How it Works
turck
Loading...
T
Loading...
Loading...
TN866-Q120L130-H1147

turck TN915-Q120L130-H1147, TN920-Q120L130-H1147, TN921-Q120L130-H1147, TN865-Q175L200-H1147, TN902-Q175L200-H1147 Operating Instructions Manual

...
Your Global Automation Partner
Operating Instructions
TN…-Q…L…-H1147
UHF Read/Write Heads
2
Contents
3
V01.00 | 2018/06
1 About These Instructions 5
1.1 Target groups 5
1.2 Explanation of symbols 5
1.3 Other documents 5
1.4 Naming convention 6
1.5 Feedback about these instructions 6
2 Notes on the Product 7
2.1 Product identication 7
2.2 Scope of delivery 7
2.3 Legal requirements 8
2.4 Manufacturer and service 8
3 For Your Safety 9
3.1 Intended use 9
3.2 Obvious misuse 9
3.3 General safety notes 10
4 Product Description 11
4.1 Device overview 11
4.1.1 Indication elements 11
4.2 Properties and features 11
4.3 Operating principle 12
4.4 Functions and operating modes 12
4.4.1 Operating frequency 13
4.4.2 Combination of UHF read/write heads and tags 13
4.5 Technical accessories 14
5 Mounting 15
5.1 Screw fastening on a mounting plate 16
5.2 Mounting with an application-specic adapter 17
5.3 Mast/tube mounting 18
5.4 Mounting with the RH-Q240L280/Q280L640 arm bracket 19
6 Connection 20
6.1 Wiring diagrams 20
7 Commissioning 21
8 Operation 21
8.1 LEDs 21
9 Setting and Parameterization 22
9.1 Connecting read/write heads with the PC 22
9.1.1 Connecting the read/write heads with a PC via the RFID interface 22
9.1.2 Connecting read/write heads with a PC via the interface converter 23
9.1.3 Creating a project in PACTware 24
9.2 Testing the read/write heads 27
9.2.1 Starting the RFID test 27
Contents
4
9.2.2 Start window – Overview 28
9.2.3 “RFID Test” – Main menu 29
9.2.4 “RFID Test” – “Basic Test” window 30
9.2.5 “RFID Test” – “Tag Actions” window 31
9.2.6 “RFID Test” – “Logger” window 34
9.2.7 “HF diagnosis” window 35
9.3 Setting read/write heads parameters via the DTM 36
9.3.1 Starting the extended read/write head parameter setting 36
9.3.2 Main menu – Overview 37
9.3.3 Choosing the access level 38
9.3.4 “Basic setup” 39
9.3.5 “Antenna” 39
9.3.6 “Communication” 39
9.3.7 “EPC Class1 Gen2” 39
9.3.8 “Error Handling” – Selectable parameters 39
9.3.9 “Event Handling” – Selectable parameters 39
9.3.10 “Post Read Filter” – Selectable parameters 39
9.3.11 “Signaling” – Selectable parameters 39
9.4 Device information via the DTM 40
10 Troubleshooting 42
11 Maintenance 42
12 Repair 42
12.1 Returning devices 42
13 Disposal 42
14 Technical Data 43
14.1 Technical data – TN865… 43
14.2 Technical data – TN902… 44
14.3 Technical data – TN840/920… 45
14.4 Technical data – TN917… 46
14.5 Technical data – TN866… 47
14.6 Technical data – TN902/915… 48
14.7 Technical data – TN920… 49
14.8 Technical data – TN921… 50
15 Appendix: Conformity Declarations and Approvals 51
15.1 EU conformity declaration 51
15.2 FCC/IC Digital Device Limitations – TN902-Q120L130-H1147 51
15.3 FCC/IC Digital Device Limitations – TN902-Q175L200-H1147 52
5
V01.00 | 2018/06
1 About These Instructions
This manual describes the setup, the functions and use of the product and helps you to operate the product for its intended use. Read the instructions carefully prior to using the product. This will prevent the risk of personal injury and damage to property. Keep these instructions safe during the service life of the product. If the product is passed on, pass on these instructions as well.
1.1 Target groups
These instructions are written for suitably qualified and trained personnel and must be read by anyone entrusted with the mounting, commissioning, operation, maintenance, disassembly or disposal of the device.
1.2 Explanation of symbols
The following symbols are used in these instructions:
DANGER
DANGER indicates an immediate hazardous situation, which, if not avoided, will result in death or serious injury.
