Turck CDN2-IOM22-0012 Data Sheet
CDN2-IOM22-0012
• Advanced DeviceNet™ station
•
Two discrete inputs and two discrete outputs
CDN2-IOM22-0012
This busstop®station is designed to replace the
equivalent CDN station. The PLC will not need to be
reconfigured.
Note: There is no EDS file available for this station.
Each input connector provides V+, V-, and input. The
V+ provides power to the attached sensor. The V+ is
short-circuit protected and monitered as a group. The
input will work with a PNP sensor or dry contact to V+.
Each output connector provides Aux- and output.
Outputs are individually short-circuit protected and
monitored individually.
The node address can be set using the rotary switches
located under the device cover or through software node
commissioning. The unit automatically detects the
communication rate.
The CDN2-IOM22-0012 supports explicit messaging,
poll, change of state, and cyclic I/O messages. These
connections are established through UCMM or
predefined master/slave connection set.
Dimensions
Applications
•
For wet and dry environments
•
For use with four 3-wire proximity and
photoelectric sensors, and four discrete
actuators
Features
•
PNP short-circuit protected inputs
•
0.5 amp short-circuit protected outputs
•
Rotary Address Switches
Connectors
DeviceNet
Style: 5-pin minifast
Cordset: Bus Line use RSC RKC 572-*M
Tee: Bus Line use RSC 2RKC 57
®
1 = Shield
2 = V+
3 = V4 = CAN_H
5 = CAN_I
Male Female
Through Bus
TURCK Inc. 10240357 Rev 1.0 05/05
TURCK
CDN2-IOM22-0012
Connectors
Style: 5-pin eurofast
Cordset: Single Sensor use RK 4.4T-*-RS 4.4T
®
1 = V+
2 = Alarm
3 = V4 = Input
5 = PE
Type "G"
Style: 5-pin eurofast
Single Sensor
1 = N/C
2 = N/C
3 = GND
®
4 = Output
5 = N/C
Splitter & 2 Sensors
Cordset: Single Sensor use RK 4.4T-*-RS 4.4T
Field Wireable: Single Output use BS 8141-0
Aux Power
Style: 4-pin minifast
®
1 = Aux+
2 = E+
3 = E4 = Aux-
Single Output
Cordset: Aux Power use RSM RKM 46-*M
Tee: Bus Line use RSM 2RKM 57
Male Female
Auxiliary Power
I/O Data Mapping Vendor Code: 48 Product Code: 193
Input
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Data
0 - IGS - IGS A-1 I-1 A-0 I-0
1 - - - - - - OS-1 OS-0
Byte Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
Output
Data
0 - - - - - - O-1 O-0
Abbreviations
I = Input Data (0= OFF, 1= ON) O = Output Data (0=OFF, 1=ON)
ISS = Input Short Status (0=Working, 1=Fault) OS = Output Status (0=Working, 1=Fault)
IOS = Input Open Status (0=Working, 1=Fault) OGS = Output Group Status (0=Working, 1=Fault)
TURCK Inc. 10240357 Rev 1.0 05/05
Loading...