TURISPORT SL MINIBATT FI80 User Manual

Fi80
WIRELESS FURNITURE CHARGER

Please register online
www.miniBatt.com/register

Thank you for selecting miniBatt products.

Thank you for purchasing a miniBatt wireless charger.
With this charger, you can charge any Qi-compatible device like a
smartphone or other device without the inconveniencies of tangled
cables. Just pop your smartphone on the charging surface and your
smartphone will start charging.

Parts of the product are magnetic. Metallic materials may be
attracted to the charger. Do not place any credit card or other
magnetic storage media near the product, because info stored
on them may be erased.

Read this user manual carefully before using the product.

Also, read the user manual for the device that you connect to the
charger.

Qi is a global standard that makes wireless charging possible for
your device. With this Qi-compatible device, you don´t need to
connect any cable to charge it.

Qi and Qi mark, are the trade marks of WPC.

This product applies for all Qi standard receivers.

PRODUCT INTRODUCTION:

miniBatt Fi80 is a visible or INVISIBLE wireless charger - the king

of versatility in the Wireless charging. It can easily be integrated into
virtually any piece of furniture and charge all kinds of devices of 5V
(Example: smartphones) and 9V (Example: tablets).

This medium power wireless charging transmitter is made in
accordance with QI standard (QI V1.2); it inducts the receiver with
one to one charging. It designs depending on A29 one coil larger
area with 5-9V power supply and 5W-10W output power. Both of led
and sound are set as charging indicators.

PRODUCT OVERVIEW:

Main housing

Front View

Cover Stickers

Back/side View

Micro USB to USB

cable

PARTS LIST (INCLUDED IN THIS PACKAGE):

- Wireless charger 1 PCS

- Cover 1 PCS

- Micro USB cable to USB cable 1 PCS

- Sticker 2 PCS

- User Manual 1 PCS

SAFETY INFORMATION:

- Never open or repair the device by yourself. It should only be done
by an authorized specialist.

- Do not install the device under an electrical conductive surface.
Never use the device if it is damaged or wet.

- Observe a sufficient distance from warm or wet elements.

- Do not use the device outdoors.

- Remove dust and what residues from the milled hole before
installation.

- Make sure that while charging no metal parts are between the
Fi80 and the charging device.

- Make sure that all electrical connections and supply cables
connected to other devices are in accordance with safety
guidelines and with the instruction manual.

- Pay attention not to overcharge the power sockets and supply
cables, it could cause fire or electric shock.

- Keep all parts out of reach of children.

- Avoid strong shocks or impacts which could damage the electric
circuits.

- Never replace damage power supplies yourself! Disconnect the
devices and contact a specialist.

- The power adapter used in conjunction with the wireless charge
must be a SELV type (Safety Extra Low Voltage).