turck Uprox+ BI15U-EM30WD-AP6X-H1141/3GD Quick Start Manual

Inductive sensor
For the food industry
BI15U-EM30WD-AP6X-H1141/3GD

Type code BI15U-EM30WD-AP6X-H1141/3GD

Ident no. 1634855

Rated switching distance Sn 15 mm
Mounting conditions flush
Assured switching distance
Repeatability
Temperature drift

Hysteresis 3…15 %
Ambient temperature -40…+100 °C

ð (0,81 x Sn) mm
ð 2 % of full scale
ð ± 10 %
ð ± 20 %, ð -25 °C , ï +70 °C

in the explosion hazardous area see instruction
leaflet

■ ATEX category II 3 G, Ex Zone 2

■ ATEX category II 3 D, Ex Zone 22

■ Threaded barrel, M30 x 1.5

■ Stainless steel, 1.4404

■ Front cap made of liquid crystal poly-

mer

■ Factor 1 for all metals

■ Resistant to magnetic fields

■ Temperatures -40 °C … +100 °C

■ High protection class IP69K, for harsh

environments

■ Special double-lip seal

■ Protection against all common acid and

alkaline cleaning agents

■ Laser engraved label, permanently legi-

ble

■ DC 3-wire, 10…30 VDC

■ NO contact, PNP output

■ M12 x 1 male connector

Wiring Diagram

Operating voltage 10… 30VDC

Residual ripple
DC rated operational current
No-load current I
Residual current
Rated insulation voltage
Short-circuit protection yes/ cyclic
Voltage drop at I
Wire breakage / Reverse polarity protection yes/ complete
Output function 3-wire, NO contact, PNP
Protective insulation
Switching frequency 0.75 kHz

Approval acc. to ATEX test certificate TURCK Ex-10002M X
Device designation

Construction Threaded barrel, M30 x 1.5
Dimensions 62 mm
Housing material Stainless steel, V4A (1.4404)
Active area material Plastic, LCP
Connector housing plastic, PP
Admissible pressure on front cap
Max. tightening torque housing nut 75 Nm
Connection Flange connector, M12 x 1
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP68 / IP69K
MTTF 874 years acc. to SN 29500 (Ed. 99) 40 °C

0

e

ð 10 % U

ss

ð 200 mA
ð 20 mA
ð 0.1 mA
ð 0.5 kV

ð 1.8 V

÷

É II 3 G Ex nA IIC T4 Gc/II 3 D Ex tc IIIC T110°C

Dc

ð 10 bar

Functional principle

The inductive sensors for the food industry
are absolutely tight and resistant to cleaning
agents and disinfectants,thanks to the LCP
front cap and the stainless steel housing.

Derating curve

Switching state LED yellow

Edition • 2016-05-14T08:17:29+02:00

1 / 4 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. [phone] ñ Fax [phone] ñ [e-mail] ñ www.turck.com

Inductive sensor
For the food industry
BI15U-EM30WD-AP6X-H1141/3GD

Distance D 60 mm

Distance W 3 x Sn

Distance T 3 x B

Distance S 1.5 x B

Distance G 6 x Sn

Diameter of the active area B Ø 30 mm

All flush mountable uprox®+ threaded barrel types are

also recessed mountable. Safe operation is ensured if

the sensor is screwed in by half a turn.

Edition • 2016-05-14T08:17:29+02:00

2 / 4 Hans Turck GmbH & Co.KG ñ D-45472 Mülheim an der Ruhr ñ Witzlebenstraße 7 ñ Tel. [phone] ñ Fax [phone] ñ [e-mail] ñ www.turck.com