TViX M-4130SH User Manual
User Manual
TViX PVR M-4130SH
All specifications and information are subject to changes without further notices.
Safety Notice
Do not disassemble the device. It may
cause malfunction or fire
.
Magnetic material may erase the data in TViX.
Keep any magnetic material away from TViX.
.
Do not expose TViX to oil, smoke,
water, humidity and dust.
Do not touch power plug with wet hands or do
not use defective power cable & loose outlet. It
may cause electric shock or fire
.
Keep TViX away from heat or fire.
Do not block any ventilation openings. Ensure
that a free airflow is maintained around the
appliance.
Be careful not to drop TViX from a height.
It will damage the internal hard drive.
Do not take out the internal hard drive by yourself. The internal hard drive is very hot when it is
working. The warranty will be void if any other hard drive is inserted into TViX.
"Do not block any ventilation openings. Ensure that a free airflow is maintained around the appliance."
The socket-outlet shall be installed near the equipment and shall be easily accessible.
2
Usage Precautions
Please read the following usage precautions before using your TViX.
Connect the A/V cable
Make sure the power is off when you connect the A/V cable between the TViX and the TV.
Cleaning the TViX
When cleaning the TViX product, pull out the power cord and then wipe it with a soft piece of dry cloth.
TV out, ZOOM, and default volume depend on the TViX’s setting.
Checking Digital signal Reception
• Press the INFO button on the remote control. The Signal strength meter will appear on the left-bottom.
• If signal strength meter indicates less than 14.9db, adjust your antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest signal.
Record Notice
• The first partition of the internal hard disk must use the NTFS format. FAT32 format can cause an error
message.
• When the signal is weak or unstable, recording cannot work properly.
• When the hard disk is unstable, recording cannot work properly. So you must run Check Disk
sometimes.
• Hard disk requires the Check Disk, you must run the Check Disk sometimes
DTV EPG
• HDTV EPG(Electronic Program Guide) shows the stream guide of real time.
• You can use the scheduled recording and scheduled watch using this EPG window.
• To use this EPG guide, you must view the digital channels in advance.
Analog channel
TViX PVR does not support analog (PAL) broadcasting and cable.
To use the analog channel, use a RF splitter. (We don’t support RF splitter in the package.)
Connect USB cable
When connected to the computer through the USB cable the TViX acts as an external USB storage device
(In this state, there is no video/audio output and the VFD will show as USB ON). For normal TViX play mode,
disconnect the USB cable connected to the computer and turn on the TViX.
Detaching the HDD
When detaching the HDD, please let the heat out sufficiently.
3
Usage Precautions
Supplied cables
The supplied cables and accessories are recommended for customized best performance of the TViX.
Using other cables or accessories may not provide best performance.
Unplug the device
If you want to unplug the device, press the Stop button in 'Unplug or Eject Hardware'.
HDD Partition
Windows 98SE and Windows ME does not support NTFS file format. However, NTFS file format is
available on Windows 2000/XP. “Primary Partition” is recommended when creating two or more partitions
with a single hard disk drive.
FAT32 Partition
If you choose FAT32 file format on Windows 2000/XP, the drives maximum size will be limited to 32GBs.
If you want to use a single drive letter of 32GBs or more, you have to format on Windows 98SE/ME.
We don’t recommend the FAT32 partition to record the DTV channel.
NetShare program
You can download NetShare installer from our website www.tvix.co.kr/Eng before you configure NFS network.
Please refer to the Netshare program manual for detailed instructions.
http://www.tvix.co.kr/eng/support/Manual.aspx
Wireless Network
Before using the wireless network, Please refer to the TViX homepage(www.TViX.co.kr/Eng) for a list of
compatible wireless devices.
Certification sticker
The certification sticker mark is on the bottom of the device.
Remote-numeric key
You can insert the character using remote-numeric key. Number 1 key is changed as @Æ : Æ / Æ _ Æ -
when this key is pressed.
