Tutti Bambini ISOFix Assembly Instructions Manual

ISOFix

Child Restraint System

Assembly Instructions

Hello,

Congratulations on your new arrival!

We’re so pleased that you have chosen our ISOFix Base to use in

conjunction with your ByGo

®

Car Seat.

Please take a few moments to read this guide on how to safely install this

ISOFix Base correctly onto the ISOfix fitting points in your car.

Wishing you the best of luck on your new journey.

The Tutti Bambini ISOFix base is designed to stay in your car, where it attaches

to the ISOFix fitting points. Having this base fitted in your car then allows your

ByGo

®

car seat to simply click onto the base ensuring that your little one is safe

and secure in their car seat.

Features:

• Simple ‘Click & Go’ Installation

• Uses ISOfix attachment points to install in car

• Indicators confirm correct installation

• Floor support provides extra safety in the event of frontal impact

• Best for use with the Tutti Bambini ByGo

®

Group 0+ Car Seat

Tutti Frutti Direct Ltd. Unit 3, 1000 North Circular Road, London, UK, NW2 7JP

t: [phone]

e: [e-mail]

www.tuttibambini.com

IMPORTANT: RETAIN FOR FUTURE REFERENCE. READ CAREFULLY

NOTICE

1. This is an ISOFIX CHILD RESTRAINT SYSTEM.

It is approved to Regulation no.44,04 series of amendments for general use in vehicles

fitted with ISOFIX anchorages systems. It will fit vehicles with positions approved as

ISOFIX positions(as detailed in the vehicle handbook),depending on the category of the child

seat and of the fixture. The mass group and the ISOFIX size class for which this device is

intended is :CLASS D, This seat can be used for children of 0-13kg in weight.

This child restraint is classified for “Semi-universal” use and is

suitable for fixing into the seat positions of the following cars:

1.PLEASE READ THOROUGHLY BEFORE COMMENCING INSTALLATION AS AN INCORRECT

INSTALLATION COULD BE DANGEROUS. 2. PARENTS SHOULD NOT UNDER ANY CIRCUMSTANCES

USE THIS CHILDRESTRAINT ON A PASSENGER SEAT EQUIPPED WITH AN AIRBAG.

3. The child seat must only be installed in the rearward facing position. 4. Never use the child seat

without fastening the child’s correctly, and never attempt to use it without fastening it into the car as

described in these fitting instructions, if the shoulder height is not ok, Please re-install the seat again.

5. It is most important that the seat belt is correctly routed and the child seat tightened down on the

upholstery as firmly as possible to ensure maximum protection a recommended method is shown in

these instructions. 6.Do not add or modify this product in any way. 7. Never use this product if it has

been in an accident, or if it has become badly worn. Periodically inspect the bulck for wear, paying

particular attention to attachment points, stitching and adjusting devices. 8. Do not leave a child in the

seat unattended at any time. 9. Ensure that no part of the seat or seat belt is trapped in a door or a

folding seat. If your car has a folding rear seat, ensure that it is correctly latched in its upright position.

10. Car interiors can become very hot when left standing in direct sunlight it is therefore recommended
that the child seat, when not in use, is covered by a towel etc. This prevents components, particularly

those attached to the child seat, becoming hot and burning the child. 11. In the event of an emergency

it is important that the child can be released quickly. This means that the buckle is not fully

tamperproof and therefore your child should be persuaded never to play with the buckle. 12. Luggage

and other heavy objects should be secured in the car. Loose objects are liable to cause injury in

the event of an accident. 13. The child seat must not be used without the cover. 14. Never place your

child seat on a table or work surface. 15. This seat can be used for children of 0-13kg in weight and
is used in conjunction with a 3-point lap and diagonal safety belt in the rear-facing position only. 16.

When the child seat is not in use, it is recommended that it is fastened into the car with a seat belt to

avoid cause injury in the event of an accident. 17. In an emergency your child can be released quickly

by pressing the red button on the buckle. 18. Store this child seat in a safe place when it is not being

used. Avoid placing heavy objects on top of it. 19. If you travel with passengers using both the front and

rear passenger seats, the lighter occupants should be in the rear and the heavier occupants in the

front of the vehicle. 20. Do not allow your child seat to come into contact with corrosive substances e.g.

battery acid. 21. Do not leave the child seat with a child in it on a raised surface, such as a table work

top, bed or shopping trolley, due to the risk of falling. 22. The manufacturer can only gurantee the safety

of the

seat if it is used by the original owner. 23. We strongly advise against using a second-hand product, as

you can never be sure of its history. 24. Always check to make sure the seat fits in your car

properly before purchasing it.

Team Tutti

ISOFIX CLASS D

Contents

Vehicle usage 5
Parts and fittings 6
Fitting the ISOFix base 7
ISOFix child restraint system 11
Installation 12
Loosening the shoulder straps 13
The harness 14
Correct shoulder height 16
Removing the ISOFix base 18
Care and maintenance 20
Notes 21

4 5

www.tuttibambini.com www.tuttibambini.com

Vehicle usage

WARNING

In an accident, enormous forces occur. Never try to secure a
child on your lap with the vehicle seat belt or by holding onto
them. Secure your child in the car seat for every journey!
Always secure the baby seat onto the vehicle seat
in a rearward-facing position.

WARNING

An airbag hitting the baby seat can cause serious injuries to
your child, possibly resulting in death.

WARNING

An airbag hitting the baby seat can cause serious injuries to
your child, possibly resulting in death.

Fitting the ISOFix base

6 7

www.tuttibambini.com www.tuttibambini.com

Parts and fittings

1. Fitting the base into a car which
has ISOFix System

Installed on seats fitted with ISOFix anchor points
(located between seat and seat back) & with
leg room.

+

ISOFix installation markings should be green

Only install into seats with side air bags as appose
to front air bags

3

3

3

7

1. ISOFix system

2. Connectors

3. Red plastic protectors
for ISOFix system

4. Support leg

5. Button

6. Red button

7. Red lever

3

5

4

6

7

2

1