Tview T712HR-IR User Manual

Download

Page 1

7" 16:9 TFT LCD MONITOR

OWNER'S MANUAL

T712H R-IR

POW

T712HR-IR

Page 2

Thank you for your purchasing LCD monitor. Please read this manual carefully before operating and reserve it for future reference. It will be helpful to you if you encounter any operational problem.

Appearance and function

MODEL:T712HR-IR

T712H R-IR

Noted: This product is for touch influence type button. More convenient for operation. Just touch the button, the button indicator light will flicker; The unit can adjust to the picture which you need for .

POW

1). –: MENU adjustment reduce.

2). +: MENU adjustment increase.

3).POW: Power on or off.

4).MENU: Menu adjustment.

5).V1/V2: Display mode switch.

6).Remote control window.

7).IR transmit window

1 234

Security Advices

Specification

Name: 7” TFT LCD Monitor Resolution : 480x3(RGB)x234 System: PAL/NTSC Power: DC12V 1 A ±10% Power consum ption: 6W Signal: AV1/AV2+IR Screen size: 7"( 16:9) Remote control : full function remote control operation.

Connections

Groun d

12V DC

Fuse bo x

i e h

RC R d

RC W

1 V

Av2

A ow

low

e Y

RC Y

·Before using the device, please check it for any possible damages. In case of damage do not operate it.

·Unplug the device if you do not use it for a certain time.

·The device may not become subject of mechanical stress and should not be exposed to humidity.

·To be considerate of the ventilation do not cover the device and protect it from direct solar radiation.

·Clean the device with a dry and soft cloth only.

·Caution! Should the device itself get damaged, please let the repair to the

manufacturer or to a qualified service agent.

·Please dispose packaging materials properly and do not let play children with it.

·The device itself is no toy either. Do not let children play with it too

01 02

CAUTI ON:

pleas e obser ve the right p olari ty of the cables an the r ight co lours of the R CA-pl ugs

Page 3

Remote Control

POWE R

V1\V 2

COL

SYS

3 4

5 6

1.Pow er: Turn on /off po wer

2. : Pres s them to inc rease an d de cr ea se the bri ghtness.

3. COL: Press the m to increa se and decr ea se the color.

4. : Pres s them to inc rease an d de cr ea se co nt rast.

5. : Pres s it to se lec t the mode (st an da rd, light, so ft, vi vi d, m emory)

6.Rev erse: Turn the picture from lef t to righ t or up to down.

7.V1/ V2: AV1/ AV2 to switch

Precautions before using remote control unit

Remote control unit operating range

The machine equipped with IR audio tran smitter, frequency

IR:

(2.3MHZ, 2.8MHZ), please choose a sui table infrared receiver headset answering, recei ving distance in a straight line within 3 meters IR emission from AV1/AV2 audio control, as long as the boot, with the audio input can be launched

AV Display Mode:

Operating method: Press the button “V 1/V2” on the remote control or the unit to choose AV display mode. If the VC D or DVD signal is connected, there should be di splay normally pictures

signal; If the VCD or DVD signal isn't conn ected, the screen is blue. the system will display “NO SIGNA L”.

1. BRIGHT

2. COLOR

3. CONT

4. TINT(only NTSC syste m)

5. LANGUAGE

6. SCALING(16:9/4:3)

Replacing the battery

The above functi ons can be executed by MENU on the display or remote contro l unit.

Press the MENU of unit , you can choose “BRIGHT” “COLOR” “CONT” “TINT(ONLY NTSC SYSTEM)” “LANGUAGE” “SCALING”, then press “+” “-” on the unit to adjust that you need. Or press / col / “ ” “ ” on the remote control directly adjust “BRIGHT” “COLOR” “CONT”

Page 4

Simple Trouble-Shooting Guide

If your product fails, p lease fol low the way of exclusion , if it is stil l unresolved, please c ontact th e professional or supp lier.

Symptom

Black Screen

NO picture

color picture

With a little regular light spots and color spots on the screen or black horizontal line in the picture

Unclear picture

Probable Caus e

1.No12 voltage

2.Brightness or contrast ratio is too small

3.no high-voltage

1.No sources output

2.The video concentric plug becomes loose

1 Vid eo so urc es ha ve no output

2.Color ratio should be re-adjust

It is normal symptom in the active matrix display technology.

1.Poor quality of the video sources

2.Bright &Contrast

Solution

1 .check the power is on or connect rightly

2. check the A/V Cable is loose or not

3. Increase the brightness and contrast ratio

1.Check the output of VCD or DVD

2.Replace with the A/Vcable

3.Tigh ten t he Video input cable

1.check the video sources

2.Enter into the Menu to re-adjust

it is normal symptom in view range with a little regular light spots on display screen.

1.Replace with the high quality videodisc

2.Reset Bright &contrast.

1.The surround temperature should not exceed to 0-60 degrees.

2.Turn o ff the power after using the unit.

The outer cover of the monitor has been deformed

1.External temperature is too high.

2.The power has not been switched off for a l ong t ime .

ALARM

For you r safety, dri ver a re advi sed not to wat ch the displ ay when d riv ing. It's pr ohibited i n law of so me countri es when driv ing and oper ating t o watch d isplayer.