** Some functions will require you to update the firmware in first.
4
Table of Contents
Safety Notice .............................................................................................................................................. 2
Usage Precautions ..................................................................................................................................... 3
1 Introduction................................................................................................. 6
1.1 HDTV PVR .................................................................................................................................. 6
1.2 Multimedia Player ....................................................................................................................... 7
1.3 Audio Player ............................................................................................................................... 8
1.4 External Storage ......................................................................................................................... 8
1.5 Specifications .............................................................................................................................. 9
2 Name of Each Part .................................................................................... 10
2.1 Control Panel ............................................................................................................................ 10
2.2 Cable Connection ..................................................................................................................... 10
2.3 Package Contents .................................................................................................................... 10
3 Installation and Connection ..................................................................... 1 1
3.1 Making an HDD Folder .............................................................................................................. 11
3.2 Video Connection ..................................................................................................................... 12
3.3 Audio Connection ..................................................................................................................... 14
3.4 Antenna Connection ................................................................................................................. 15
3.5 LAN Connection........................................................................................................................ 16
3.6 HDD Installation/Exchange ....................................................................................................... 25
4 TViX HD Setup Menu ................................................................................ 27
4.1 Audio/Video Setting .................................................................................................................. 27
4.2 MISC Setting ............................................................................................................................. 29
4.3 Network Setting ........................................................................................................................ 30
4.4 HDTV Setting ............................................................................................................................ 31
5 Easy Usage of TViX HD ............................................................................ 32
5.1 Play Video Files ........................................................................................................................ 32
5.2 Play Audio Files ........................................................................................................................ 33
5.3 Play Image Files ....................................................................................................................... 34
Using the remote control ......................................................................... 35
6
6.1 Basic Functions ........................................................................................................................ 35
6.2 Descriptions of Each Buttons ................................................................................................... 36
6.3 Extra Features .......................................................................................................................... 43
7 Using TViX PVR ........................................................................................ 47
7.1 Using DTV Channel .................................................................................................................. 47
7.2 DTV Recording ......................................................................................................................... 48
7.3 Using DTV Remote ................................................................................................................... 52
8 Firmware Upgrade .................................................................................... 56
9 Using USB Connection with the PC ........................................................ 58
9.1 Windows 98SE Driver Installation ............................................................................................ 58
9.2 Making a Partition and Formatting the HDDs under Windows 98SE / ME ............................... 62
9.3 Making a Partition and Formatting the HDDs under Windows 2000 / XP
9.4 Unplug or Eject Hardware ........................................................................................................ 67
10 Appendix - Technical Terms .................................................................... 68
11 GNU General Public License ................................................................... 70
/VISTA..................... 64
5
1 Introduction
1.1 HDTV PVR
The TViX PVR is designed for high definition digital terrestrial TV receptions within TViX
environment in compliance with the DVB-T digital terrestrial standard..
TViX PVR has the various recording features like direct recording/scheduled recording and
repeated manual recording, so you cannot miss single program of digital TV. It's a
completely different type of PVR since you can easily upgrade and expand the capacity of
HDD by themselves like PC upgrading. And you can backup the recorded file to/from the
PC.
TVIX PVR can play HDTV without a digital TV set-top box with
excellent and super-clear display on HDTV screens
TViX PVR implements all the DVB-T features like EPG/scheduled recording/ PCconnectivity and this will let user enjoy all the fruits of the digital broadcasting as well as the
supreme audio and video qualities. You can use the scheduled recording and scheduled
watch using this EPG window.
When using the HDTV mode, you can configure the sleep time. If the sleep time is
reached when the recording is in progress, the TViX will shut down after finishing the
recording .
This model does not support analog (PAL) broadcasting. If you want to use the analog channel, you have to
use the RF splitter.(We don’t support RF splitter in the package.)
We don’t have any warranty or responsibility for the recoding file.
6
1.2 Multimedia Player
TViX HD plays back DVD movies with the full functionality of DVD navigation. You can
create your own virtual DVD library by storing your personal collection of DVDs in .ISO
or .IFO format and watch them exactly as if they were running from the original DVDs (all
original features included: Menu, Chapter, Audio Stream, Subtitle, Fast Forward, Rewind,
Slow, Pause, Step Forward, Repeat, Search etc.).
TViX HD plays back high definition video (up to 1920x1080P) and still images. Prerecorded HDTV programs from a digital TV set-top box or personal digital video contents
taken by a HDV™ camcorder can be played back with the TViX HD on a high definition
display. The TViX HD features a HDMI connector and component, which will match the
high resolution of HD level video contents.
Using the latest EM8623 processor, TViX HD supports the latest multimedia formats
MPEG-4 AVC(H.264), VC-1( MP@HL, AP@L3), WMV9 & WMV HD as well as MPEG4
3.11,4.0 , 5.0. H.264 is a brand-new and superb compression technology today. It makes
you more stunning HD movie with lower storage capacity.