WARNING
WARNING indicates a possible hazardous situation with the risk of death or serious injury if it is not prevented.
NOTICE
NOTICE indicates a situation that may cause possible damage to property if it is not prevented.
NOTE
NOTE indicates tips, recommendations and important information. The notes contain information, particular operating steps that facilitate work and possibly help to avoid additional work resulting from incorrect procedures.
MANDATORY ACTION
This symbol denotes actions that the user must carry out.
RESULT OF ACTION
This symbol denotes the relevant results of actions and procedures.
1.3 Other documents
Besides this document the following material can be found on the Internet at www.turck.com:
■
Data sheet
■
Quick start guide
■
RFID engineering manual
■
Startup manuals
6
About These Instructions
1.4 Naming convention
Common synonyms for “tags” are “data carriers”, “transponders” and “mobile data memory”. Read/write heads are also called “transceivers” or “readers”.
1.5 Feedback about these instructions
We make every effort to ensure that these instructions are as informative and as clear as pos­sible. If you have any suggestions for improving the design or if some information is missing in the document, please send your suggestions to techdoc@turck.com.
7
V01.00 | 2018/06
2 Notes on the Product
2.1 Product identication
These instructions apply to the following UHF read/write heads:
Type code Operating frequency Region
TN865-Q120L130-H1147 865…868 MHz Europe
TN902-Q120L130-H1147 902…928 MHz North America (USA,
Canada, Mexico)
TN840/920-Q120L130- H1147 920.5…924.5MHz China
TN917-Q120L130-H1147 917…920.8 MHz Korea
TN866-Q120L130-H1147 866…868 MHz Russia
TN902/915-Q120L130-H1147 915…928MHz Brazil
TN920-Q120L130-H1147 920…926 MHz Australia, New Zealand
TN921-Q120L130-H1147 920…925 MHz Singapore
TN865-Q175L200-H1147 865…868 MHz Europe
TN902-Q175L200-H1147 902…928 MHz North America (USA,
Canada, Mexico)
TN840/920-Q175L200- H1147 920.5…924.5MHz China
TN917-Q175L200-H1147 917…920.8 MHz Korea
TN866-Q175L200-H1147 866…868 MHz Russia
TN902/915-Q175L200-H1147 915…928MHz Brazil
TN920-Q175L200-H1147 920…926 MHz Australia, New Zealand
TN921-Q175L200-H1147 920…925 MHz Singapore
2.2 Scope of delivery
The following are included in the scope of delivery:
■
Read/write head
■
Quick start guide
■
Mounting aid incl. fixing clamp and 2 M6 ×8 screws
■
Grounding set
■
4 screw covers
■
Turck RFID-DVD
■
1 screw cap M12
8
Notes on the Product
2.3 Legal requirements
The devices comply with the following regulations:
Device Region of use Regulations
TN865-Q…L…-H1147 e.g. Europe – 2014/30/EU (electromagnetic compatibility)
– 2014/35/EU (low voltage) – 2014/53/EC (RED Directive) – 2011/65/EU (RoHS)
TN902-Q…L…-H1147 USA FCC Rules Part 15
Canada Industry Canada RSS-210
Mexico IFETEL, Dictamen (electrical safety)
TN840/920-Q120L130- H1147 China SRRC
TN917-Q120L130-H1147 Korea KCC
TN866-Q120L130-H1147 Russia Import license for wireless devices
TN902/915-Q120L130-H1147 Brazil ANATEL
TN920-Q120L130-H1147 Australia ACMA
New Zealand RSM
TN921-Q…L…-H1147 Singapore IDMA
NOTE
Additional certification may be required, depending on the region of use. Tests for other national approvals can be carried out and implemented if necessary.
2.4 Manufacturer and service
Turck supports you in your projects – from the initial analysis right through to the commission­ing of your application. The Turck product database offers you several software tools for pro­gramming, configuring or commissioning, as well as data sheets and CAD files in many export formats. You can access the Product Database directly via the following address:
www.turck.de/products
For further inquiries in Germany contact the Sales and Service Team on: Sales: +49 208 4952-380 Technical: +49 208 4952-390
For overseas inquiries contact your national Turck representative.
