Turck RI360P1-QR14-ELIU5X2-0.3-RS5 Datasheet

RI360P1-QR14-ELIU5X2-0.3-RS5
Inductive Angle Sensor – With Analog Output
Premium Line

Features

■

■

■

■

■

■

■

■

■

■

■

Wiring diagram

Technical data

Rectangular, plastic
Many mounting possibilities
P1-Ri-QR14 included in delivery
Measuring range displayed via LED
Immune to electromagnetic interference
Resolution, 12-bit
15…30 VDC
Analog output
Programmable measuring range
0…10 V and 4…20 mA
Cable with male connector, M12 × 1

Type

ID no. 1590854

Measuring principle

Starting torque shaft load (radial / axial) Not applicable because of contactless

Resolution 0.09°

Measuring range 0…360°

Nominal distance 1.5mm

Repeat accuracy ≤0.025% of full scale

Linearity deviation ≤0.3%f.s.

Temperature drift ≤ ±0.01% / K

Ambient temperature -25…+70°C

Operating voltage 15…30VDC

Residual ripple ≤10% U

Isolation test voltage ≤0.5kV

Short-circuit protection yes

Wire breakage/Reverse polarity protec­tion

Output type Absolute singleturn

Output function 5-pin, Analog output

Voltage output 0…10V

Current output 4…20mA

Load resistance voltage output ≥4.7kΩ

Load resistance, current output ≤0.4kΩ

Sample rate 800Hz

Current consumption < 50 mA

RI360P1-QR14-ELIU5X2-0.3-RS5

Inductive

measuring principle

ss

yes / yes (voltage supply)

Functional principle

The measuring principle of inductive angle
sensors is based on oscillation circuit coupling
between the positioning element and the
sensor, whereby an output signal is provided
proportional to the angle of the positioning
element. The rugged sensors are wear and
maintenance-free, thanks to the contactless
operating principle. They convince through
their excellent repeatability, resolution and
linearity within a broad temperature range.
The innovative technology ensures a high
immunity to electromagnetic DC and AC fields.

RI360P1-QR14-ELIU5X2-0.3-RS5 | 22-04-2021 18-22 | Technical modifications reserved

Hans Turck GmbH & Co. KG | 45466 Mülheim an der Ruhr, Germany | T [phone] | F [phone] | [e-mail] | www.turck.com 1|4

Technical data

Design

Rectangular,QR14

Dimensions 53.5x49x14mm

Flange type Flange without mounting element

Shaft Type Blind hole shaft

Shaft diameter D [mm] 6

6.35

Housing material Plastic, PBT-GF30-V0

Electrical connection Cable with connector,M12 × 1

Cable quality Ø5.2mm, Lif9YH-11YH, PUR, 0.3m

Halogen-free, flame-retardant acc. to
VDE

Core cross-section

5x0.34mm

2

Vibration resistance 55Hz (1 mm)

Vibration resistance (EN 60068-2-6) 20 g; 10…3000 Hz; 50 cycles; 3 axes

Shock resistance (EN 60068-2-27) 100 g; 11 ms ½ sinus; each 3x; 3 axes

Continuous shock resistance (EN

40 g; 6 ms ½ sinus; each 4000 x; 3 axes

60068-2-29)

Salt spray test (EN 60068-2-52) Severity degree 5 (4 test cycles)

Protection class IP68

IP69K

MTTF 138years acc. to SN 29500 (Ed. 99) 40

°C

Power-on indication

LED,Green

Measuring range display multifunction LED, green

green flashing

Included in delivery positioning element P1-Ri-QR14; for

technical details see data sheet

Mounting instructions

Mounting instructions/Description

Adapter pins provide more flexibility
Extensive range of mounting accessories
for easy adaptation
to many different shaft diameters.
LED function
Operating voltage
Green: Voltage is present
Displayed measuring range
Green: Positioning element is within the
detection range
Flashing green: Positioning element is within
the
measuring range with reduced signal quality
(e.g.
the distance is too great)
Off: Positioning element is outside the
sensing range
Functional safety thanks to the inductive
measuring principle
The measuring principle of RLC coupling
makes the sensor
absolutely wear-free and

Hans Turck GmbH & Co. KG | 45466 Mülheim an der Ruhr, Germany | T [phone] | F [phone] | [e-mail] | www.turck.com 2|4

RI360P1-QR14-ELIU5X2-0.3-RS5 | 22-04-2021 18-22 | Technical modifications reserved