Tuscany TGR38, TGR30 Use And Care Manual
Professional Stainless Steel Grill:
30”& 38” Models
USE AND CARE MANUAL
FOR OUTDOOR USE ONLY
MADE IN THE USA
TuscanyTM
“Value at its Finest”
38” Grill (TGR38 shown with optional equipment)
4/2002
A Message to our Customers
Congratulations and thank you for your purchase of the Tuscany Gas Grill. Your grill has been
designed to provide the very best in outdoor cooking enjoyment. We believe it is the finest grill
on the market. For your safety please read all the assembly instructions and care and use
directions before operating the appliance.
Tuscany Gas Grills have all the features consumers are asking for, such as 304 stainless steel
construction, electronic ignitors, convection cooking vents, optional side burners or infrared
back burners.
Sure Heat Manufacturing is very committed to customer satisfaction and excellence. Our ultimate goal is for our customers to enjoy our products for a lifetime.
Sincerely,
Mike Mulberry
President
Sure Heat Manufacturing
3130 Moon Station Road
Kennesaw, GA 30144
800-229-5647
TABLE OF CONTENTS
Please retain this manual for future reference
GENERAL SAFETY INSTRUCTIONS.............................................................2
GRILL FEATURES..............................................................................................3
GRILL COMPONENTS LIST............................................................................4
INSTALLATION / ASSEMBLY..........................................................................5--8
BUILT-IN INSTALLATION................................................................................9-11
GAS REQUIREMENTS.....................................................................................12-13
LEAK TESTING.................................................................................................14
USING THE GRILL...........................................................................................15-17
Lighting the Grill...................................................................................16
Rotisserie Usage.....................................................................................17-18
CARE & MAINTENANCE................................................................................19
TROUBLE SHOOTING.....................................................................................20-21
WARRANTY.........................................................................................................22
Please record Grill information for future reference and service work:
Model #:
Serial #:
Date of Purchase:
Gas Type:
GENERAL SAFETY INSTRUCTIONS
IMPORTANT SAFETY INFORMATION
- Read this manual carefully before using your grill to reduce the risk of fire, burn hazard or other injury.
- Extreme care should be used because of the high temperatures produced by this appliance. CHILDREN
SHOULD NOT BE LEFT UNATTENDED IN AN AREA WHERE THE GRILL IS BEING OPERATED.
- This appliance must be kept clear from combustible materials, gasoline or other flammable vapors and liquids. Do not allow flammable materials to come in contact with grate, burner or hot surfaces.
- Do not repair or replace any part of this appliance unless it is specifically recommended in this manual. A
qualified service technician should conduct all other service.
- Follow the installation and servicing instructions provided with this product. Have your grill installed by a
qualified service technician. Locate the main gas supply valve so that you know how to shut the gas off to
your grill. If you smell gas, make sure all gas connections are tight before operation. If you continue to smell
gas call a qualified technician.
- When lighting a burner, always pay close attention to what you are doing. Be certain you are pushing the
ignitor that lights the burner you intend on using.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flames.
3. Open lid.
4. If odor continues, immediately
call your gas supplier.
TESTED IN ACCORDANCE WITH ANSI
Z21.58-1995/CGA 1.6-M95 STANDARD FOR
OUTDOOR COOKING GAS APPLIANCES.
THIS GRILL IS FOR OUTDOOR USE ONLY.
Check your local building codes for the proper
method of installation. In the absence of local
codes, this unit should be installed in accordance
with the National Fuel Gas Code No. Z223.1-1998
and the National Electrical Code ANSI/NFPA No.
70-1990
WARNING
DO NOT try lighting this appliance without reading
the “LIGHTING INSTRUCTIONS” section of this
manual.
FOR YOUR SAFETY
DO NOT store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
This appliance is not intended to be
installed in or on recreational vehicles or boats.
CALIFORNIA PROPOSITION 65 - WARN-
ING: The Burning of gas cooking fuels generates
some by products which are on the list of substances
which are known by the State of California to cause
cancer or reproductive harm. California law requires
businesses to warn customers of potential exposure to
such substances. To minimize exposure to these substances, always operate this unit according to the use
and care manual, ensuring you provide good ventilation
when cooking with gas.
