Inductive Barrel Sensor Part Number Key
B I 10 U - G T 30 - A DZ 30 X2 Wiring Option* Special Option Code**
Mounting
B = embeddable
N = nonembeddable
Principle of Operation
I = inductive
Rated Operating Distance (mm)
Sensing Characteristics
U = Uprox® sensor
Housing Material Modier
E = stainless steel
Housing Style
Barrel - Metal
G = full threading, generally chrome plated brass
GS = threaded side sensor
H = smooth, chrome plated brass or stainless steel
HS = smooth side sensor
M = partial threading, chrome plated brass
Barrel - Plastic
K = smooth
P = full threading
S = partial threading
SK = side sensing/slot sensor, plastic housing
Primary Barrel Modier
T = PTFE coated
Housing Diameter or Height (mm)
Secondary Barrel Modier
CA = conduit adaptor
E = extended barrel length
EE = extra long barrel length
F = stainless steel face
FE = stainless steel face, extended barrel length
We reserve the right to make technical alterations without prior notice.
H = Stoneface®
K = shor t barrel length
M = medium barrel length
S = side sensing
SE = extended length
SK = right-angle terminal chamber
SR = straight terminal chamber
T = barb tting at cable entry
TC = terminal chamber
WD = washdown IP68/IP69K
Number of LEDs
(blank) = no LEDs
X = 1 LED
X2 = 2 LEDs
Voltage Range
AC/DC: (No SCP**)
3 = 20-250 VAC, 10-300 VDC
14 = 20-132 VAC, 10-140 VDC
31 = 20-250 VAC, 10-300 VDC, plastic barrel
33 = 35-250 VAC, grounded metal barrel
AC/DC: (Latched SCP)
30 = 20-250 VAC, 10-300 VDC
32 = 20-250 VAC, 10-300 VDC
40 = 20-140 VAC/DC, high o-state current
DC:
4 = 10-65 VDC, polarity protected, pulsed SCP**
6 = 10-30 VDC, polarity protected, pulsed SCP
7 = 10-30 VDC, TTL compatible
8 = 20-30 VDC, polarity protected, pulsed SCP
41 = 10-55 VDC, polarity protected, pulsed SCP
44 = 10-55 VDC
45 = 8.4-64 Volts
**SCP = short-circuit and overload protection
Output
D = 2-wire DC (transistor output)
DZ = 2-wire AC/DC, (power MOSFET output)
G = 2-wire DC, low voltage drop
N = NPN transistor (current sinking)
P = PNP transistor (current sourcing)
Z = 2-wire AC or 2-wire AC/DC
Output Function
A = normally open (N.O.)
DA = dynamic output (ring sensor), normally open
F = connection programmable (N.O or N.C.)
R = normally closed (N.C.)
V = complementary outputs: one N.O., one N.C.
Y0 = NAMUR output, requires switching amplier
Y1 = NAMUR output, requires switching amplier, ATEX Approved
NOTE:
Part number keys are to assist in identication only.
Verify new part numbers with factory; some congurations are not possible.
Inductive Barrel Sensors
Turck Inc.
B4
Inductive Barrel Sensor Part Number Key
Wiring Options*
A. Connectorized Sensor
Bi2-M12-AN6X - H1 1 4 1
Connector Family
B1 = Minifast®, 7/8”-16UN, metal, male
B2 = Minifast®, 7/8”-16UN, plastic, male
B3 = Microfast®, 1/2”-20UNF, metal, male
H1 = Eurofast®, M12x1, metal or plastic, male
V1 = Picofast®, snap and M8x1, metal, male (Q08 snap only)
V2 = Picofast®, snap and M8x1, male (Q08 only)
Connector/Sensor Transition
1 = straight
3 = straight with adapter
4 = right-angle with adapter
Factory Code
Example:
0 = non-standard wiring
1 = standard wiring
3 = N.C. DC output on pin 4
4 = N.O. 2-wire DC output on pin 4
Number of Pins
B. Potted Cable
Cable Length
(blank) = 2 meter cable
7M = 7 meter cable
*M = custom cable lengths available
C. Potted Cable with Molded Connector
Bi2-G12-Y0X - 0.2M - RS 4.21T
Cable Length
examples:
0.2M = 0.2 meters (minimum)
2M = 2 meter cable
7M = 7 meter cable
Option Codes for Special or Custom-Built Sensors**
Bi 2-S12-AN7X /S100 or Bi10-M30-AN6X-H1141 /F2
Bi2-G12-AN6X 7M
We reserve the right to make technical alterations without prior notice.
Standard Cordset Connector
AC: RSM 30 = Minifast, 7/8”-16UN, metal, male, 3-conductor
SB 3T = Microfast, 1/2”-20UNF, metal , male, 30 conductor
DC: RS 4T = Eurofast, M12x1, metal or plastic, male, 3-conductor
RS 4.2T = Eurofast, M12x1, metal or plastic, male, 2-conductor
RS 4.21T = Eurofast, M12x1, metal or plastic, male, NAMUR, 2-conductor
RS 4.4T = Eurofast, M12x1, metal or plastic, male, 4-conductor
RSM 40 = Minifast, 7/8”-16UN, metal, male, 4-conductor
PSG 3 = Picofast, snap, plastic, male, 3-conductor
PSG 3M = Picofast, M8x1, male, 3-conductor
examples:
/S34 = weld eld immune
/S90 = TPU cable
/S97 = -40 °C (-40 °F) operating temperature
/S100 = +100 °C (+212 °F) operating temperature
/S1589 = barrel sensors with Weldguard® laminate
/S1610 = barrel sensors with tool steel sleeve and Weldguard® laminate
B5
Turck Inc.
example:
/F2 = alternate oscillator frequency
Loading...