Tuscany Cs892lp Owner's Manual

USE AND CARE MANUAL

For Model CS892LP

Stop! Missing a part? DO NOT RETURN PRODUCT TO STORE

The store where you made the purchase does not stock
parts for this item. If you need parts, whether they are

missing or damaged, please call Customer Service at

Call us between 8:00 AM and 5:00 PM Eastern time, Monday through Friday

or email us at [e-mail]

FOR YOUR SAFETY:

1. Read this Manual before attempting to assemble or operate your grill.

2. Follow saftety instructions.

3. Check for leaks according to the directions in this Manual before operating your grill,
even if purchasing an assembled grill.

4. Keep this Manual for future reference.

5. Contact 1-800-229-5647 should you need assembly assistance or have any questions.

THIS GRILL IS FOR OUTDOOR USE ONLY.

If stored indoors, then detach and leave propane cylinder outside.

1-800-229-5647

General Safety Instructions

IMPORTANT SAFETY INFORMATION

- Read this manual carefully before using your grill to reduce the risk of fire, burn
hazard or other injury.

- Extreme care should be used because of the high temperatures produced by this
appliance. CHILDREN SHOULD NOT BE LEFT UNATTENDED IN AN AREA
WHERE THE GRILL IS BEING OPERATED.

- This appliance must be kept clear from combustible materials, gasoline or other flammable vapors and liquids. Do not allow
fl ammable materials to come in contact with grate, burner or hot surfaces.

- Use only outdoors and provide good ventilation to avoid carbon monoxide build-up which could result in injury or death.

- Do not repair or replace any part of this appliance unless it is specifi cally recommended in this manual. A qualifi ed service technician
should conduct all other service.

- Follow the installation and servicing instructions provided with this product. Have your grill installed by a qualifi ed service technician.

- Locate the main gas supply valve so that you know how to shut the gas off to your grill.

- If you smell gas, make sure all gas connections are tight before operation. If you continue to smell gas call a qualifi ed technician.

- When lighting a burner, always pay close attention to what you are doing and be certain you are pushing the igniter that lights the
burner you intend on using.

- Always keep your face and body as far away from the grill as possible when lighting to reduce the risk of burn.

- Extinguish all fl ames and do not smoke while engaging gas and igniting the grill.

- A minimum distance of at least 24" must be maintained from any combustible material on both sides and the back of the grill. Do not
place the grill under any overhead unprotected combustible construction.

RECOGNIZE SAFETY SYMBOLS, WORDS AND LABELS

WARNING

!

▲

DANGER

!

▲

DANGER

▲!

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open fl ame.

3. Open lid.

4. If odor continues, keep away from the
appliance and immediately call your gas
supplier or your fi re department.

WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.

NOTE indicates an important piece of information that needs to be
observed to ensure the proper operation of your grill.

WARNING

▲!

1. Do not store or use gasoline or other
flammable liquids or vapors in the
vicinity of this or any other appliance.

2. An LP cylinder not connected for use
shall not be stored in the vicinity of this
or any other appliance.

INSTALLER: Please retain these instructions with the owner so that they may maintain them for

future reference.

2

General Safety Instructions

!

WARNING

▲

Do not use the rotisserie in the rain.

!

WARNING

▲

Keep any electrical supply cords and the fuel

supply hose away from any heated surfaces.

!

WARNING

▲

The Spare L.P. Gas Tank Barrier must be installed
to prevent storage of spare L.P. Gas Tanks. Failure
to comply with these instructions could result in
a fi re or explosion that could cause serious bodily

injury, death, or property damage.

!

WARNING

▲

Always have a qualifi ed service technician perform

diffi cult conversions or modifi cations.

!

WARNING

▲

NOTE: Do Not operate the main burners and
infrared back burner at the same time. This can

cause warping of the roll top grill hood.

!

WARNING

▲

Do not use the grill in garages, breezeways, sheds
or any enclosed area. Never operate the grill
in enclosed areas as this could lead to a carbon
monoxide buildup, which could result in injury
or death. Place the grill on a level surface. Avoid

moving the grill while it is in operation.

!

WARNING

▲

Never attach an unregulated gas line to the
appliance. Connection to an unregulated gas line

can cause excessive heat or fi re.

FOR YOUR SAFETY

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open fl ames.

3. Open grill hood.

4. If odor continues, immediately call your
gas supplier and local Fire Dept.

!

WARNING

▲

CALIFORNIA PROPOSITION 65 -WARNING:
The burning of gas cooking fuels generates some
by-products which are on the list of substances
that are known by the State of California to
cause cancer or reproductive harm. California
law requires businesses to warn customers of
potential exposure to such substances. To minimize
exposure to these substances, always operate this
unit according to the use and care manual, provide

good ventilation when cooking with gas.

!

WARNING

▲

This appliance is not intended to be installed in or

on recreational vehicles or boats.

TESTED IN ACCORDANCE WITH ANSI
Z21.58b-2006/CSA 1.6b-2006 STANDARD FOR
OUTDOOR COOKING GAS APPLIANCES.
THIS GRILL IS FOR OUTDOOR USE ONLY.

Installation must conform with local codes, this
unit should be installed in accordance with the
National Fuel Gas Code No. Z223.1/NFPA 54,
National Gas and Propane Installation
Code, CSA B149.1 or Propane Storage and

Handling Code, B149.2

FOR YOUR SAFETY

DO NOT store or use gasoline or other fl ammable

vapors and liquids in the vicinity of this or any
other appliance.

An LP cylinder not connected for use shall not be
stored in the vicinity of this or any other appliance.

!

WARNING

▲

DO NOT try lighting this appliance without
reading the “ LIGHTING INSTRUCTIONS”

section of this manual.