2
GRILL FEATURES: 38” (TGR38)
shown for illustration
3
1. Grilling/Cooking surface 8. Cart door (optional)
2. Infrared back burner (optional) 9. Control knobs: main burners
3. Drip/grease tray 10. Control knob: infrared back burner (optional)
4. Rotisserie motor assembly (optional) 11. Cart (optional)
5. Roll top grill hood 12. Electronic ignitor
6. Handle 13. Side shelf
7. Warming shelf 14. Convection vents
1
5
10
4
3
6
7
2
13
12
14
9
8
11
GRILL COMPONENTS LIST
Car
t Parts
2 L-shaped side pieces
1 U-shaped back side piece
1 Base
2 Wheel channels
Car
t Door P
arts (option)
1 Door with handle
1 Magnetic door catch
1 Nylon bushing
1 Nylon shoulder washer
2Hex head screws
Grill P
arts
1 Stainless steel grill head
1 Stainless steel side shelves
1 Electronic ignitor
13 Piece flavor grid (on 38” models)
11 Piece flavor grid (on 30” models)
3 Stainless steel cooking grates (on 38” models)
2 Stainless steel channel grates (on 30” models)
1 Stainless steel warming rack
1 Stainless steel drip tray
1 Hose and regulator (LP models only)
Assemb
ly Parts
12 Hex head screws
8 Bolts
4
INSTALLATION /
ASSEMBL
Y
5
Car
t Assembly
1. Attach the two L-shaped sides to the Ushaped back portion of the cart, making sure
the four holes face up & the key holes are on
the bottom, using the (8) self taping hex
head screws. (See Fig. 1)
Note: A power screwdriver is required to
install the screws-be cautious not to overtighten and strip the screws.
2. Set the base on the top of the cart assembly,
with large opening closer to back portion of
cart, and align the eight mounting holes. Then
set the 2 wheel channels on the base and
attach them using the (8) bolts provided, from
inside the cart upwards through wheel
channels. (See Fig. 2)
Note:
Tighten the bolts securely & Set Cart Upright
Attaching Grill Head to Cart w/o door
Use the following instructions if attaching Grill to
cart without a door. (if a door is included, skip to
installation instructions on following page)
1. With the grill on its back, loosen all 4 bolts
on the bottom side of the grill. (See Fig. 3)
2. Have someone help you pick up the grill
and set it on the top of the cart, with the back
of the grill above the cart opening. Make
sure the 4 bolt heads fall through the large
opening of the key hole slots in the top of the
cart. Slide the grill head forward so the bolts
are resting in the small opening of the key
hole slots. Tighten the bolts securelybe sure not to over tighten and strip the bolts.
Next insert 4 hex head screws into grill bottom through cart. (See Fig. 4 or 5)
Note: This is a very heavy step that requires
two individuals to complete.
Fig. 2
Fig. 4
Fig. 5
Fig. 3
Note: Prior to assembly remove protective film from stainless steel parts
Fig. 1
Screw holes
Screw holes
Bolts
Screws
Key Holes
30”
Model
38”
Model
Use
front
set of
key
hole
slots
INSTALLATION /
ASSEMBL
Y
Attaching Grill Head to Cart w/door
Use the following instructions if attaching Grill to
cart with a door.
1. With the grill on its back, loosen all 4 bolts
on the bottom side of the grill. (See Fig. 6)
2. Using 2 self taping hex head screws,
attach the magnetic door catch in the 2 holes
in the bottom of the grill. (See Fig. 7)
3. Have someone help you pick up the grill
and set it on the top of the cart, with the front
of the grill above the door opening. Make
sure the 4 bolt heads fall through the large
opening of the key hole slots in the top of the
cart. Slide the grill head backward so the
bolts are resting in the small opening of the
key hole slots. Tighten the bolts securelybe sure not to over tighten and strip the bolts.
Next insert 4 hex head screws into grill bot
tom through cart. (See Fig. 8 or 8a)
Note: This is a very heavy step that requires
two individuals to complete.
6
Screw holes for
magnetic catch
Bolts
Screws under
edge of bracket
Catch faces
towards front
of grill
Screw holes
Screw holes
Fig. 6
Fig. 7
Fig. 8
Fig. 8a
30”
Model
38”
Model
Use
back
set of
key
hole
slots
Loading...