How it Works
turck
Loading...
T
U
V
Loading...
Loading...
TX110
Quick Start Manual
4 pgs856.04 Kb0

turck HMI Series, TX107, TX100, TX110, TX104 Operating Instructions Manual

Your Global Automation Partner
Operating instructions
TX100
HMI Series
2
3
2018/09
1 About this document 5
1.1 Target Groups 5
1.2 Explanation of symbols 5
1.3 Additional Documents 5
1.4 Feedback about these instructions 6
2 product overview 6
2.1 Product Identication 7
2.2 Type Code 7
2.3 List of Available Devices 8
3 Standards and Approvals 8
3.1 Special Instruction for Use 8
4 Technical features 9
4.1 Technical Data 9
4.2 Environmental Conditions/Protection Class 9
4.3 Electromagnetic Compatibility (EMC)/Durability 10
4.4 Dimensions 11
4.4.1 TX104 12
4.4.2 TX107 12
4.4.3 TX110 14
5 Installing the HMI 15
5.1 Installation Environment 15
5.2 Mounting of the HMI 15
6 Connecting 16
6.1 Connecting the TX104 16
6.2 Connecting the TX107 16
6.3 Connecting the TX110 17
6.4 Serial port 18
6.5 Ethernet ports 19
6.6 USB port 19
7 Connecting the Power Supply 19
7.1 Grounding the device 20
8 Cleaning faceplates 21
9 Getting Started 21
9.1 Programming with TX VisuPro 21
10 Adapting the System Settings 22
10.1 Access the System Settings in User Mode 22
10.2 Access the System Settings in System Mode 23
11 Unpacking and Packing the Device 24
Table of Contents
4
11.1 TX104/TX107 24
11.2 TX110 25
12 Appendix: Accessories 25
12.1 Mounting Material/Power Supply Connector 25
12.2 USB/SD Accessory 25
5
2018/09
1 About this document
These operating instructions describe the structure, functions and the use of the product and will help you to operate the product as intended. Read these instructions carefully before using the product. This is to avoid possible damage to persons, property or the device. Retain the in­structions for future use during the service life of the product. If the product is passed on, pass on these instructions as well.
1.1 Target Groups
These instructions are aimed at qualified personnel and must be carefully read by anyone mounting, commissioning, operating, maintaining, dismantling or disposing of the device.
1.2 Explanation of symbols
The following symbols are used in these instructions:
DANGER!
DANGER indicates a dangerous situation with high risk of death or severe injury if not avoided.
WARNING!
WARNING indicates a dangerous situation with medium risk of death or severe injury if not avoided.
CAUTION!
CAUTION indicates a dangerous situation of medium risk which may result in minor or moderate injury if not avoided.
NOTICE!
NOTICE indicates a situation which may lead to property damage if not avoided.
NOTE
NOTE indicates tips, recommendations and useful information on specific actions and facts. The notes simplify your work and help you to avoid additional work.
CALL TO ACTION
This symbol denotes actions that the user must carry out.
RESULTS OF ACTION
This symbol denotes relevant results of actions.
6
About this document
1.3 Additional Documents
The following additional documents are available online at www.turck.com
■
Data sheet
■
Quick Start Guide
■
CAD data
■
Online help for TX Visu Pro
1.4 Feedback about these instructions
We make every effort to ensure that these instructions are as informative and as clear as possi­ble. If you have any suggestions for improving the design or if some information is missing in the document, please send your suggestions to techdoc@turck.com.
7
2018/09
2 product overview
The graphical user interface of the TX100 HMIs is created with the visualization software Suite TX VisuPro. The TX VisuPro software supports the following functions, among others:
■
Full vector graphic support, gallery of vector symbols and objects
■
Screen object dynamics
■
Multilanguage applications with TrueType fonts.