TViX HD is a standalone, multimedia hard disk player which plays
digital videos, digital music, digital still images and DVD files to a
TV display and home entertainment system. You can enjoy digital
contents in your living room without having to burn discs or
having to play it back on a DVD or CD player anymore.
HDMI provides unparalleled qualities to digital video and audio, while DVI only serves
digital video. You don’t have to mess around with several AV cables. It provides single,
pure and simple way to connect your display. It can deliver uncompressed digital video
up to 1080p as well as multi-channel digital audio.
TViX HD supports DTS hardware decoder to mix DTS sound into 2 channels for a more
dynamic sound quality.
The TViX HD can be networked with a PC system using its built-in LAN port. You are
able to navigate to a PC file through TViX HD’s wired or wireless network and play the file
from its original destination without having to copy it into the TViX first. We’re supporting
the file copy via LAN.
With two USB2.0 host ports, you can now attach additional external USB hard drives to
further extend the storage capacity. You can also playback files from a digital camera,
USB flash driver, USB flash card reader, or a MP3 player.
Manufactured under license from Dolby Laboratories.
"Dolb
y" and the double-D symbol are trademarks of Dolby Laboratories.
** For the further functions, please refer to following FAQ- http://www.tvix.co.kr/eng/faq
7
1.3 Audio Player
TViX HD can play a variety of audio files such as FLAC,MP3, Ipod M4A, Ogg Vorbis or WMA (Windows
Media Audio) through the TV speaker and any other audio systems. You can listen to your favorite music files
nonstop, by organizing a custom winamp playlist. Now you can enjoy music all day without changing CDs.
TViX supports the internet radio of shoutcast streaming format(.pls,.m3u).
You can watch picture slideshows with the option of background music (supports music slideshows using
picture images).
1.4 External Storage
If you connect to a USB 1.1 port, the TViX HD will work at USB 1.1 speed, so we strongly recommend that
you use USB 2.0.
It can be used as an external device to save video, audio, image files, data, program backups, etc.
USB 2.0 enables TViX HD to become an external storage device which supports up to 480Mbps.
It supports Plug & Play, so Windows will automatically recognize TViX HD.
If you connect the USB port when playing the TViX HD, the VFD will show as USB ON. When you
disconnect the USB, you do not have to reboot the TViX HD for continuous use.
If you are a Windows98SE user, you should download a USB storage driver from our website
www.tvix.co.kr
Windows ME/2000/XP.
before you connect your TViX HD with your system. You do not need to install a driver in
You can download NetShare installer from our website www.tvix.co.kr/Eng before you configure NFS
network. If you select to NFS mode, you can play the TP or DVD jukebox without stutter.
8
1.5 Specifications
Main
Chipset
VFD
Display
Video
Audio
Photo Lossless JPEG (Progressive JPEG not Support)
Connectivity
Sigma Design EM8623
7 Alpha-Numeric Character
5 Digit Numeric Display
Format :.wmv, .avi, .mpg, .vob, .mp4, .asf, .tp, .trp , .IFO, .ISO, .m2t,.m2ts ,.mov(H.264)
Codec : MPEG 1 / 2 / 4, AVI, XVID, WMV9(MP@HL), H.264/ AVC , VC1(
MP@HL, AP@L3)
Resolutions up to 1920*1080P
MP3, WMA, AAC, Ogg, PCM, M4A, AC3,FLAC, WAV
DTS Pass Through and Down Mixing
USB2.0 Host 2 Ports
USB2.0 Target 1 Port
LAN (10/100Mbps)
WLAN 802.11g (optional)
Video
HDMI 1.1, Component, S-Video, Composite
AV In / Out
File
Formats
Subtitle
Hard Disk SATA HDD only (SATA I, SATA II HDD)
ODD
Support
Language
FAN 40mm Brushless FAN
FAN Control Temperature Sensing, Variable Speed
Flash ROM 16 M byte
Internal
Power
Size 183x139x75 mm
Audio
Digital : Coaxial, Optical / Analog: Stereo
DVB-T DTV Antenna port(Australia/Europe)
NTFS, FAT32(S-ATA HDD only, supports S- ATA 1,2)
DTV Recording : 7200rpm, NTFS
Text Subtitle : smi,sub,srt,lrc,txt
Image Subtitle : sub (with idx)
Through USB 2.0 Host
English, French, German, Spanish, Italian, Swedish, Czech, Russian, Mexican,
Japanese, Chinese, Korean
90~250V Free Voltage, , 50/60Hz, 50W
Weight 1.3Kg (HDD included)
9
2 Name of Each Part
2.1 Control Panel
Basic functions can be done without the remote control.
