currently selected window ASPECT Changes the aspect ratio of the currently selected window.
POS Jumps to the Pan or Pos menu item to allow immediate
panning or positioning of the image.
PIP Activate picture-in-picture mode for the currently selected
window.
SIZE Jumps to the ‘Shrink’ menu item to allow the current window
to be re-sized.
ON/STANDBY Hold in to put the unit into Standby (power-save) mode.
Press once to come out of Standby mode.
6.2 Special button combinations and functions
In addition to the ability to perform a factory reset and forcing certain output resolutions, other button combinations are available:
These button combinations only work when the unit is switched on and active i.e. with the STANDBY/ON LED is off. They will not work in Standby mode, or during power-up.
6.2.1 Saving current settings
Press and hold the SELECT button until a beep is heard and the unit shows ‘Settings stored’.
Loading...
+ 106 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use