■
Data display (numerical, text, bargraph, analog gauges and graphic image formats)
■
Data acquisition and logging
■
Trend presentation
■
Alarm handling
■
Scheduler and timed actions
■
Recipes
■
Security and user management
■
Email and RSS feeds
■
Several communication drivers, multiple-driver communication capability
■
Remote monitoring and control with Client-Server functionality
■
On-line and Off-line simulation with TX VisuPro
■
Scripting language for automating HMI applications
■
Script debugger
2.1 Product Identication
The manual refers to the following models:
■
TX104 Operator interface with TFT color 4.3” widescreen display touchscreen
■
TX107 Operator interface with TFT color 7” widescreen display touchscreen
■
TX110 Operator interface with TFT color 10.1” widescreen display touchscreen
The type plate is located on the rear of the device. An example of this plate is shown in the figure below:
TX110 Product model name 100002313 Product part number 1832 Year/week of production AA… Serial number number V… Internal version ID of the product
8
Standards and Approvals
2.2 Type Code
TX 1 07 – 00 VP ST
TX
Product Series
Product series TX Turck HMI/PLC
1
Series
Series 1 TX100 series
04
Screen Size
Screen size 04 4.3" 07 7" 10 10,1"
00
SPS
SPS
00 HMI without SPS functionality
XX
Display
Display
VP TX VisuPro Runtime
ST
Communication
Communication
ST Standard HMI protocol
Fig.1: Type Code TX100
2.3 List of Available Devices
Ident no. Device
100002311 TX104-00VPST
100002312 TX107-00VPST
100002313 TX110-00VPST
3 Standards and Approvals
The products have been designed for use in an industrial environment in compliance with the 2014/30/EU EMC Directive.
The products have been designed in compliance with: EN 61000-6-4 EN 55011 Class A EN 61000-6-3 EN 55022 Class B EN 61000-6-2 EN 61000-4-2 EN 61000-6-1 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-8 EN 60079-0 EN 60079-7 EN 60079-11
NOTICE!
Operation in residential and commercial areas
Electromagnetic disturbances!
In case of the operation of the devices in residential and commercial areas, observe
the measurement values according to IEC-61000-6-3.
The products are in compliance with the Restrictions on Certain Hazardous Substances (RoHS) Directive 2011/65/EU.
In compliance with the above regulations the products are CE marked.
9
2018/09
3.1 Special Instruction for Use
■
The equipment shall only be used in an area of not more than pollution degree 2, as defined in IEC/EN 60664-1.
■
The equipment shall be installed in an enclosure that provides a degree of protection not less than IP 54 in accordance with IEC/EN 60079-7.
■
Transient protection shall be provided that is set at a level not exceeding 140 % of the peak rated voltage value at the supply terminals to the equipment.
■
Care shall be taken not to allow layers of dust to form on the graphic panel in a way that might cause the accumulation of static charges.
4 Technical features
4.1 Technical Data
TX104 TX107 TX110
Touchscreen technology Resistive
Display/backlight TFT Color /
LED
Colors 64 K
Brightness 200 Cd/m² typ.
Resolution 480 × 272 800 × 480 1024 × 600
Diagonal (inches) 4,3” widescreen (16:9) 7’’ widescreen (16:9) 10.1’’ widescreen (16:9)
Dimming Yes
CPU ARM Cortex - A8 – 300 MHz ARM Cortex - A8 – 1 GHz
Operating system Linux 3.12
Flash 2 GB 4 GB 4 GB
SD card slot No
RAM 256 MB DDR 512 MB DDR 512 MB DDR
Serial port 1× DB 9 (sofware configurable as RS232, RS485 or RS422)
Ethernet port 1 × 10/100 Mbit
USB Host port 1 × USB 2.0, max. 500 mA
Power supply DC Power Connector - AWG24 wire size - R/C Terminal Blocks (XCFR2), Female pitch 5.08
mm, torque 4.5 lb-in. 3 conductor 1,5 mm² wire size minimum, DC
Real time clock Yes
RTC backup Supercapacitor
Recipe memory Flash
Operating voltage 24 VDC (10…32 VDC)
Current consumption (at 24 VDC) 0.25 A 0.30 A 0.38 A
Weight 0.4 kg 0.6 kg 1 kg
Input protection Automatic
Accuracy RTC (at 25 °C) < 100 ppm
NOTE
For applications requiring compliance with EN 61131-2 and specifically in reference to 10 ms voltage dips, the minimum power supply voltage is 18 VDC.
Loading...
+ 18 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use