Tvone 1T-CL-322-EU, 1T-CL-322-US Instruction Manual

Page | 1

Instruction Manual

1T-CL-322-EU

15 Button Wall Plate Control Keypad

&

1T-CL-322-US

16 Button Wall Plate Control Keypad

1T-CL-322

1T-CL-322

Page | 2

Table of Contents

Liability Statement ................................................................... 4

Safety Precautions ................................................................... 5

Introduction ............................................................................. 5

Requirements .......................................................................... 6

Package Contents .................................................................... 6

Features ................................................................................... 6

Operation Controls and Functions ........................................... 7

Front and Rear Panel ........................................................... 7

Telnet Commands ................................................................ 8

Software Application ......................................................... 10

Telnet Control .................................................................... 11

WebGUI Control................................................................. 12

Macro Settings ................................................................... 13

Extension Macros .............................................................. 16

Command Settings ............................................................. 17

Command List .................................................................... 18

Schedule ............................................................................ 20

Network Settings ............................................................... 21

System Settings .................................................................. 22

System Time ....................................................................... 23

Sample Application Diagram ................................................. 24

Sample Ethernet Commands ................................................. 24

Button Labels ......................................................................... 25

Page | 3

Updating Firmware ................................................................ 26

Specifications ......................................................................... 27

Acronyms ............................................................................... 27

Limited Warranty ................................................................... 28

Regulatory Compliance .......................................................... 29

Contact Information .............................................................. 30

Page | 4

Liability Statement

This product is intended for professional use. This product is not
intended for use in a medical environment and does not have the
required certifications for such use. Similarly, use aboard any
aircraft or spacecraft while in flight or as an adjunct to any
surface, airborne or marine navigation system or any offshore
marine activity, including control of any watercraft, or any use
similar to those specifically herein mentioned is prohibited. Use in
the aforementioned circumstances would require additional
testing and certification.

No warranty is made either expressed or implied including but
not limited to any implied warranties of merchantability or fitness
for a particular purpose. In no event shall the supplier or
manufacturer of this product be liable for errors found within, or
be liable for any direct, indirect or consequential damages or loss
in connection with the purchase or use of this hardware, software
or manual. The sole and exclusive liability to the supplier and
manufacturer regardless of the form of action shall not exceed
the replacement cost of the materials described herein.

tvONE reserves the right to revise any of its hardware and
software products following its policy to modify and/or improve
its products where necessary or desirable. This statement does
not affect the legal rights of the user in any way.

By using this equipment you have indicated that you have agreed
to the terms listed above. If you do not wish to agree or the
above terms are contrary to your conditions of purchase you may
return the equipment, unused, to your supplier.

All third party trademarks and copyrights are recognized. The
tvONE logo, Magenta logo, CORIO word and the CORIO logo are
registered trademarks of tvONE. All other trademarks are the
property of their respective holders.

E&OE

Page | 5

Safety Precautions

Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this
equipment:

 Always follow basic safety precautions to reduce the risk of

fire, electrical shock and injury to persons.

 To prevent fire or shock hazard, do not expose the unit to

rain, moisture or install this product near water.

 Never spill liquid of any kind on or into this product.
 Never push an object of any kind into this product through

any openings or empty slots in the unit, as you may damage
parts inside the unit.

 Do not attach the power supply cabling to building surfaces.
 Use only the supplied power supply unit (PSU). Do not use

the PSU if it is damaged.

 Do not allow anything to rest on the power cabling or allow

any weight to be placed upon it or any person walk on it.

 To protect the unit from overheating, do not block any vents

or openings in the unit housing that provide ventilation and
allow for sufficient space for air to circulate around the unit.

Introduction

The 1T-CL-322 Control Panel is designed for system installers to
control devices through an Ethernet connection and Relay
output(s) capable of supporting DC 0-24V/8A. The EU version has
15 direct macro command buttons, the US version has 16. There
are an extra 15 or 16 ‘Extended macro’ commands available
through the WebGUI control. Each Extended macro allows an
additional 16 commands to be executed within one push. A total
of 128 commands can be stored in the unit, each command can be
up to 128 characters in length. Each button offers red and blue
LED backlight to create various color themes or to show

Page | 6

activation of a command. The controller has PoE (Power over
Ethernet) functionality to power the unit and a dc power supply is
also included. Commands can be scheduled by time or date using
the internal clock and calendar functions within your
programming.

