This product without waterproof function. To avoid the risk of fire breakout or electric
shock, please do not expose this unit in the rain or moist environment. Do not open
the cabinet. Such operation will absolve relative maintenance guarantee. Only the
legally authorized professionals are allowed to conduct such operation.
LASER: This unit installs a laser system. To ensure proper use of this product,
please read this owner's manual carefully before operating this unit and keep it for
future reference. If the unit requires maintenance, please contact an authorized
professional. Please operate according to correct process in order not to hurt by
laser beam.
Please use this unit at normal temperature. Do not put the unit under -10 degree or
higher than +60 degree environment. Otherwise it will distort the plastic shell,
debase the display quality and products quality.
Installation should be very tight and secured to prevent the fallen unit hurt people
!!
and damage the unit when moving on or a sudden brake.
Please install carefully to avoid damaging working platform. Please clean the
internal working platform, and ensure sufficient space for installation. Inner shell will
be installed on the working platform. Then install the mainframe, connecting the
power and video signals jack, then put mainframe into the shell. Then assemble the
shell with the mainframe device.
Please do not try to repair display device by yourself. It is made up of many precision
electronic elements, and any dismantlement or refit will make it damaged or broken.
If any problem on the unit, please switch off the power immediately, and consult your
nearest seller or distributor.
Please keep the monitor away from the pollution of moisture, dust, water soot etc.
!!
Please switch off the power immediately if any moisture or other objects pollute,
please contact the seller or distributor.
If you drive with the sound at a level preventing you from hearing sounds outside the
!!
car please keep the unit at an appropriate sound level, otherwise this may aff ect
your driving and cause an accident.
For your safety, please do not watch or operate the monitor when you are driving.
!!
The apparatus shall not be exposed to dripping or splashing and that no objects
!!
filled with liquids, such as vases, shall be placed on the a pparatus.
Preface
Thank you for your support of the company’s products and options. This unit is crystallization
of the modern high-tech. It is a cross-functional player mode and adjustable true color LCD
automatic retractable screen LCD touch screen. Allows you to be arbi trary choi ce To
appreciate the program. Here, we wish you to personally experience this hi gh-tech products
can be Perfect fun and enjoyment. To ensure proper use of this product, please read this
owner’s manual carefully before operating this unit and keep it for future reference.
Note: The graphics of this manual are for your reference only, please in-kind products prevail.
Main Features
1.7” Wide screen TFT LCD high-definition media player monitor.
2. This unit is with touch icon interface and touch button icon.
3. Built-in AV / DVD / USB / SD / FM/AM /Bluetooth function.
4. DVD/VCD/MP3/CD/MPEG compatible.
5. FM/AM digital synthesizer tuner with 30 memory presets.
6.Intelligentize bluetooth function, for you to make and answer the phone comfortably.
7. Built-in 4X25W power amplifier, 4.1 soundtrack audio output, can connect to external
audio device.
8. Signal: 1 video output, 1 video input.
9. Under car reverse mode, can auto switch to the reversing mode, if connect to the camera,
can observe the back side of car to ensure the safety.
10. Menu function: all function is operated by OSD menu.
11. Display system: AUTO/PAL/NTSC.
12. Auto memory: all the feature or position adjustment can be auto memoried and will auto
resume.
13. Support USB/SD card to play MP3/MP4/WMA/AVI/JPEG media format.
14. Remote control: full function remote control operation.
15. Picture pixel:800*480
16. Power: DC 12V ±10%; Low power consumption: ~25W.
17. Working Temp: -10℃~60℃.
18. Max Current: 10 A.
19. This unit has anti shock function.
12
User Introduction
1. Please connect the signal cable with power cable according to “Unit rear side connection” to
connect to power and signal.
2.After connect to power, press the power button, screen to enter the main interface.
3. When display DVD or VCD disc, the unit is automatically identify the video system PAL and
NTSC.
4. Can through the button on panel to adjust the function. And can use the remote control or
touch screen to adjust the function.
Wiring Diagram
Purple/FR+
Grey/RL+
Grey(Black)/RL-
White/RR+
White(Black)/RR-
Blue(Black)/REARVIEW
Blue/AMP-CON
Brown/Steering Wheel Button 1
Brown(Black)/Steering Wheel Button 2
1. Black/Steering Wheel GND, Black/GND: connect to ground.
2.Green(Black)/FL-: Front left audio output (cathode).