2.2 Cable Connection
You can connect the TViX to a TV display or audio Amplifier using the A/V cable. There is detail instruction
for tuner box on the quick guide of optional tuner box package.
HDMI OUT
POWER
USB HOST
LAN
Composite/S-video
COMPONENT
Coaxial
Stereo
USB PORT
Optical Out
HD Tuner port
Cooling FAN
2.3 Package Contents
TViX main unit Power cable A/V cable USB Cable Manual TViX Remote
10
3 Installation and Connection
3.1 Making an HDD Folder
1. As shown in the picture below, one end of the USB cable should be connected to the USB connector of
the TViX and the other end to the computer.
CAUTION!
The USB cable has a different shape on both
ends. We use a USB 2.0 type "A" Plug(male)
to "B" Plug(male).
2. After connecting to the PC, turn on
the power of the TViX.
3. Double click the icon ‘My
Computer’ on your monitor and you
will see a newly created drive; TViX
as shown in picture ‘A’.
( The name of the drive can be
changed.)
4. For easy usage, double click TVIX
and make separate folders named
video, audio, and photo. Then store
all your files accordingly to each
folder.
11
3.2 Video Connection
We support HDMI, Component, S-Video, Composite video output for connecting to the TV and each output
needed to change settings on the TViX HD.
The highest quality components are as follows: HDMI > Component >S-Video > Composite.
3.2.1 Connection with an Ordinary (Composite) TV Output
Connect the TViX HD and your TV using the yellow video cable.
Turn on the TViX HD and TV. Select an appropriate video input mode on your TV until you get the initial TViX
HD screen.
3.2.2 Connection to S-Video Output
Connect the TViX HD and your TV using the S-Video cable.
Turn on the TViX HD and TV. Select an appropriate video input mode on your TV until you get the initial TViX
HD screen.
(The S-Video cable is not included and has to be purchased separately.)
12
3.2.3 Connection to Component Output
Connect the TViX HD and your TV with the component cables.
Turn on the TViX HD and TV. Select an appropriate video input mode on your TV (in this case, the
Component input mode)
3.2.4 Connection to HDMI Output
Simply connect your TViX HD to the HDMI port on the TV.
TViX plays back high definition video (up to 1920x1080P).
With HDMI to HDMI cable, you don’t need to connect additional audio cable.
CAUTION
After you connect the video cable to your TV, press the TV Out button repeatedly on your remote control
until you get the initial TViX screen.
When you connect to HDMI port, press TV OUT button until you can see EDID on VFD.
* The component or HDMI cable is not included in the TViX and must be purchased separately.
13
3.3 Audio Connection
3.3.1 Connection to 2 CH Normal TV
Connect the left(white) and right(red) sound output to the appropriate terminal of your TV or Hi-Fi system.
3.3.2 Connection to 5.1CH Amplifier (Digital)
If you have a multi-channel decoder/amplifier with an optical/coaxial input, you can enjoy 5.1 CH high quality
sound through the coaxial or optical cables.
The illustration on the left shows where to connect the coaxial cable. Optical cable connection is done in a
similar method.
(These cables are not included in the package and must be purchased separately.)
CAUTION
If no sound is heard after connecting the Optical or Coaxial Cable, you have to change the audio setup of
TViX to Digital.
.
14
3.4 Antenna Connection
Before connecting the Antenna, the TViX’'s power should be turned off. We recommend using a threaded-
type antenna connector. Move clockwise to tighten.
To improve the picture quality in a poor signal area, please purchase a signal amplifier and install properly.
< Connection of the RF splitter >
This model does not support analog (PAL) broadcasting. If you want to use the analog channel, you have
to use the RF splitter. (There is no this splitter in the package, you should buy it yourself.)
You can play the analog channel on the TV and HDTV on the TViX’s external input①
Connect antenna to IN port of RF splitter.②
Connect one OUT port to the TV antenna input and the other to the HD Tuner.③
Connect the TViX’s video output to TV’s input.④
To receive the digital signal, it's best to use an outdoor Digital Ready antenna but in some areas you ⑤
may be able to get reception from an indoor antenna. To improve the picture quality in a poor signal area,
please purchase a signal amplifier and install properly.
