Turo Light VIV-T8BPSP4/9W/50/F, VIV-T8BPSP4/9W/30/F, VIV-T8BPSP4/12W/35/F, VIV-T8BPSP4/12W/40/F, VIV-T8BPSP4/12W/50/F Installation Manual

Installation Guide

VIVID™ T8 LED ByPass Shatterproof 4 Tube (BPSP4)

Please read this installation manual carefully, it contains
important information and notes regarding the installation and
operation of VIVID T8 LED ByPass Tube (BPSP4).

Applicable to the following models

Order

Code

1762771

1762356

1762853

1762534

1762296

1762311

1762484

1762514

1762746

1762342

1762833

1762527

1763231

1763313

1763432

1763512

Model

Number

VIV-T8BPSP4/9W/30/F

VIV-T8BPSP4/9W/35/F

VIV-T8BPSP4/9W/40/F

VIV-T8BPSP4/9W/50/F

VIV-T8BPSP4/12W/30/F

VIV-T8BPSP4/12W/35/F

VIV-T8BPSP4/12W/40/F

VIV-T8BPSP4/12W/50/F

VIV-T8BPSP4/12.5W/30/F

VIV-T8BPSP4/12.5W/35/F

VIV-T8BPSP4/12.5W/40/F

VIV-T8BPSP4/12.5W/50/F

VIV-T8BPSP4/14.5W/30/F

VIV-T8BPSP4/14.5W/35/F

VIV-T8BPSP4/14.5W/40/F

VIV-T8BPSP4/14.5W/50/F

Discription

T8 Bypass 2ft 9W G13 30K Frost Shatterproof DLC4.0

T8 Bypass 2ft 9W G13 35K Frost Shatterproof DLC4.0

T8 Bypass 2ft 9W G13 40K Frost Shatterproof DLC4.0

T8 Bypass 2ft 9W G13 50K Frost Shatterproof DLC4.0

T8 Bypass 3ft 12W G13 30K Frost Shatterproof

T8 Bypass 3ft 12W G13 35K Frost Shatterproof

T8 Bypass 3ft 12W G13 40K Frost Shatterproof

T8 Bypass 3ft 12W G13 50K Frost Shatterproof

T8 Bypass 4ft 12.5W G13 30K Frost Shatterproof DLC4.0

T8 Bypass 4ft 12.5W G13 35K Frost Shatterproof DLC4.0

T8 Bypass 4ft 12.5W G13 40K Frost Shatterproof DLC4.0

T8 Bypass 4ft 12.5W G13 50K Frost Shatterproof DLC4.0

T8 Bypass 4ft 14.5W G13 30K Frost Shatterproof DLC4.0

T8 Bypass 4ft 14.5W G13 35K Frost Shatterproof DLC4.0

T8 Bypass 4ft 14.5W G13 40K Frost Shatterproof DLC4.0

T8 Bypass 4ft 14.5W G13 50K Frost Shatterproof DLC4.0

Tube

Size

24”

24”

24”

24”

36”

36”

36”

36”

48”

48”

48”

48”

48”

48”

48”

48”

WARNING

• Risk of re or electric shock. LED Retrot Kit installation requires knowledge of luminaires

electrical systems. If not qualied, do not attempt installation. Contact a qualied electrician.

• Risk of re or electric shock. Install this kit only in the luminaires that have the

construction features and dimensions show in the photographs and/or drawings.

• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or

other sharp objects.

CAUTION

• Disconnect power at the source before installation. Do not simply switch o xture.

• This item is rated at 120-277V. Installer must determine whether they have 120-277V at

the luminaire before installation.

• This device is not intended for use with emergency exits.

• Do not use with luminaire ballast.

• Do not use with dimmers.

• Do not use if product is damaged.

• Use with supplied non-shunted lamp holders only.

• Connect hot wire only to end cap with the Turolight logo driver side. Opposite end cap

requires no wiring.

• To avoid potential re or shock hazard, do not use this retrot kit in luminaires employing

shunted bi-pin lamp holders.