Requirements

Active Ethernet connection from switch or router.

Power to the unit via either Power over Ethernet (PoE) or using
the supplied DC power supply.

Package Contents

 Wall Plate Control Keypad
 USB Type A to Mini USB OTG Connector
 3.5mm Terminal Block (2x EU and 1x US models)
 5 Volt / 2.6 Amp DC Power Adaptor
 Pre-Printed Button Label Stickers
 Operation Manual

Features

 15 or 16 macro buttons (depending on regional version) with

15 or 16 virtual buttons through WebUI with up to 16
commands per macro, 128 commands stored on the control
system

 Relay(s) to control other devices supports DC 0-24V/8A
 Scheduling control system and settings
 Can be controlled by Key Pad, Telnet and WebGUI
 Supports PoE function or DC power supply selection

Page | 7

Operation Controls and Functions

Front and Rear Panel

EU version US version

Macro Buttons: Each button can support up to 16 commands and
has 2 LEDs, one red and one blue, adjustable from 0 to 100%. (For
further detail on settings please refer to the WebGUI Control
section)

Ethernet: Connect to an active Ethernet connection, or direct to a
PC or Laptop. This connection supports PoE when connected to
an Ethernet switch that supports 48v PoE. The unit can be
powered without the external 5 volt DC power supply.

DC 5V: Plug in the 5V DC power adaptor (included) and connect to
AC wall outlet. Please note, this not necessary if using PoE.

Relay out: Connect to a device that requires 0 to 24V/8A DC
power via a relay or contact closure switch.

1T-CL-322

1T-CL-322

Page | 8

Telnet Commands

COMMAND

DESCRIPTION

PARAMETER

IPCONFIG

Display the current IP
configuration

NONE

SIPMODE

Set Ethernet IP mode

N = STATIC/DHCP

SIPADDR XXX.
XXX.XXX.XXX

Set Ethernet IP address

XXX = 0 to 255

SNETMASK XXX.
XXX.XXX.XXX

Set Ethernet Subnet mask

XXX = 0 to 255

SGATEWAY XXX.
XXX.XXX.XXX

Set Ethernet gateway

XXX = 0 to 255

VER

Show unit firmware
version

NONE

FADEFAULT

All configurations set to
factory default

NONE

ETH_FADEFAULT

All Ethernet
configurations set to
factory default*

NONE

REBOOT

System reboot

NONE

HELP (?)

Show command list

NONE

HELP N

Show description of
command

N = COMMAND
NAME

RELAY N N1

Relay control

N = PORT (1 or 2) N1
= OPEN/CLOSE/

TOGGLE

LEDBLUE N N1

LED blue backlight
control

N = BUTTON (1-15/16)

N1 = % (0-100)

LEDRED N N1

LED red backlight control

N = BUTTON (1-15/16)

N1 = % (0-100)

Page | 9

COMMAND

DESCRIPTION

PARAMETER

LEDBLUES N

All blue LED backlight
control

N = % (0-100)

LEDREDS N

All red LED backlight
control

N = % (0-100)

LEDSHOW N

LED dimming mode
control

N = ON/OFF/TOGGLE

BACKLIGHT N

All LED backlight control

N = % (0-100)

KEY_PRESS N
RELEASE

Key press trigger type
(Press and RELEASE)

(Default)

N = PORT NUMBER

KEY_PRESS N
HOLD

Key press trigger type
(Press and HOLD)

N = PORT NUMBER

MACRO RUN N

Run specific Macro **

N = MACRO ID (1-30/32)

MACRO STOP

Stop Macro

NONE

MACRO STOP

Stop specific Macro

N = MACRO ID (1-30/32)

@MACRO_FA
DEFAULT

All Macro control set to
factory default***

NONE

Note:

All commands require carriage return at the end of the command string.
Commands are case-insensitive.

*Command resets IP address and login ID & password back to factory
default.

**Extended Macros are 16-30 on the EU version and 17-32 on the US
version.

***Command resets macro 1 through 6 to factory default and deletes
macros 7 through 30.