Turck Rectangular Inductive Sensor Part Numbering Designation

Rectangular Inductive Sensor Part Number Key

B i 15 - Q 20 - A P 6 X2 Wiring Option* Special Option Code**

Mounting

B = embeddable
N = nonembeddable

Principle of Operation

i = inductive

Rated Operating Distance (mm)

Sensing Characteristics

S = side sensing on Q10S sensor
U = Uprox® Sensor

Housing Style
Rectangular

K = smooth
Q = metal or plastic, various rectangular styles

Limit Switch

CA = Stubby®, short aluminum housing, connector
CK = Stubby, short plastic housing, connector
CP = Combiprox®, plastic housing, terminal chamber
base with removable sensor

Housing Height (mm)

NOTE:

Part number keys are to assist in identication only.
Verify new part numbers with factory; some congurations are not possible.

Secondary Housing Modier

SR = straight terminal chamber

Output Function

A = normally open (N.O.)
F = connection programmable (N.O. or N.C.)
V = complementary outputs: one N.O., one N.C.
Y0 = NAMUR output, requires switching amplier
Y1 = NAMUR output, requires switching amplier/ATEX approved

Number of LEDs

(blank) = no LEDs
X = 1 LED
X2 = 2 LEDs

Voltage Range
AC/DC: (No SCP**)

3 = 20-250 VAC, 10-300 VDC
31 = 20-250 VAC, 10-300 VDC, plastic barrel

AC/DC: (Latched SCP)

30 = 20-250 VAC, 10-300 VDC 400 mA
32 = 20-250 VAC, 10-300 VDC 400 mA

DC:

4 = 10-65 VDC, polarity protected, pulsed SCP**
6 = 10-30 VDC, polarity protected, pulsed SCP
**SCP = short-circuit and overload protection

Output

D = 2-wire DC (transistor output)
DZ = 2-wire AC/DC, (power MOSFET output)
N = NPN transistor (current sinking)
P = PNP transistor (current sourcing)
Z = 2-wire AC or 2-wire AC/DC

Rectangular Inductive Sensors

Wiring Options*

A. Connectorized Sensor

We reserve the right to make technical alterations without prior notice.

Connector Family

B1 = Minifast®, Metal, Male
B2 = Minifast, Plastic, Male
B3 = Microfast®, Metal, Male
H1 = Eurofast®, Metal or Plastic, Male
V1 = Picofast®, Metal, Male
V2 = Picofast, Snap and M8x1, Male (Q08 Only)

Connector/Sensor Transition

1 = straight

B. Potted Cable

Special Option Codes**

Option Code
Example:

/S34 = Weld Field Immune
/S97 = -40 °C (-40 °F) Operating Temperature
/S100 = +100 °C (+212 °F) Operating Temperature

Bi15 - Q20 - AN6X2 - H1 1 4 1

Wiring Conguration
Example:

1 = Standard
3 = N.C. DC Output on Pin 4 (for US)

Number of Pins

Bi15 - Q20 - AN6X2 - 7M

Cable Length

Blank = 2 meter cable
7M = 7 meter cable

Bi - 5 - Q08 - AN6XS /S34

/S1590 = CK/CA40 sensors with Weldguard laminate
/S1591 = CA40 sensors with Weldguard and Armorguard

Turck Inc.

A2