Turck PT150PSIG-2003-I2-H1143 Data Sheet

Pressure Transmitter
With Current Output (2-wire)
PT150PSIG-2003-I2-H1143

Type designation PT150PSIG-2003-I2-H1143

Ident-No. 100001276

Pressure range

Relative pressure 0…10.34 bar rel.
0…150 psi
0…1.03 MPa
Admissible overpressure
Burst pressure
Response time < 2 ms, typ. 1 ms
Long-term stability 0.25% FS, according to IEC EN 60770-1

Power supply

Operating voltage 7…33 VDC
Current consumption
Short-circuit/reverse polarity protection yes / yes
Protection type and class IP67 / III
Insulation voltage 750 VDC

ð 41.37 bar
ï 82.74 bar

ð 23 mA

■ Fully welded metal measuring cell

■ Pressure range 0…150 psi rel.

■ 7…33 VDC

■ Analog output 4…20 mA

■ Process connection 1/4"-18 NPT male

thread

■ Plug-in device, M12 × 1

Wiring Diagram

Functional principle

The pressure sensors of the PT…-2000 series
operate with a fully welded metal measuring
cell. Depending on the sensor variant, the pro­cessed signal is available as an analog output
signal of either (4…20 mA (2-wire) or 0…10 V,
0…5 V, 1…6 V (3-wire).

Outputs

Output 1 Analog output

Analog output

Current output 4…20 mA
Operating range 4…20 mA (2-wire)
Load
Accuracy LHR analog output ± 0.3 % FS BSL

Temperature behaviour

Medium temperature -40…+135 °C
Temperature coefficient ± 0.2 % of full scale/10 K

Ambient conditions

Ambient temperature -30…+85 °C
Storage temperature -50…+100 °C
Vibration resistance 20 g, 15…2000 Hz, 15…25 Hz with amplitude +/-15

Shock resistance 100 g, 11 ms, half sinusoidal curve, all 6 directions,

Housing

Housing material Stainless-steel/Plastic, 1.4404 (316L)/ Polyary-

Pressure connection material Stainless steel 1.4404 (AISI 316L)
Pressure transducer material Stainless steel 1.4016 / AISI 430
Process connection NPT ¼”-18 male thread
Wrench size pressure connection / coupling nut 24
Electrical connection Connector, M12 × 1
Max. tightening torque housing nut 20 Nm

Edition • 2018-10-11T21:51:53+02:00

1 / 2 TURCK Inc.

ð (Supply voltage -7)/20 kò

mm acc. to IEC 68-2-6

free fall from 1 m onto concrete (6x) , acc. to IEC
68-2-27

lamide 50 % GF UL 94 V-0

Pressure Transmitter
With Current Output (2-wire)
PT150PSIG-2003-I2-H1143

Reference conditions acc. to IEC 61298-1

Temperature 15…+25 °C
Atmospheric pressure 860…1060 hPa abs.
Humidity 45…75 % rel.
Auxiliary power 24 VDC

MTTF 1189 years acc. to SN 29500 (Ed. 99) 40 °C

Edition • 2018-10-11T21:51:53+02:00

2 / 2 TURCK Inc.