Turnigy Accuel C150 Instruction Manual

C 150 AccucelC 150 Accucel

150W 10A Smart Battery Balance Charger

Instruction Manual

TABLE OF CONTENTS

INTRODUCTION

SPECIFICATION

CAUTION and NOTES

BATTERIES INFO and MAX CHARGE CURRENT

PROGRAM OF LiIon/LiPo/Lilo/LiFe/LiHV

WORKING INTERFACE

PROGRAM OF NiMH/NiCd

WORKING INTERFACE

PROGRAM of PB(lead-Acid)

WORKING INTERFACE

PROGRAM OF USER SETTINGS

PROGRAM OF EXTRA FUNCTION

PROGRAM OF LOAD MEMORY

ERROR INFORMATION

SUPPORT AND SERVICES

1

02

03

04

05

07

08

09

10

11

12

13-14

15

16

17

18

INTRODUCTION

Thank you for purchasing the Accucel 150W 10A Touch charger. Designed for both

rookies and professionals, this system is extremely versatile for the safety and the best

use of your system, please read this manual carefully.

Dec/inc
To select sub
program To
alter the value

Batt type/stop
To select
main program
To stop the
operation

Output port

Temp.

Balance port

PC Link

1602 LCD
screen

USB

(5V 2.1A)

Start/enter
To resume or
start the
operation

Power Switch

AC 100-240V

DC 11-18V

Cooling Fan

2

SPECIFICATION

Product Model: Accessories

AC Input Voltage

DC Input Voltage

Charge power

Charge current

Discharge current

LiIon/LiPo/Lilo/LiFe/LiHV

NiCd/NiMH

Pb

Smart Battery

Net weight

Dimension

Accucel 150W 10A
Smart Battery Balance Charger

100-240V

11-18V

150W

0.1-10A

0.1-2A

1-6cells

1-15cells

2-20V

I/II/III

0.75Kg

145x105x64mm

Adapter Board 1 set

Extra Cable x1 pc

Extra Cable x1pc

AC Cord x1pc

3

CAUTION AND NOTES

This charger is ONLY suitable for charge rechargeable LiPo, LiFe, LiHV, NiCd, NiMH, Smart
and Pb batteries. Do not attempt to charge dry cells, charge other types of batteries may
cause fire or explosion.

Set up the Input Power Limit/Low Input VOLT Cutoff correctly in the USER SETTING of the

DC power supply.

Pay attention to the charger during use. Do not leave the charger unattended.

Never charge the dead or damaged batteries.

Do not attempt to charge a battery pack containing different types of batteries.

Do not use damaged cables.

Do not use the charger close by a flammable object. Use only in well-ventilated areas.

Only charge the rechargeable batteries that meet the product specifications of this charger.

DO NOT allow water, moisture or foreign objects into the charger.

DO NOT use in humid locations. Do not operate with wet hands.

DO NOT attempt to disassemble the charger.

DO NOT use the charger on fleecy materials, such as carpets, blankets, beds and cushions.

DO NOT block the cooling fan and the air inlet.

Strongly recommend balancing Lithium packs. An unbalanced pack may damage during
discharging.

General default charging current is preset at 1C. Please read manual carefully of the battery

and setup the suitable current to charge the battery. Higher C charging/ discharge current may

damage the battery, even cause fire.

4

BATTERIES INFO and MAX CHARGE CURRENT

Battery Type

LiHV

LiPo

LiIo

LiFe

NiMH / NiCd

No. of Cells Rated Voltage (V)

1 3.8 0.1 - 10.0A
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
7
8

7.6 0.1 - 10.0A

11.4 0.1 - 10.0A

15.2 0.1 - 10.0A

19.0 0.1 - 10.0A

22.8 0.1 - 10.0A

3.7 0.1 - 10.0A

7.4 0.1 - 10.0A

11.1 0.1 - 10.0A

14.8 0.1 - 10.0A

18.5 0.1 - 10.0A

22.2 0.1 - 10.0A

3.6 0.1 - 10.0A

7.2 0.1 - 10.0A

10.8 0.1 - 10.0A

14.4 0.1 - 10.0A
18 0.1 - 10.0A

21.6 0.1 - 10.0A

3.3 0.1 - 10.0A

6.6 0.1 - 10.0A

9.9 0.1 - 10.0A

13.2 0.1 - 10.0A

16.5 0.1 - 10.0A

19.8 0.1 - 10.0A

1.2 0.1 - 10.0A

2.4 0.1 - 10.0A

3.6 0.1 - 10.0A

4.8 0.1 - 10.0A

6 0.1 - 10.0A

7.2 0.1 - 10.0A

8.4 0.1 - 10.0A

9.6 0.1 - 10.0A

Charger Current (A)

