Turck FM-IM-3UP63X Technical data

FM-IM-3UP63X
Flow Monitoring – For the Connection of Flow Sensors
IO-Link Device with Transistor Outputs

Features

Transistor outputs for flow, temperature and

■

faults
Adjustment of switchpoint, no teaching of

■

flow boundaries (QuickTeach)
LED band for indication of flow speed and

■

media temperature
Monitoring of operating and display range

■

Detection of wire-break and short-circuit on

■

the sensor side
Standard IO or IO-Link operating mode

■

Parametrized via pushbutton or soft-

■

ware-supported via IO-Link

Functional principle

Technical data

Type FM-IM-3UP63X

ID no. 7525100

Electrical data

Operating voltage 20…30VDC

Power consumption <4.5W

No-load current I

0

Teach modes QuickTeach; min/max adjustment. Teach

Flow speed [%] after min/max adjustment (perma-

Flow speed % after Quick-Teach (permanent)

Medium temperature [°C] with the SET button temporarily

Repeatability flow rate typical ±1% (of full scale)

Repeatability media temperature typical ±1K

Measuring accuracy media temperature typical ±7K

Switchpoint hysteresis media tempera­ture

Input function Connection of flow sensors

Sensor voltage ≤15VDC

Sensor current ≤35mA

Sensor current limitation approx.110mA

Measuring frequency 5 Hz (every 200 ms with software filter)

Output functions

Flow monitoring transistor output



≤63mA

modes incl. DeltaFlow monitoring (teach
modes are automatically released with
the change of flow speed).

nent)

pressed

2K



All non-Ex flow sensors from the FCS series
(immersion sensors) and FCI series (inline
series) can be operated with the FM-IM
external processing unit.



The flow module features four status LEDs
as well as a 10-segment LED band for local
monitoring. Software-based diagnostic options
are also available to the user, such as wire­break and short-circuit on the sensor side.
Furthermore, monitoring of flow rates and
media temperatures within a predefined
operating and display range.



The upper and lower limits of the flow range
are taught in using the max./min. teach
mode implemented. The flow switchpoint is
easily adjusted by means of the Quick-Teach
function, without having to program a lower
and upper limit of the flow range. Working
on the calorimetric principle, the connectible
sensors not only detect the flow rate but also
the media temperature.



The flow module can be operated either in
IO-Link (IOL) or in standard IO (SIO) mode
via the integrated IO-Link interface. In SIO
mode, the switching outputs are operated in
the standard way. In IOL mode the current
process signal is transmitted cyclically as a 10
bit-serial value.



Parametrization is initiated either via
pushbutton or software-supported via IO­Link interface. The actual parametrization is
then implemented via the tool-based DTM or
IODD within the FDT frame PACTware™ or
acyclically near the control via On-Request
Data Objects (ORDO).



FM-IM-3UP63X | 04-05-2021 11-33 | Technical modifications reserved

Hans Turck GmbH & Co. KG | 45466 Mülheim an der Ruhr, Germany | T [phone] | F [phone] | [e-mail] | www.turck.com 1|3

Technical data

Temperature monitoring transistor output

Error monitoring transistor output

Switching characteristic PNP

Switching state active high / active low parametrizable

(transistor output error monitoring only
active low)

Switching voltage 20…30VDC

Switching current 100mA

Electrical connections 5-pole removable reverse polarity protect-

ed terminal blocks

Connection mode screw connection

Terminal cross-section 1.5…2.5mm²

IO-Link

Communication IO-Link spec. 1.0

Transmission rate 38.4 kbps (COM 2)

Transmission physics Transmission physics 3-wire physics

Communication channel Clamp 12 and via front panel jack COM

Communication modes Tool based engineering via FDT / DTM,

Included in the SIDI GSDML Yes

Tests/approvals

Approvals CE, C-UL U.S. submitted

Electromagnetic compatibility (EMC) acc. to NE21

Relative humidity EN 60068-2-38

Mechanical data

Design Signal processor

Dimensions 89x110x27mm

Housing material Polycarbonate/ABS

Ambient temperature (min.) -25

Ambient temperature (max.) 70

Mounting type DIN rail mounting and mounting panel

Protection class IP20

MTBF 109Years



(PHY 2)

(PC)

IODD. Acyclic communication via On-Re­quest Data Objects





Hans Turck GmbH & Co. KG | 45466 Mülheim an der Ruhr, Germany | T [phone] | F [phone] | [e-mail] | www.turck.com 2|3

FM-IM-3UP63X | 04-05-2021 11-33 | Technical modifications reserved