15
3.5 LAN Connection
3.5.1 Connect PC via Network
< When connecting the computer directly to the TViX HD >
Connect the LAN cable to the LAN port of both the TViX HD and the PC.
TIPS
In this case, you generally use a LAN cross cable type.
If the computer’s LAN card was connected to an Internet line, you can install an additional LAN
card to your PC and connect that LAN card to the TViX.
< When connecting with IP Router or Hub >
Connect the LAN cable to the LAN port for an IP Router or Hub.
TIPS
In this case, you generally have to use Direct LAN Cable type.
With NFS, TViX can play tp files on a PC flawlessly through LAN.
We recommend NFS connection than SAMBA. You need to install TViX Netshare program on a PC but the
setting became much easier SAMBA method.
You can download NetShare installer from our website www.tvix.co.kr/Eng
Please refer to the Netshare program manual for detailed instructions.
http://www.tvix.co.kr/eng/support/Manual.aspx
You may skip the 3.4.2 section if you select to NFS network.
16
before you configure NFS network.
3.5.2 Set Network Configurations Under Windows XP (SAMBA mode)
1) Select the folder you want to share. Right-click that folder
and click ‘Sharing and Security’ in the popup menu.
2) Check ‘Share this folder’ on the network and type in the
share name ‘tvixhd1 (this is the only available one at the
moment)’.
3) Use ‘Everyone’ if ‘Everyone’ is displayed, otherwise you
don’t have to change anything. Also, add ‘Everyone’ to the
security tab.
4) After that, the shared folder will be displayed like the
following picture.
17
5) Move to 'Settings' > 'Control Panel' > 'Administrative Tools' > 'Computer Management' > 'Local Users and
Groups' > 'Users', and double click ‘Guest’.
CAUTION
This is for Windows XP Professional. Windows XP Home users cannot see this window. If you cannot
find ‘Administrative Tools’ in the Control Panel, click “Switch to classic view” in the upper-left corner of
the screen.
6) Uncheck ‘Account is disabled’
18
7) ‘GUEST’ must be shown as the following image (a red X mark should not be shown on ‘Guest’).
8) Move to 'Control Panel' > 'Network connections', and select ‘Local area connections’ properties by right
clicking the mouse.
9) Remove “Guest” from the ‘User Rights Assignment’ > ‘Deny access to this computer from the network’
option.
19
10) Move to ‘Access this computer from the network’, and then select ‘Properties’ by right clicking the mouse
or double clicking it.
13) Press OK, and Guest will be registered.
11) Click ‘Add User or Group’
12) Type in “Guest” and then click the “OK” button.
20
< When connecting Computer to TViX directly >
In this case, you have to use Cross LAN cable type generally..
If the computer’s LAN card was connected to Internet
line, you can mount additional LAN card to your PC
and connect that additional LAN card to TViX.
1. Move to ‘Control Panel’ > ‘Network connections’, and select ‘Properties’ properties by right click of mouse.
2. When Windows 2000 or XP, Check “Allow other network users to connect through this computer’s internet
connection”
3. Double click ‘TCP/IP->LAN card’ that you want to use on your computer. You must select the additional
LAN card.
Check ‘Specify an IP address’, and write ‘IP address’ & ‘Subnet mask’ that you want to use.
Ex) IP address : 192.168.0.1 Subnet mask : 255.255.255.0
21
< When connecting with IP Router or Hub >
If you have already been provided a dynamic IP address from a DHCP Server or IP Router in your local area
network, you don’t need to write a static IP address. Use ‘Obtain an IP address automatically on’ or write an
IP address & Subnet mask that the DHCP Server or the IP Router provides.
Select ‘Control Panel’ > ‘Network Connections’, and select ‘Status’ properties by right clicking the mouse.
After clicking the Support tab, you should see an IP Address. (ex: 192.168.1.127)
< Disable Windows Firewall >
14) Move to ‘Control Panel’ > ‘Network Connections’, and select ‘Properties’ by right clicking the mouse.
Click the ‘Advanced’ tab. Disable ‘Internet Connection Firewall’.
15) If you use service pack 2, click ‘Settings’ at ‘Windows Firewall’.
16) Check ‘Off’ and then click ‘OK’
22
Loading...