Turck NI4U-Q8SE-AP6X-0.2-PSG3 Data Sheet

Inductive sensor NI4U-Q8SE-AP6X-0.2-PSG3
Type designation NI4U-Q8SE-AP6X-0.2-PSG3
Ident-No. 46358900
Rated switching distance Sn 4 mm Mounting conditions Non-flush, flush mountable Secured operating distance Repeat accuracy Temperature drift
Hysteresis 3…15 % Ambient temperature -30…+85 °C
Operating voltage 10…30 VDC Residual ripple DC rated operational current No-load current I Residual current Isolation test voltage Short-circuit protection yes/ Cyclic Voltage drop at I Wire breakage/Reverse polarity protection yes/ Complete Output function 3-wire, NO contact, PNP Protection class Switching frequency 1 kHz
0
e
ð (0,81 x Sn) mm ð 2 % of full scale ð ± 10 % ð ± 15 %, ð -25 °C v ï +70 °C
ð 10 % U
ss
ð 150 mA ð 15 mA ð 0.1 mA ð 0.5 kV
ð 1.8 V
÷
Rectangular, height 8 mm
Active face on top
Factor 1 for all metals
Increased switching distance
Protection class IP68
Resistant to magnetic fields
Auto-compensation protects against
pre-attenuation
Flush mounted installation on up to 4
sides
DC 3-wire, 10…30 VDC
NO contact, PNP output
Pigtail with male end M8 x 1
Wiring Diagram
Functional principle
Inductive sensors detect metal objects con­tactless and wear-free. Due to the patented multi-coil system, uprox®+ sensors have dis­tinct advantages over conventional sensors. They excel in largest switching distances, maximum flexibility and operational reliability as well as efficient standardization.
Design Rectangular,Q8SE Dimensions 40 x 8 x 8 mm Housing material Plastic, PP, Yellow Material coupling nut metal, CuZn, nickel-plated Tightening torque Electrical connection Cable with connector, Ø 8 mm Cable quality 3mm, Gray, Lif9Y-11Y, PUR, 0.2
Cable cross section
Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP68 MTTF 874 years acc. to SN 29500 (Ed. 99) 40 °C
Switching state LED,Yellow
Edition • 2018-10-22T16:53:00+02:00
1 / 2 TURCK Inc.
ð 0.6 Nm
Suited for E-ChainSystems® acc. to manufacturers declaration H1063M
3 x 0.14 mm
2
Inductive sensor NI4U-Q8SE-AP6X-0.2-PSG3
Distance D 24 mm
Distance W 12 mm
Distance S 12 mm
Distance G 24 mm
Width active area B 8 mm
Flush mounting on 4 sides
1-side mounting:
Sr = 3.5 mm
2-side mounting:
Sr = 3,0 mm
3-side mounting:
Sr = 2,5 mm
4-side mounting:
Sr = 2,0 mm
Edition • 2018-10-22T16:53:00+02:00
2 / 2 TURCK Inc.
Loading...