3.Green/FL+: Front left audio output (positive pole).
4 .Purple(Black)/FR-: Front right audio output (cathode).
5.Purple/FR+: Front right audio output (positive pole).
6. Grey/RL+: Rear left audio output (positive pole).
7. Grey(Black)/RL-: Rear left audio output (cathode).
8. White/RR+: Rear right audio output (positive pole).
9. White(Black)/RR-: Rear right audio output(cathode).
10. Blue(Black)/REARVIEW: Car reversing cable.
11. Blue/AMP-CON:Control power amplifier switch.
12/13. Brown/Steering wheel button 1, Brown(Black)/Steering wheel button 2:
Connected to the steering wheel button (positive pole).
14. Orange/PWM: Headlight control
15. Red/ACC: Trigger power
16. Yellow/B+12V: +12V power cable.
Purple(Black)/FR-
Green/FL+
Green(Black)/FL-
Black/Steering Wheel GND
Black/GND
Yellow/B+12V
Red/ACC
Orange/PWM
Unit Rear Side Connecti on
CAM-V AU X-IN RC A-OU T RL FL
V V
GPS TV SUB L R RR FR
Brown(Black) /Steering wheel button 2
Brown/Steerin g wheel button 1
Black/Steerin g wheel GND
Blue/AMP-CON
Blue(Black)/ RERAVIEW
RED/ACC
YELLOW/B+12V
BLACK/GND
GREY(Black)/ RL-
GREY/RL+
WHITE(Black) /RRWHITE/RR+
PURPLE(Black )/FRPURPLE/FR+
GREEN(Black) /FL+
GREEN/FL-
Orange/MUTE
RADIO/TV
Cam era
YELLOW/BACK V IN
YELLOW/VIDEO IN
WHITE/AUDIO L IN
RED/AUDIO R IN
Rad io-si gnal in terfa ce
MAIN OUTLE T
CAM-V AUX-IN RCA-OUT RL FL
V V
TV SUB L R RR FR
REAR RIGHT
FRONT RIGHT
YELLOW/VIDEO OUT
WHITE/FL OUT
RED/FR OUT
WHITE/RL OUT
RED/RR OUT
SUBWOOFER
BATTERYBATTERY
REAR LEFT
FRONT LEFT
Disp lay
34
Appearance and Function Introduction
13
12
96758
234
1
RESET: Reset butto
. n.
1
MIC: Microphone.
2.
Remote control window.
3.
Power on/off button
4.
5 MODE: Display mode switch.
.
VOL-: Control for the volume reduce,
6.
and can use for MENU adjustment.
10
11
VOL+: Control for the volume increase,
7.
and can use for MENU adjustment.
.
Disc eject
8
Display panel slip out.
9
.
10 Display panel retract.
.
Mini USB connector.
11.
Disc slot.
12.
13. SD card reader.
Connect To Storage Accessories
Connecting With USB
1. Under power on mode, click the USB icon in the main interface, it will play the USB.
2. It will display “USB READ ”, then play the file.
3. Pull out the USB when you want to stop playing.
If there are some file in the memory card that can’t play, please delete it then connect to the
unit to read the file.
Connecting With SD Card
1. Under power on mode, click the SD icon in the main interface, it will play the SD card.
2. Will show can play the fi le.
3. Pull out the SD card when you want to stop playing.
Note: Please take attention for the SD card using direction, upward label side , then insert the
card.
Remote Control Operat ion
1. : Power
Press this button to turn on/off the unit.
2. : Play/Pause
3. : MUTE
4. Cursor direction key
Press these to move cursor.
5. System Select: BND/TA/SYS
6. Enter
7. Volume: VOL+/VOL-
8. SEEK- /SEEK+ : Previous/next
9. DVD Programming
10. OSD
Press it to display the disc information.