5

Battery Type

NiMH / NiCd

Pb

LiPo

LiIo

LiFe

LiHV

NiMH
NiCd

Pb

No. of Cells Rated Voltage (V)

9
10
11
12
13
14
15

1

2

3

4

5

6

7

8

9
10

11
12

Voltage Level : 4.2V/Cell Max Charge Voltage : 3.7V/Cell Discharge Voltage Cut
off Level : 3.0V/Cell or Higher

Voltage Level : 4.1V/Cell Max Charge Voltage : 3.6V/Cell Discharge Voltage Cut
off level : 3.0V/Cell or Higher

Voltage Level : 3.8V/Cell Max Charge Voltage : 3.3V/Cell Discharge Voltage Cut
off Level : 2.0V/Cell or Higher

Voltage Level : 4.35V/Cell Max Charge Voltage : 3.8V/Cell Discharge Voltage Cut
off Level : 3.2V/Cell or Higher

Voltage Level : 1.6V/Cell Max Charge Voltage : 1.2V/Cell Discharge Voltage Cut
off Level : 0.80V/Cell or Higher

Voltage Level : 2.45V/Cell Max Charge Voltage : 2.0V/Cell Discharge Voltage Cut
off Level : 1.50V/Cell or Higher

10.8
12

13.2

14.4

15.6

16.8
18

10
12
14
16
18
20

22.0

24.0

2
4
6
8

Charger Current (A)

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

0.1 - 10.0A

6

PROGRAM OF LiIon/LiPo/Lilo/LiFe/LiHV

Press +/- to shift the work modes between the battery and the charger. Press ENTER to select Press
STOP to quit

BALANCE CHARGE: With this mode, the charger will charge the battery to
the termination voltage and balance each cell of the battery pack. Balance
port of the battery must be connected.

CHARGE: With this mode, the charger will charge the battery to the
termination voltage by CC-CV mode, and stop at 1/10 of setting current.

FAST CHARGE: With this mode, the charger will charge the battery to the
ermination voltage by CC-CV mode, and stop at 1/5 of setting current.

STORAGE: With this mode, the charger will charge or discharge the battery
to the storage voltage. (LiPo: 3.85V/S Lilo: 3.75 V/S Life: 3.45V/S)

DISCHARGE: With this mode, the charger will discharge the battery to the
termination voltage.

7

WORKING INTERFACE

8

PROGRAM OF NiMH/NiCd

CHARGE: With this mode, the charger will automtically detect the cell count
of the battery and charge the battery to the termination voltage.

DISCHARGE: With this mode, the charger will discharge the battery to the
termination voltage.

CYCLE: With this mode, the charger will charge and discharge the battery by
the user’s setting. (Current, Cell Count separately set in Charge and
Discharge mode)

9

WORKING INTERFACE

10

PROGRAM OF PB(Lead-Acid)

11

WORKING INTERFACE

12

PROGRAM OF USER SETTINGS

13

PROGRAM OF USER SETTINGS

Def ault

435 0

330 0

415 0-425 0

430 0-440 0

310 0-395 0

14

PROGRAM OF EXTRA FUNCTION

15

PROGRAM OF LOAD MEMORY

16

ERROR INFORMATION

17

SUPPORT AND SERVICES

WARRANTY

Hobbyking provide a period of one year product warranty from the date of purchase. The warranty

only applies to material or operational defects, which are present at the time of purchase. During

that period we will repair or replace free of service, charge for products deemed defective due to

those causes. This warranty is not valid for any damage or subsequent damage arising as a result

of misuse, modification or as a result of failure to observe the use guideline in this manual.

LIABILITY EXCLUSION

This charger is designed and approved exclusively for charge the types of battery stated in this

manual. HobbyKing do not accept any liability if the charger is used for any purpose other than

that stated. We are unable to ensure you follow the instructions come with the charger, and we

have no control over the methods you employ for using, operating and maintaining this device. For

this reason we are obliged to deny the liability for loss, damage or costs which are incurred due to

the incompetent or incorrect use and operation of this product, or which are connected with such

operation in any way. Unless otherwise prescibed by law, our obligation to pay compensation,

regardless of the legal argument employed, is limited to the invoice value of those products which

were immediately and directly involved in the event in which the damage occurred

www.hobbyking.com

18