Turck PT7500PSIG-33-LI3-H1131 Data Sheet

Pressure Transmitter with current output (2-wire) PT510-7500PSIG-13-LI3-H1131
Type designation PT510-7500PSIG-13-LI3-H1131
Ident-No. 6831580
Pressure range
ð 1500 bar ï 2500 bar
Compact and robust design
Pressure connection with integrated
peak pressure aperture
Accuracy hardly affected by tempera-
ture within entire range -40…+125°C
Excellent EMC properties
Pressure range 0…7500 psi rel.
Wiring Diagram
Functional principle
The pressure transmitters of the PT …-3 se­ries operate with a stainless steel measuring cell. Depending on the output type, the pro­cessed signal is available either as 4…20mA (2-wire) or 0…10V (3-wire) analog output.
Power supply
Operating voltage 8…33 VDC Current consumption Short-circuit/reverse polarity protection yes / yes Protection type and class IP67 / III
Outputs
Output 1 Analog output
Analog output
Current output 4…20 mA Operating range 4…20 mA (2-wire) Load Accuracy LHR analog output ± 0.5 % FS BSL Calibration accuracy 0-point 0.5 % FS Calibration accuracy full scale 0.5 % FS
Temperature behaviour
Medium temperature -40…+150 °C
Ambient conditions
Ambient temperature -40…+85 °C Storage temperature -40…+85 °C Vibration resistance 20 g, 2…2000 Hz, with amplitude +/-15 mm acc. to
Shock resistance 100 g (11 ms) , acc. to IEC 68-2-27
Housing
Housing material Stainless steel, V2A (1.4305) Pressure connection material Stainless steel A2 1.4305 (AISI 303) Pressure transducer material 1.4305 (AISI 303) Sealing material FPM Process connection NPT ¼”-18 male thread Wrench size pressure connection / coupling nut SW 21 Electrical connection Connector, M12 × 1 Max. tightening torque housing nut 20 Nm
ð 4 mA
ð 1 kò
IEC 60068-2-6
Edition • 2018-10-09T23:02:16+02:00
1 / 2 TURCK Inc.
Pressure Transmitter with current output (2-wire) PT510-7500PSIG-13-LI3-H1131
Reference conditions acc. to IEC 61298-1
Temperature 15…+25 °C Atmospheric pressure 860…1060 hPa abs. Humidity 45…75 % rel. Auxiliary power 24 VDC
Edition • 2018-10-09T23:02:16+02:00
2 / 2 TURCK Inc.
Loading...