11. SEL: Sound adjustment function
12. AMS/RPT
DVD mode is Loop broadcast, radio
mode is the search channel
13. Under DVD mode, press it for shuffle
14. Number: Pilih lagu
15. AUDIO memilih mode.
16. Switching sub menu
17. Subtitle on/off
18.Anycast title, chapter, audio, subtitle
19. MODE: Change modes
20. : Stop playing
21. DVD display disc there are more
angle select (need the disc support)
22. SLOW: slow forward/slow playing
23. SETUP: DVD system setup
24. TITLE
Return to the menu title
19
1
5
4
6
20
9
12
7
13
16
10
14
26
2728 29
25. ZOOM
Press it can zoom or shrink picture
displayed
26. : Eject button.
press this button to eject or slot -in
the disc
27. : Display panel slip out.
28. : Display panel retract.
29. CLOSE: press it, the monitor will
auto-extend or return.
3
2
Precautions Before Us ing R emote Control Unit
1. Please pull out the PVC when the remote control unit is first using.
2. Don’t drop or step in remote control unit or subject it to shocks.
3. Note that it maybe impossible to operate the main unit if there are obstacles between it
and the remote sensor.
4. Using the remote control unit within the specified operating range.
1. Insert your finger nails into A and B on the diagram
below, press A according to the direction, then pull
out the battery holder.
3. Fit the battery holder back to its place.
2. Remove the old battery, then insert the new
battery into the battery holder with the + side
facing upwards.
Lit hium ba ttery (Cr20 25)
Not e:
To prevent leakage of fluid from the lithium
battery, remove the battery when not using
the remote control unit for long periods of
time(one month or more), If the battery leaks
fluid, carefully wipe it out of the battery case,
then change to a new lithium battery.
Basic Operation
1. Power on /off
Press the “ ” button on remote control, enter into power on condition, press this button
again to turn off the unit.
2. PLAY/PAUSE
On normal play disc mode, press this “ ” button to pause. Press this button again to
continue playing.
3. STOP
In play mode, press it to stop playing, press “PLAY” button to resume playing.
4. DISC IN /OUT
Press to eject the disc. The disc into the disc slot, will inhale automatically.
5. Adjust panel angle
Press “ ” “ ” button on remote control, can adjust the panel angle.
6. MUTE control
Press “ ” button on remote control to turn off the sound. Press it again will resume the
previous volume level.
Note: there are some functions no work when mute.
7. Function mode switch
Press “MODE” button on remote control to switch the mode. But if the unit without disc/SD/
USB inside, can’t enter to DVD/SD/USB mode.
8. “ ” “ ”
In DVD mode, short-press for previous/next item, long-press for fast forward/fast back;
In FM mode, short-press for adjust radio frequency, long-press for manual search forward
up/down; In TV mode, short-press for previous / next channel, long-press for fine-tuned.
2626
78
9. ODD:
Press the OSD remote control key, the screen will display elapsed time, remaining time,
title,chapter, time, section time, time remaining chapters, show off
10.Select the subtitle
11. Press “Sub-T” to select different subtitles inherent in DVD disc.
12. Press ZOOM key for times, the picture will change in order of 1/2,1/4,1/8, and1/16 of normal
size. (Note: When playing MP3/USB/SD, this button is invalid.)
13. Press SLOW on the remote control to slow playing. Change the playing speed to 1/2, 1/4,
1/8, and 1/16 through pressing SLOW button.
14.During playback press the "AUDIO" voice key, can be included on the DVD disc in a variety
of audio languages to choose.
15. “GOTO” chooses play button, Press it, the play information will show on screen, use cursor
button on the remote control to choose disctitle, chapter or time and then press “enter” button
to play.
16. Press ANGLE to select the play angle when the main unit is in play mode for DVD disc,
there is no function for other disc. It will be no working if the disc not have this function.
17. Press ZOOM key for times, the picture will change in order of 2X, 3X and 4X of normal
size. (Note: When playing MP3/USB/SD, this button is invalid.)
18. The main unit may auto play the list according to the order of title, chapter or set list;
Press ST/PROG, the menu will shown on the screen.
Hint: TT is for Title, CH is for Chapter of DVD disc. DVD disc
is divided into several parts called Title. Then title is divided
into chapter; Normally one movie only corresponding to one
title. CD disc is divided into several items. For KARAOKE disc
one music corresponding to one title.
Use the and number button, to input the corresponding title, chapter, same as
the picture showing:
Use move cursors to “play”, press “enter” button,
the unit starts playing on the program list. Press “Play/Pause”
button or choose "Exit" button, press “enter” to exit.
