Turck Specialty Sensor Part Numbering Designation

Specialty Sensor Part Number Key

B I 10 U - G T 30 - A DZ 30 X2 Wiring Option* Special Option Code**

Mounting

B = embeddable
BID = high pressure sensor
N = nonembeddable
S = slot

Principle of Operation

I = inductive
IM = inductive magnet operated

Rated Operating Distance (mm)

Sensing Characteristics

FE = ferrous only
R = ring sensor
U =Uprox® Sensor

Housing Material Modier

E = stainless steel

Housing Style
Barrel - Metal

G = full threading, generally chrome plated brass
H = smooth, chrome plated brass or stainless steel
M = partial threading, chrome plated brass

Barrel - Plastic

K = smooth
P = full threading
S = partial threading

Rectangular

Q = metal or plastic, various rectangular styles

Limit Switch

CA = stubby ®, short aluminum housing, connector
CK = stubby ®, short plastic housing, connector

Slot

K = slot sensor, plastic housing

Ring

32SR = large plastic housing, static or dynamic output
Q = small rectangular plastic housing, static output
W = small plastic housing, dynamic output

Primary Barrel Modier

T = PTFE® coated

Housing Diameter or Height (mm)

Number of LEDs

(blank) = no LEDs
X = 1 LED
X2 = 2 LEDs

Voltage Range
AC/DC: (No SCP**)

3 = 20-250 VAC, 10-300 VDC

AC/DC: (Latched SCP)

30 = 20-250 VAC, 10-300 VDC 400 mA

DC:

4 = 10-65 VDC, polarity protected, pulsed SCP**
6 = 10-30 VDC, polarity protected, pulsed SCP
44 = 10-55 VDC
45 = 8.4-65 Volts

Output

D = 2-wire DC (transistor output)
DZ = 2-wire AC/DC, (power MOSFET output)
N = NPN transistor (current sinking)
P = PNP transistor (current sourcing)
Z = 2-wire AC or 2-wire AC/DC
M = high current solid state relay

Output Function

A = normally open (N.O.)
DA = dynamic output (ring sensor), normally open
R = normally closed (N.C.)
U = jumper programmable (N.O. or N.C.)
V = complementary outputs: one N.O., one N.C.
Y0 = NAMUR output, requires switching amplier
Y1 = NAMUR output, requires switching amplier, ATEX approved

Secondary Barrel Modier

E = extended barrel length
EE = extra long barrel length
FE = stainless steel face, extended barrel length
FM = stainless steel face, medium barrel length
M = medium barrel length
TC = terminal chamber
WD = washdown IP67/IP68/IP69K
F = stainless steel face, standard length

We reserve the right to make technical alterations without prior notice.

NOTE:
Part number keys are to assist in identication only.
Verify new part numbers with factory; some congurations are not possible.
* See next page Wiring Options and Special Option Codes.

C3

Turck Inc.

Specialty Sensor Part Number Key

Wiring Options*

A. Connectorized Sensor

Connector Family

B1 = Minifast®, 7/8”-16UN, metal, male
B2 = Minifast , 7/8”-16UN, plastic, male
B3 = Microfast®, 1/2”-20UNF, metal, male
H1 = Eurofast®, M12x1, metal or plastic, male
V1 = Picofast®, snap and M8x1, metal, male (Q08 snap only)
V2 = Picofast , snap and M8x1, male (Q08 only)

Connector/Sensor Transition

1 = straight
3 = straight with adapter
4 = right-angle with adapter

Bi2 - M12 - AN6X2 - H1 1 4 1

Wiring Conguration
Example:

0 = non-standard wiring
1 = standard wiring
3 = N.C. DC output on pin 4 (for US)
4 = N.O. 2-wire DC output on pin 4

Number of Pins
3 = 3
4 = 4
5 = 5

B. Potted Cable

Special Option Codes**

Example:

/S90 = TPU cable
/S97 = -40 °C (-40 °F) operating temperature
/S100 = +100 °C (+212 °F) operating temperature
/S120 = +120 °C (+248 °F) operating temperature
/S139 = submersible
/S907 = +160 °C (+320 °F) operating temperature
/S1009 = 250 ms internal o delay
/S1102 =+250 °C (+482 °F) operating temperature
/S1751 = approved for FM Class I, Div 2, groups A, B, C, and D

We reserve the right to make technical alterations without prior notice.

Bi2 - G12 - AN6X 7M

Cable Length

(blank) = 2 meter cable
7M = 7 meter cable
*M = custom cable lengths available

Bi 2-S12-AN7X /S100 or Bi10R-W30-DAN6X-H1141 /F2

Example:

/F2 = alternate oscillator frequency

Specialty Sensors

Turck Inc.

C4