Hans Turck GmbH & Co. KG Witzlebenstraße 7 45472 Mülheim an der Ruhr Germany
9
V01.00 | 2018/06
3 For Your Safety
The product is designed according to state of the art technology. Residual hazards, however, still exist. Observe the following warnings and safety regulations in order to prevent danger to persons and property. Turck accepts no liability for damage caused by failure to observe these warnings and safety instructions.
3.1 Intended use
The devices are designed only for use in industrial areas. The BL ident® read/write heads are used for contactless data exchange with the BL ident® tags in the BL ident® UHF RFID system. The following table shows the operating frequency of the devices.
Type code Operating frequency
TN865-… 865…868 MHz
TN902-… 902…928 MHz
TN840/920-… 840.5…844.5MHz and 920.5…924.5MHz
TN917-… 917…920.8 MHz
TN866-… 866…868 MHz
TN902/915-… 902…907.5MHz and 915…928MHz
These devices may only be started up under the following conditions:
■
The particular frequency range is permissible for the use of UHF-RFID.
■
The operating frequency range of the devices is compliant with the permissible UHF RFID range of the region.
■
A valid certification and/or approval is available for the region of use.
The device must only be used as described in these instructions. Any other use is not in accor­dance with the intended use. Turck accepts no liability for any resulting damage.
3.2 Obvious misuse
■
The devices are not suitable for the protection of persons or property and must not be used in safety-related applications.
■
The devices must not be used under water.
10
For Your Safety
3.3 General safety notes
■
The device must only be fitted, installed, set, operated and maintained by trained and quali­fied personnel.
■
The devices only meet the EMC requirements for industrial areas and are not suitable for use in residential areas.
■
Only use the devices in compliance with the applicable national and international regula­tions, standards and laws.
■
Any extended stay within the area of radiation of the UHF read/write heads may be harmful to health. Observe minimum distances from the actively radiating surface of the UHF read/ write head:
Region max. permissible total radiant
output power
Safety distance
Europe, Russia, China 2 W ERP (according to ETSI) > 0.24 m
USA, Canada, Brazil, Korea, Australia, New Zealand
4 W EIRP > 0.30 m
Singapore 0.5 W ERP > 0.24 m
■
The radiation of the UHF read/write heads may have an adverse effect on the operation of electrically controlled medical equipment. Keep an additional distance from active radiation sources up to the maximum transmission distance.
11
V01.00 | 2018/06
4 Product Description
The UHF read/write heads have a rectangular design (120 × 130 mm or 175 × 200 mm). The devices are rated to degree of protection IP67 and are contained in an aluminum housing with a plastic front. The power supply to the device and data exchange with the controller are imple­mented via a BL ident® RFID interface. A 4-pin M12 x 1 connector is provided for connecting to the RFID interface.
4.1 Device overview
200
175
60
M12
LED
130
120
60
M12
LED
Fig. 1: Dimensions
– TN…-Q175L200-H1147
Fig. 2: Dimensions
– TN…-Q120L130-H1147
4.1.1 Indication elements
Each device is provided with three adjustable LEDs. An audible alarm can also be set using software tools.
4.2 Properties and features
■
Robust read/write heads in industrial design
■
Writing and reading of passive UHF tags in single and multitag mode
■
Read/write distances up to several meters (depending on ambient conditions, the parameter setting of the read/write head and the selected tag)
■
Compact design for mounting in restricted spaces
12
Product Description
4.3 Operating principle
The read/write heads are used for contactless data exchange with tags. For this the controller sends commands and data via the interface to the read/write head and receives the corre­sponding response data from the read/write head. The reading of the IDs of all RFID tags in the read area or the writing of an RFID tag with a specific production date are examples of typical commands. To communicate with the tag, the data of the read/write head is coded and trans­ferred via an electromagnetic field, which at the same time supplies the tags with power. A read/write head contains a transmitter and a receiver, an interface to the interface and a coupling element (coil and dipole antenna) for communicating with the tag. Electromagnetic wave propagation is used for the transmission between read/write head and tag on devices for the UHF range.
Fig. 3: Operating principle of UHF-RFID
The antenna of the read/write head generates electromagnetic waves. This produces a trans­mission window as a so-called air interface in which the data exchange with the tag takes place. The size of the transmission window depends on the combination of read/write heads and tags, as well as on the relevant environmental conditions. Each read/write head can communicate with a number of tags. This requires the read/write head and the tag to operate in the same frequency range. Depending on the power and frequency used, the device ranges vary from a few millimeters up to several meters. The speci­fied maximum read/write distances only represent typical values under laboratory conditions without allowing for the effect of materials. The achievable distances may vary due to compo­nent tolerances, the mounting situation in the application, ambient conditions and the effect of materials (particularly metal and liquids).