NOTE:
(1). The program list will be cancel when the main unit is power off or eject the disc.
(2). There is no program function for some disc.
(3). The unit can not play the list if you select the item that does not exist in the disc.
1
2
3
4
5
11
12
13
14
15
Prev ious
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
TT: CH:
6
7
TT: CH:
8
TT: CH:
9
TT: CH:
10
TT: CH:
EXIT
EXIT
Next
TT: CH:
16
17
TT: CH:
18
TT: CH:
19
TT: CH:
20
TT: CH:
Touc h Scr een Menu And Opera tio n
Main Interface
Once opening the unit, it can automatically enter into the main interface, As shown
4
3
2
1
B: B function.
1. TPHONE luetooth
2. DVD mode
3. TV function mode.(Invalid Function keys)
4. RADIO: radio mode
5/7. USB/SD: Memory signal input mode,
(Connect the usb/sd can be to enter)
6.POWER: Off key
8.Close the screen display, and then click on
the scree nback to normal.
9/11. /
6
57
8
11
9
10
13
12
Adjust panel angle upward/down
AUX AUX
10. : signal input mode.
.
12 : press this button can slip in/out disc
13. SETUP: setup menu.
Touch screen “1,2,4,5,7,10,13” the center of the corresponding function, the screen immediately
enter to interface of your chosen functions mode. If have connected signal source, there are
clear picture for you to enjoy. Touch the screen "6" off; touch "13" point can enter the setup menu
to set product function and display; specific instructions, please refer to the corresponding menu
interface. Touch screen "9,11" points to adjust the panel angle up or down to meet your visual
requirements.
Touch c orrespondi ng center icon o n the scr een, th en can en ter int o the int erfac e what
fun ction y ou choo se
Bluetooth system sett ing s
Pre ss the re mote co ntrol " mode" , selec t displ ay pict ure, or i con on th e touch s creen t o
ent er the BT B luetoot h mode: s ee the pi cture b elow.
1
4
5
6
1. Back to the main interface.
Status Information shows column.2.
3
2
Delete button: touch the button can
3.
delete the already input number.
Dialing button: answer and make the
4.
phone.
Press the call state, phone call mode
5.
8
conversion mode with the external call
6
Hang up button: end the call or refuse the
.
call.
Number buttons
7
7.
8
.When play songs by bluetooth, they act
as respectively pause/play, previous song,
stop playing and next song
910
Operating instructions
1. Starting up and enter into the bluetooth system picture.
2. Open up the bluetooth equipment of the mobile phone can search this unit's bluetooth
equipment “CAR KIT”.Then match the bluetooth by presentation.
3. Input 4 figures pass code“0000”,this unit's bluetooth will be set up to the authorized
equipment of the mobile phone. If the match is successful the status of the bluetooth
picture will show “LINK OK”
Tips: If it unable to match please starting up again. After setting up the unit to authorized
equipment, the bluetooth will connect or enter into mobile phone bluetooth system
automatically. Select “CAT KIT”to connect it.
4. After you match successfully you can make and answer the ph one comfortably.
Within the effective limits, this unit can also transmit the music which is playing in the
mobile phone. And can adjust the voice through mobile phone.
(Within the effective limits of 10 meters).
Cautions: This unit can only match with one mobile phone equipment which has bluetooth
function. The bluetooth function of this unit can only receive audio frequency information.
DVD Mode Menu Interface
Panel or by remote control "MODE" ; Or on main menu to touch MEDIA icon enter to DVD
mode(touch screen the menu toolbar appears when the menu toolbar Hide):
Back to the main interface
1.
2/3.VOL-/VOL+:
4/6. /
5/7: /
8. :
9. :
Volume control button
previous /Next
:
Fast forward / Fast back
:
Stop
Play/Pause
10.MUTE
AUDIO: n DVD playback, press
11.I
this button, Press it to select the
channel when the main unit is in play
mode for DVD disc
12.RPT
13.TITLE
14.MENU
15.SUB:Subtitle selection(need the disc support)
Tools, Touch it enter to AUDIO/VIDEO menu Please refer to audio / video menu
16.SET:(
description
)
17. :
Disc out of the warehouse
Not e:
In an y mode, o nce pla ced the D VD disc , it will a utoma tical ly swit ch back t o DVD mod e.