L~

Driver

N~

Volts

120-277

120-277

120-277

120-277

120-277

120-277

120-277

120-277

120-277

120-277

120-277

120-277

120-277

120-277

120-277

120-277

Note: Non-Shunted Lamp Holder Supplied with LED T8 Luminaire. Shunted lamp
holders are found only in uorescent luminaires with Instant-Start ballasts. Instant -start
ballasts can be identied by the words “Instant Start” or “I.S.” marked on the ballast. This
designation may be in the form of a statement pertaining to the ballast itself, or may be
combined with the marking for the lamps with which the ballast is intended to be used.
For more information, contact the Turolight representative.

• “This luminaire has been modified and can no longer operate the originally intended

lamp,” shall be marked on the retrot luminaire where readily visible by the user during
normal maintenance including relamping (sticker supplied).

• Risk of re or electric shock. Do not modify the circuitry or any electrical components of tube.

• Installers should not disconnect existing wires from lampholder terminals to make new

connections at lampholder terminals. Instead installers should cut existing lampholder
leads away from the lampholder and make new electrical connections to lampholder
lead wires by employing applicable connectors.

• Suitable for damp location.

• Suitable for “Type IC” or “Type Non-IC” luminaires. No external weight or mechanical force

on tube or components.

• Beware of electric shock when installing tube.

• Dispose of uorescent lamps and ballst according to local/provincal/federal regulations.

• Contact your local Turolight Distributor if you have any questions about the installation of this lamp.

L~

Driver

N~

Hot Connecting End

Non-Shunted Lamp Holder

THE RETROFIT ASSEMBLY IS ACCEPTED AS A COMPONENT OF A FLUORESCENT
LUMINAIRE WHERE THE SUITABILITY OF THE COMBINATION SHALL BE DETERMINED
BY CSA OR AUTHORITIES HAVING JURISDICTION.

COMPLIANT

TO ORDER PLEASE CALL 1-877-736-0447 OR EMAIL: [e-mail]

Tel: [phone] • Toll Free: 1 [phone] • Fax: [phone] • Email: [e-mail] • Website: www.turolight.com

Instructions

1. Read all WARNING/CAUTIONS before continuing this section.

2. Ensure xture is 120-277V.

3. Disconnect power at the source.

4. Remove lens if applicable, remove cover and uorescent tubes.

5. Cut all wires that connect ballast. Properly discard ballast or cap o wires.

6. Replace lamp holders at power end with supplied non-shunted lamp holders.

7. Connect hot wire from power source into supplied non-shunted Lamp Holder
“Hot In”.

8. Connect neutral wire from power source into supplied non-shunted Lamp
Holder “Neutral In”.

9. If installing multiple lamps, continue reading. Otherwise skip to section 14.

10. Connect separate hot wire into “Hot Out” from primary source lamp holder

and connect that wire into “Hot In” on the adjacent tube.

11. Connect separate neutral wire into “Neutral Out” from primary source lamp

holder and connect that wire into “Neutral In” on the adjacent tube.

12. Continue this process for additional lamps.

13. Do not wire opposite end of lamp holder.

14. Install lamp with the Turolight logo (driver side) into the wired end.

15. Visibly ax “Modication Sticker” and reinstall housing cover and lens if

applicable.

16. Return power back to source and installation is now completed.

Power Source

120/277V

Live

Neutral

Live

Neutral

Hot Neutral

inin

out out

3 Lamp Conguration

The wires pass to lampholder rst, then to pin.

Single Tube Connection

DISCONNECTOR

The wires pass to lampholder rst, then to pin.

Multiple Tube Connection

Note: The luminaire shall only mount max. 4 tubes.

COMPLIANT

TO ORDER PLEASE CALL 1-877-736-0447 OR EMAIL: [e-mail]

Tel: [phone] • Toll Free: 1 [phone] • Fax: [phone] • Email: [e-mail] • Website: www.turolight.com