FOR OUTDOOR USE ONLY

3

Grill Features

1

2

3

4

5

6

7

8

9

10

11

12

13

14

1. Roll top grill hood

2. Bread warming rack

3. Grilling/cooking surface

4. Side shelf

5. Left cart

6. Control knobs: Main burners

7. Hood Handle

8. Side burner

9. Towel bar

10. Control Knob: Side burner

11. Electronic igniter: main burners, side
burner and bottom IR burner

12. Right cart

13. Cart doors

14. Serving cart

4

Getting Started

10 - Self-tapping screws

8 - Phillis sunk screws M4 x 10

26 - Phillips head screws M5 x 12

Getting Started

1. Please follow the steps in the order that they are presented.

2. Assemble the grill where you plan to use it.

3. You may want to place an old towel or cloth at the assembly site to prevent nuts and bolts from
becoming lost.

4. Have a friend help. An assistant can make the assembly easier by holding the parts in place
while you fasten the nuts and bolts.

5. To be ready to barbecue immediately, have the L.P. gas cylinder fi lled by an authorized L.P.
dealer or cylinder exchange center.

Unpacking the Grill Parts

1. Remove and set aside all inner boxes and parts from the master carton.

2. Remove and set aside all wrapping paper and additional packaging from the parts.

3. Do not destroy carton or packing until your grill is completely assembled and operating to your
satisfaction.

Tools needed to assemble grill:

Phillips screwdriver
Adjustable wrench
1/2” wrench or socket
1/4” nut driver or socket

TOOLS NOT INCLUDED

WARNING

▲!

Failure to follow all Danger, Warnings,
and For Your Safety notices in this
Grill Guide may result in serious bodily
injury, death, in a fire or an explosion
causing damage to property.

Perform a Gas Leak Test
explained later in this Grill
Guide before operating
your grill.

▲!

DANGER

5

Grill Assembly

LEFT SHELF ASSEMBLY

1. Loosen the four M5 x 12 Phillips head screws on
the middle of the grill cart left by approximately
1/4". Attach the grill cover shelf by inserting the four
bolt heads into the holes on the grill cover shelf.
Tighten the four screws to secure the shelf.

(See Fig. 1)

2. Use two M6 x 10 Phillips head screws to secure
the towel bar to the left shelf. (See Fig. 2)

3. Use four M5 x 12 Phillips head screws and four
self-tapping screws to attach the cart left.

(See Fig. 3)

Fig. 1

Fig. 2

Fig. 3

Phillips head

screws

Phillips head

screws

Self-tapping

screws

4. Attach the cart left to the left shelf with four M5 x 12
Phillips head screws. (See Fig. 4)

5. Loosen the bolts and slide the left cart assembly in
position. Then secure the four bolts. Secure the left
cart assembly to the cart assembly with seven M5
x 12 Phillips head screws. (See Fig. 5)

Fig. 4

Phillips head

Fig. 5

Phillips head

screws

Phillips head

screws

Bolts

screws

Bolts

6

Grill Assembly

SIDE BURNER PARTS ASSEMBLY

6. Loosen the four M6 x 12 Phillips head screws on
the bottom of the grill cart right by approximately
1/4". Attach the tank tray by inserting the four bolt
heads into the holes on the tank tray. Tighten the
four screws to secure the tank tray. (See Fig. 6)

7. Use two M6 x 10 Phillips head screws to secure the
towel bar to the side burner assembly. (See Fig. 7)

Fig. 6

Fig. 7

Phillips head

screws

Phillips head

screws

8. Use six self-tapping screws to attach the cart right.
(See Fig. 8)

9. Attach the cart right to the side burner assembly
with four M5 x 12 Phillips head screws. (See Fig. 9)

10. Loosen the bolts and slide the right cart assembly
in position. Then secure the four bolts.Secure the
right cart assembly to the cart assembly with seven
M5 x 12 Phillips head screws. (See Fig. 10)

Fig. 8

Self-tapping

screws

Fig. 9

Phillips head

screws

Fig. 10

Bolts

7

Phillips head

screws

Grill Assembly

SIDE BURNER PARTS ASSEMBLY

11. Remove the two M5 x 8 Phillips head screws from
the orifi ce bracket. Align the orifi ce into the center
of the side burner bracket. (See Fig. 11)

12. Use the two screws removed in step 11 to secure
the orifi ce backet on the side burner tray.

(See Fig. 12)

Note: Add lock washer when installing the screws in

position.

13. Slide the side burner valve stem through the
center hole in the front of the shelf. Insert one valve
screw through the bezel and in to the side burner
valve and tighten. Next, install the second valve
screw through the bezel and tighten. Make sure the
bezel is installed with the OFF position facing up.
Install control knob, making sure to line up the fl at
side of the valve stem with the fl at side of the knob
stem. Unscrew the igniter push button from the
igniter module, install the "AA" battery with positive
end (-) facing out. Screw the push button back onto
the igniter. (See Fig. 13)

Fig. 11

Fig. 9

Bolts

Orifi ce

Fig. 12

Fig. 10

Screws

Screws

Orifi ce bracket underneath the side burner tay

Fig. 13

Fig. 11

Igniter

Side burner bracket

Orifi ce bracket

Holes

side burner bracket

Side burner valve

"OFF" on the bezel

vavle stem

Fig. 14

14. Attach the igniter wires to the igniter terminals.

(See Fig. 14)

Note: It does not matter which wire goes to which

terminal on the igniter module.

15. Place the side burner grate in position.

(See Fig. 15)

Note: Remove all the tape before using the grill.

8

Igniter wires

Fig. 15

Side burner

grate