1
5
4
3
2
12
111013
16
14
15
17
9
8
7
6
USB/SDOperation
When the unit connect USB/SD, touch the “USB” or “SD” icon in main interface, will auto
read .As shown:
Close the screen display, and then click
1.
on the screenback to normal.
2 3 Volume control button
/ .
.PRT
4
/ . / Previous/Next
5 6
. Play/Pause
7
. Stop
8
When playing USB or SD card, Touch the DVD menu arrow keys to move the cursor to the file
bag, file, MP3 or JPEG icon icon you want, and then press to confirm the selection, the selected
file will automatically play . Play JPEG photo files, touch to confirm the current picture to exit
picture playback, press the stop button to exit.
While the USB/SD is playing, and if you Insert the disc, will go to DVD playing. Pull out
the USB/SD when you want to stop playing. Click the file directly can play the selected file.
Note: Click the bottom half of the screen can appear "Actions" menu, then click the "
disappeared.
00:12 0 2:27
002/0 13
MP3
Mp3
Mp3
Mp3
1
RPT.
6
5
4
2
3
8
7
Radio Function Interf ace
After opening the machine, Select main screen or select on the remote control "mode" to
switch to the RADIO,As shown:
9
8
9/10.Receiving frequency tuning
11. Status Information shows column.
12.FM/AM band shows
11
1.
Close the screen display, and then click on
the screenback to normal.
Touch MUTE to turn off the sound,
2
87. 75
87. 75
89. 45
88. 65
91. 15
Mhz
Fm1
89. 00
92. 35
. MUTE:
10
press again to resume to previous volume
level.
3/4. Volume adjustment buttons
5. SCAN: Touch "Scan" Department, will
3
4
5
6
1
2
7
8
automatically search for and select "SGAN"
will automatically save
6. BAND: Select FM/AM wave band.。
Click the Search radio channel up / down
7/8.
Audio/Video Menu Setup
Under DVD mode, touch “SET” button enter to “AUDIO/VIDEO”menu setting interface.
(Picture 1) Audio setting interface
3
4
5
6
2
1
8
9
7
AUDIO mode: Touch this icon, the icon is
1.
10
concave, then will enter to audio setting mode.
VIDEO mode: Touch this icon, the icon is
2.
concave, then will enter to video setting
mode.
TRE: Alt volume adjustment, Touch the
3.
“ ” “ ” icon, on the screen, the alt
volume will change.
BAS: Bourdon volume adjust.
4. BAS:
Touch the “ ” “ ” icon on the screen, the
bourdon volume will change.
FAD: Front and Rear volume adjustment,
5.
Touch the “ ” “ ” icon on the screen, the
front and Rear volume will change.
BAL: Left and right track adjustment,
6.
Touch the “ ” “ ” icon on the screen, the
left right track volume will change.
7.CLASS
8.ROCK
(Picture 2) Video setting interface
11
12
13
14
15
18
17
16
9.JAZZ
10.POP
BRI: Brightness
11.
Touch the“ ” “ ” icon on the screen,
to adjust the picture brightness.
CON: Contrast,
12.
Touch the“ ” “ ” icon on the screen,
to adjust the picture contrast.
13.COL: Color,
Touch the “ ” “” icon on the screen,
to adjust the picture color.
HUE: Hue,
14.
Touch the “ ” “ ” icon on the screen,
to adjust the picture hue.
STDY: Standard mode.
15.
BRIG: Brightness.
16.
SOFT: Soft.
17.
18.VIVID
11
12
SYS System Settings
After opening the machine, Under the main menu screen on the touch screen "SYS" key to enter
"SYS" system setting interface,Interface shows 、、Touch prospective
effect、,As shown:
Language settings
pro mpt Set t he audi o / video a nd DVD me nu when a udi o video mod e opera tion th e same:/
Ste ering o perat e
AUDIO/VIDEO Steering
12
11
10
Whe n the use r want to r e-set s teeri ng
whe el keys f or shor t-cut p urpos e, firs tly,
pre ss the “D elete ” key to de lete th e
pre vious ly set be fore re -desi gnate
fun ction s on stee ring wh eel, Se condl y,
lon g-pre ss he but tons of t he car' s steer ing
whe el and ho ld down t he “fun ction “ keys
on ca r, and the n click ” learn ” butto n on the
ste ering w heel of t he unit . Third ly, select t he appropria te func tion yo u like, t he stat us bar
on th e unit wi ll disp lay the c orres pondi ng info rmati on, Fou rthly, c lick the “save “ button
on th e scree n of the un it.Wh en exis t, you ca n achie ve the pu rpose f or sett ing the s teeri ng
whe el func tions .
