Turcom AcoustoShock Mini TS-456 User Manual

Turcom AcoustoShock Mini (TS-456) – Wireless Bluetooth

Speaker

User Manual

Accessories:

1. Micro USB Cable ( for charging )

2. 3.5mm Audio cable ( AUX-in cable )

3. User Manual

4. Bicycle Handlebar Clamp

Bluetooth Connection:

Press and hold the power button to turn on the speaker. Blue LED light will flash to
indicate the speaker is in Bluetooth pairing mode.

Connect to mobile phones/tablet PCs/computers:

1. Turn on the speaker

2. Activate Bluetooth function on your device

3. Go to Bluetooth settings on your device and scan for new Bluetooth devices

4. Turcom TS-456 should appear on the list of available Bluetooth devices. Click on
TS-456 to pair.

5. If your device requires a pairing code, enter “0000” and confirm.

6. After successful pairing, your speaker will sound a prompt tone and the flashing LED

light will stop flashing.
Note: Pairing time is varies between different devices. Once the speaker successfully
pairs with a device, it will auto connect to those devices that were already paired before.
The speaker only can only store in memory the last 8 paired devices.

Hands-Free Phone Function:

If the speaker is paired with a phone, when a voice call is received, the speaker will ring to
notify the incoming call. Press button on the speaker to answer the call and talk to

the speaker directly. Press button again to end the call. When the call ends, the
speaker will return to playback mode.

Press and hold button to reject the incoming call.

AUX-IN Connection:

TS-456 comes with one Aux-In port to connect it to non-Bluetooth devices, such as,
mobile phones, MP3 players, PCs and laptops with a 3.5mm jack audio cable. Connect
the 3.5 mm Aux-In cable (included) to the speaker and to the audio device. The LED light
will turn green in Aux-In mode.

Under Bluetooth mode when the 3.5mm Aux-In cable is inserted, the speaker will switch
to wired mode automatically and will exit Bluetooth mode.

Low power indication: When the charge level drops to 10% of total capacity the speaker
will prompt low power level audio warning.

Charging the Speaker:

Connect the micro USB charging cable to a computer or a USB charger. LED light
will be red during charging. Red LED goes off upon completed charge. A full
charge takes approximately 5-6 hours.

Speaker Interfaces:

Aux-In Port: 3.5 mm wired audio input connector
Charging interface: Micro USB; Input 5V

Specifications:

- Dimensions: 3.8 inch x 3.4 inch x 1.9 inch

- Weight: 8 oz.

- Bluetooth Compatibility: Bluetooth 2.1 Class II and supports A2DP V1.2, AVRCP V1.4
profiles.

- Transmission distance: up to 10 m