turck LTX Series, LTX-R10 Series, LTX-EF10 Series, LTX-ER10 Series, LTX-F10 Series Operating Instructions Manual

Your Global Automation Partner

Operating instructions

LTX

Linear Position Sensors
with SSI Interface

2

Hans Turck GmbH & Co. KG | T [phone] | F [phone] | [e-mail] | www.turck.com

Contents

3

2017/09

1 About these Instructions 5

1.1 Target Groups 5

1.2 Explanation of Symbols 5

1.3 Other Documents 5

1.4 Feedback on these Instructions 5

2 Notes on the Product 6

2.1 Product Identication 6

2.2 Scope of Delivery 6

2.3 Legal Requirements 7

2.4 Manufacturer and Service 7

3 For Your Safety 7

3.1 Intended Use 7

3.2 General Safety Instructions 7

4 Product Description 8

4.1 Device Overview 8

4.1.1 Display Elements 8

4.2 Properties and Characteristics 9

4.3 Functional Principle 9

4.4 Functions and Operating Modes 9

4.4.1 Automatic Signal Control 10

4.4.2 Update Mode 10

4.4.3 Measuring Functions 11

4.4.4 Preferred Type LTX…M-F10-SSI2-GAF1-X3-H1161 – Measuring Range 11

4.5 Technical Accessories 12

5 Mounting 14

5.1 Mounting the Device in a Hydraulic Cylinder 15

5.1.1 Mounting the Sensor 15

5.2 Fastening the Device Externally with Mounting Bracket 16

5.2.1 Mounting Additional Mounting Elements (for External Mounting) 17

5.2.2 Mounting Positioning Elements (for External Mounting) 17

6 Connection 18

6.1 Wiring Diagram 18

7 Commissioning 18

8 Operation 19

8.1 LED Display 19

9 Eliminating Interference 20

9.1 Replacing the Sensor Head and Measuring Element 20

10 Maintenance 20

11 Repair 20

11.1 Returning Devices 20

12 Disposal 20

13 Technical Data 21

13.1 Update Time 21

Contents

4

Hans Turck GmbH & Co. KG | T [phone] | F [phone] | [e-mail] | www.turck.com

5

2017/09

1 About these Instructions

These operating instructions describe the structure, functions and the use of the product, and
will help you to operate the product as intended. Read these instructions carefully before us­ing the product. This is to avoid possible personal injury, or damage to property or the device.
Retain these instructions for future use during the service life of the product. If the product is
passed on, pass on these instructions as well.

1.1 Target Groups

These instructions are aimed at qualified personnel and must be carefully read by anyone
mounting, commissioning, operating, maintaining, dismantling or disposing of the device.

1.2 Explanation of Symbols

The following symbols are used in these instructions:

DANGER

DANGER indicates an imminently hazardous situation with a high risk of death or seri­ous injury if it is not prevented.

WARNING

WARNING indicates a potentially hazardous situation with a moderate risk of death or
severe injury if not prevented.

CAUTION

CAUTION indicates a situation that may result in damage to property if it is not
prevented.

NOTE

NOTE indicates tips, recommendations and important information. The notes make
work easier, contain information on specific action steps and help prevent unnecessary
work due to incorrect processes.



CALL TO ACTION

This symbol identifies steps that the user has to perform.



ACTION RESULT

This symbol identifies relevant results of actions and action sequences.

1.3 Other Documents

Besides this document, the following material can be found on the internet at www.turck.com:

■

Data sheet

1.4 Feedback on these Instructions

We are committed to always keeping these instructions as informative and as clear as possible.
If you have any suggestions for improving the design or if some information is missing in the
document, please send your suggestions to [e-mail].

6

Hans Turck GmbH & Co. KG | T [phone] | F [phone] | [e-mail] | www.turck.com

Notes on the Product

2 Notes on the Product

2.1 Product Identication

NOTE

■

Designs with manufacturer compatible connectors and models with enlarged blind
zones are available on request.

■

Device LTX…M-F10-SSI2-GAF1-X3-H1161 is the preferred type.

2.2 Scope of Delivery

Included in the scope of delivery:

■

Linear position sensor (without positioning element)

■

Quick start guide

LTX 100 M

Magnetostrictive
position sensor

–

Unit

M Millimeter

Measuring range

100 from 25 to 7500 mm

Operating principle

LTX Linear position sensor

LTX 100 M – F10 – SSI 2 – G A F 1 – X3 – H1 1 6 1

F10

Design

–

Design
F10 Flat face, rod Ø 10.3 mm,

aluminum*

R10 Raised face, rod Ø 10.3 mm,

aluminum

EF10 Flat face, rod Ø 10.3 mm,

stainless steel

ER10 Raised face, rod Ø 10.3 mm,

stainless steel

SSI 2 – G A F 1 – X3

Electrical version

–

Number of LEDs
X3 3-color LED

Resolution
1 0.005 mm*
2 0.01 mm
3 0.05 mm
4 0.1 mm
5 0.02 mm
6 0.002 mm
7 0.001 mm

Direction
F forward*
R backward
V velocity

Data type
S synchronous
A asynchronous*

Data format
B binary
G gray*

Data length
1 24 bit
2 25 bit*
3 26 bit

Data mode

H1161

Electrical connection:
Male

Assignment
1 Standard assignment

Number of contacts
6 6-pin

Connector type
1 straight

Connector type

H1 Male connector M12 x 1

* Preference type

7

2017/09

2.3 Legal Requirements

The device is subject to the following EU directives:

■

2014/30/EU (electromagnetic compatibility)

■

2011/65/EU (RoHS 2)

2.4 Manufacturer and Service

Turck supports you with your projects, from initial analysis to the commissioning of your ap­plication. The Turck product database contains software tools for programming, configuration
or commissioning, data sheets and CAD files in numerous export formats. You can access the
product database at the following address: http://www.turck.de/products/
Should you have any further questions, please contact the sales and service team in Germany
on the following telephone numbers:
Sales: [phone]
Technology: [phone]

Outside Germany, please contact your Turck representative.

Hans Turck GmbH & Co. KG
Witzlebenstraße 7
45472 Mülheim an der Ruhr
Germany

3 For Your Safety

The product is designed to the latest standards. However, residual risks still exist. Observe the
following warnings and safety information to prevent personal injury or damage to property.
Turck accepts no liability for damage caused by failure to observe these warning and safety
instructions.

3.1 Intended Use

These devices are designed solely for use in industrial areas.
The magnetostrictive linear position sensors are used for contactless and wear-free linear
position detection. The devices are suitable for use in hydraulic cylinders. The devices can also
be used for level measurement through the use of float magnets (optionally available). The
measuring range is adjustable.
The devices must only be used as described in these instructions. Any other usage shall be con­sidered improper and Turck shall not be held liable for any resulting damage.

3.2 General Safety Instructions

■

The devices are not safety components and may not be used for personal or property
protection.

■

The device must only be fitted, installed, operated, parameterized and maintained by trained
and qualified personnel.

■

The device only meets the EMC requirements for industrial areas and is not suitable for use in
residential areas.