Pre vious s ong/N ext son g
1
.
.
Volu me adju stmen t butto ns
2/3
Dia ling bu tton: a nswer a nd make t he
4.
pho ne.
Han g up butt on: end t he call o r refus e
5.
the c all.
6.CANC EL
7.MODE
Not e All key s in the st eerin g wheel a re inva lid if no t in the le arnin g setti ng mode .:
Touc h-efficien cy adjustmen t
Touch -effi ciency adjus tment (follo w the pro mpts to c lick on t he cent er of "+" s ign, if
suc cessf ully ad just, i t will au to-ex it)
Lan guage s ettin gs
1.2Bac k to the ma in inte rface
.Engli sh / Port ugues e
1
5
3
2
4
9
7
6
8.MUTE
9.SAVE
10. STU DY
11.P OWE R
12. S tatus I nform ation s hows
col umn.
1
2
13
DVD System Settings
, P
Under the DVD display mode, press the “SETUP”button on remote control ress ""
to move the cursor and "ENTER"Confirmation option ConductAudio
、VideoSetup Pageand Preference Page。below is for the details menu for
Setup Psage
General Setup Page、
your reference
1. General Setup Page
8
Gene ral Ser up Page
Tv Dis play Wi de 4:3 Pa nscan
Angl e Mark Off
Osd La ng En g
Capt ions Off
Scre en Save r Off
Last M emory
Set Tv Di splay M ode
Gene ral Ser up Page
Tv Dis play Wi de
Angl e Mark Of f
Osd La ng Eng
Capt ions Off
Scre en Save r Off
Last M emory
Clos ed Capt ion
4:3 Le tterb ox16:9
Off
Off
On
Off
-- General Setup Page - -
Tv Dis play
PS
Off
Angl e Mark
Eng
Osd La ng
Off
Capt ions
Scre en Save r
Off
Last M emory
Off
Go To Gene ral Set up Page
Gene ral Ser up Page
Tv Dis play Wi de
Angl e Mark Of f On
Osd La ng Eng
Capt ions Off
Scre en Save r Off
Last M emory
Off
Set Ang le Mark
Gene ral Ser up Page
Tv Dis play Wi de
Angl e Mark Of f
Osd La ng Eng
Capt ions Off
Scre en Save r Off
Last M emory
Off
Scre en Save r
Gene ral Ser up Page
Tv Dis play W ide
Angl e Mark Off
Off
On
Off
Osd La ng Eng
Capt ions Off
Scre en Save r Off
Last M emory
Set Os d Langu age
Go To Gene ral Set up Page
Gene ral Ser up Page
Tv Dis play Wi de
Angl e Mark Of f
Osd La ng Eng
Capt ions Off
Scre en Save r Off
Last M emory
Set La st Memo ru Stat e
Engl ish
Chin ese
Fren ch
Germ an
Ital ian
Port ugues e
Off
Spen ish
On
Off
Off
2.Audio Setup Psage
-- AudioSetupPage - -
Anal og Audi o Setup
Goto S peake r Setup P age
In th e Audio se tup menu,it ha s submenu choi ce-“lt/Rt” “Stereo”tw o submenu choi ces.