4.4 Functions and operating modes
The devices enable passive UHF tags to be read or written in single and multi-tag operation. For this the devices form a transmission zone that varies in size and range according to the tags used and the operating conditions of the application. Refer to the data sheets for the applicable maximum read/write distances. The devices can be fully tested, configured and parameterized from a PC using the specified software tools.
IC
Read/write head
Data carrier
UHF: electromagnetic wave
13
V01.00 | 2018/06
4.4.1 Operating frequency
The Turck BL ident® UHF system uses nationally specified transmission frequencies for the com­munication between the tags and read/write heads. These national operating frequencies for UHF are the frequency ranges that are individually specified by the national regulation bodies.
The operating frequency of the devices in the UHF band is for example 865…868 MHz for Eu­rope and 902…928 MHz for the USA. The BL ident® read/write heads in the UHF band can there­fore only be used in the countries they are intended for and must not be put into operation outside of these regions. As the BL ident® UHF tags are passive, and therefore do not radiate their own radio waves, these are suitable for use worldwide.
Turck offers different tag variants that are specially designed and optimized for national frequency bands in order to achieve as large a communication range as possible. Wide-band multi-range tags for international use are also available as an alternative.
The various Turck read/write heads support the following operating frequencies:
■
865...868 MHz (e.g. for Europe)
■
866…868 MHz (e.g. for Russia)
■
902...928 MHz (e.g. for USA and Canada)
■
920…925 MHz (e.g. for China and Singapore)
■
902...907.5 MHz and 915...928 MHz (e.g. Brazil)
■
917...920.8 MHz (e.g. for Korea)
The relevant national specifications for UHF such as frequency range, output and the status of any national regulations can be obtained from the Internet at:
http://www.gs1.org/docs/epcglobal/UHF_Regulations.pdf
For more detailed information please contact the regulation authorities of the country where you wish to use the UHF RFID system.
HF RFID systems can be run parallel to UHF RFID systems in an installation.
4.4.2 Combination of UHF read/write heads and tags
The UHF read/write heads form a transmission zone for which the size depends on the com­bination of read/write head and tag. The listed maximum read/write distances only represent typical values under laboratory conditions without the effect of materials. The achievable distances may be different due to component tolerances, mounting location in the application, ambient conditions and the effect of materials (particularly metal). For this reason, the application must be tested in all cases under real conditions (particularly with read and write operations in motion).
14
Product Description
4.5 Technical accessories
The following accessories are not supplied with the device:
Dimension drawing Type Ident no. Description


 



RH-Q240L280/Q280L640 7030296 Arm bracket for UHF read/write heads
15
V01.00 | 2018/06
5 Mounting
The devices can be mounted in any position.
Mount the device with the appropriate fixing accessories.
The minimum distance between two read/write heads using the same frequency depends on the maximum radiant power and the alignment of the antenna.
Fig. 4: Antenna alignment
Antenna alignment Minimum distance D for TN…-
-Q175L200-H1147 with ERP = 1 W
Minimum distance D for TN…-
-Q120L130-H1147 with ERP = 0.5 W
Back to back 0.5m 0.25m
Side by side 1m 0.5m
Front to front 2.5m 1.25m
NOTE
The stated values do not take into account the effect of the tags.
Tag Tag
TagTag
Tag Ta g
D
D
D
16
Mounting
5.1 Screw fastening on a mounting plate
Fasten the device with four M5 × 35 cylinder screws on a pre-drilled mounting plate.
Fig. 5: Screwing the read/write head onto the mounting plate
17
V01.00 | 2018/06
5.2 Mounting with an application-specic adapter
Make the adapter according to the following dimension drawings.
Fig. 6: Dimension drawing for TN…-Q120…
Fig. 7: Dimension drawing for TN…-Q175…
Fit the device at the intended mounting location
60
24
M6 x 8 (2x)
19.5 59
A
A
A - A
M5 x 35 (4x)
27
130
22
100
120
100
24
60
175
150
44
200
59
A - A
M5 x 35 (4x)
M6 x 10 (2x)
150
27
AA
Loading...
+ 37 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use