3.Setup Psage Video
-- VideoSetupPage - -
Pane l Quali ty
Go To Video P anel Qu ality S etup Pa ge
In the video settings menu,The quality of the LCD screen to set a plan“Sharpness”“
Brightness”“Contrast”“Hue”“Saturation”Sub-menu to choose from,Press the
remote control arrow keys on the LCD screen can be set to adjust picture quality
14
4. Preference Page
Preference Page
Tv Type PAL PA L
Audi o Eng
Subt itle
Disc M enu Eng
Pare ntal
Pass word
Defa ult
Set Tv St andar d
Preference Page
Tv Type PAL
Audi o Eng
Subt itle
Disc M enu Eng
Pare ntal
Pass word
Defa ult
Pref erred M enu Lan guage
ATUO
NTSC
Engl ish
Fren ch
Spen ish
Chin ese
Japa nese
Kore an
Russ ian
Function Index Sign
FM
TV
AUD IO
VID EO
-- Preference Page- -
Tv Type
PAL
Eng
Audi o
Subt itle
Eng
Disc M enu
Pare ntal
Off
Pass word
Off
Defa ult
Set Tv S tanda rd
Preference Page
Tv Type PAL
Audi o Eng
Subt itle
Disc M enu Eng
Pare ntal
Pass word
Defa ult
Pref erred A udio La nguag e
Preference Page
Tv Type PAL
Audi o Eng
Subt itle
Disc M enu Eng
Pare ntal
Pass word
Defa ult
Pref erred M enu Lan guage
FM Fr equen cy rang e
Noi se limi t sensi tivit y
S/N R atio
Ant enna re sista nce
VHF -L
VHF -H
UHF
TV Typ e
Ant enna re sista nce
S/N R atio
Max o utput p ower
Vid eo outp ut scop e
Vide o Horiz ontal R esolu tion
Engl ish
Fren ch
Spen ish
Chin ese
Japa nese
Kore an
Russ ian
1 Kid Sa fe
2 G
3 Pg
4 Pg 13
5 Pgr
6 R
7 Nc 17
Preference Page
Tv Type PAL
Subt itle
Disc M enu Eng
Pare ntal
Pass word
Defa ult
Set Pr efere nce To Engl ish
87. 5~108 .0MHZ
15d Bu
50d Bu
75Ω
49. 25~85 .25MH Z
168 .25~2 16.25 MHZ
417 .25~8 63.25 MHZ
PAL B/G , I/I, D/ K NTSC
75Ω
80d Bu
25W *4CH
1+ /- 0.2V
≥600
Audi o Eng
Engl ish
Fren ch
Spen ish
Chin ese
Japa nese
Kore an
Russ ian
Warning
1. To ensure the accurate of touch function, please touch the center point of relative function.
2. There are build in anti-jamming system in touch screen, to prevent the wrong position touch, please
keep to touch this function for 0.5 second, then the product will get respond for your instruction.
3. Please do not use the object, which is bigger than the function icon to touch the screen. Otherwise
the touch function will failure or give the wrong operation to other function.
4. To ensure the panel safety, please don't press or use the sharp object to touch the panel.
5. Don't play the severity scratch disc, otherwise will damage the DVD play capability.
6. Be sure to distinguish the anode and the cathode when connecting the power. If connect wrong, the
fuse in filter box will melt immediately to protect unit. Then please replace the same parameter fuse.
7. DC 12V should be best to connect with the power adapter to prevent from the over-voltage drop the
may influence the normal work of the monitor.
8. Keep this machine away from too hot, or under effect of moisture, dust or oil smoke, avoid this
machine from dropping or impacting, never extrude or chafe this machine with sharp objects.
9. Dangerous high voltages are present inside the enclosure. Do not open the cabinet, non professionals can not disassemble unit.
10. Installation should be very tight and secure. Preventing the fallen unit hurt people when moving on
or a sudden brake.
Trouble Shooting
PROBLEM
Cannot power on
After ignition switch off,
setting information all lose
Remote control no function
Poor performance of radio
station
Cannot play disk
Cannot switch language/
subtitle
No image
CAUSE
Check whether power fuse melt or not
Some factor cause MCU wrong operation
Wrong connection between ignition line
ACC and power line anode pole
No enough power supply from battery
Improper set of length of antenna, poor
connection of antenna grounding
Disk is scratched.
Put wrong side of disk into unit.
Disk has dirty.
There is only one language/subtitle in
dish
Video line between unit and TV is not
properly connected.
Change fuse same as the old one.
Press RES button on the panel by
penpoint, then power on
Reconnect line
Change battery of remote control
Check whether antenna is connected
or not, or poor connection.
Change new disk
Slot in the disk with sign side up
Clean disk
If disk is not with multi-language/subtitle,
it cannot switch language/subtitle
Reconnect lines
SOLUTION
15
16
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.