Magnetic Field Sensor
for pneumatic cylinders
BIM-PST-AP6X/KLP80 7M
Type designation BIM-PST-AP6X/KLP80 7M
Ident-No. 4624097
■ Rectangular, height 16 mm
■ Active face in front
■ Plastic, PA12-GF30
■ Magnetic-inductive sensor
■ DC 3-wire, 10…30 VDC
■ NO contact, PNP output
■ Cable connection
Wiring Diagram
Repeatability
Temperature drift
Hysteresis
Ambient temperature -25…+70 °C
Operating voltage 10…30 VDC
Residual ripple
DC rated operational current
No-load current I
Residual current
Isolation test voltage
Short-circuit protection yes/ Cyclic
Voltage drop at I
Wire breakage/Reverse polarity protection yes/ Complete
Output function 3-wire, NO contact, PNP
Design Rectangular,PST
Dimensions 23 x 14 x 16 mm
Housing material Plastic, PA12-GF30
Active area material Plastic, PA12-GF30
Electrical connection Cable
Cable quality 4mm, Gray, LifYY, PVC, 2
Cable cross section
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP67
MTTF 2283 years acc. to SN 29500 (Ed. 99) 40 °C
Mounting on the following profiles .
Cylindrical design
0
e
ð ± 0.1 mm
ð 0.1 mm
ð 1 mm
ð 10 % U
ss
ð 200 mA
ð 15 mA
ð 0.1 mA
ð 0.5 kV
ð 1.8 V
3 x 0.25 mm
E
2
Functional principle
Magnetic field sensors are activated by magnetic fields and are especially suited for piston position detection in pneumatic cylinders.
Based on the fact that magnetic fields can
permeate non-magnetizable metals, it is possible to detect a permanent magnet attached
to the piston through the aluminium wall of the
cylinder.
Switching state LED,Yellow
Included in delivery KLP25
Edition • 2018-03-28T18:38:21+02:00
1 / 2 TURCK Inc.
Magnetic Field Sensor
for pneumatic cylinders
BIM-PST-AP6X/KLP80 7M
Accessories
Type code Ident-No. Description
KLP 25 69653
Mounting on E cylinders; cylinder diameter 8…25 mm (ma-
terial: Metal CuZn), 2 tie bolts (material: Metal CuZn), cylin-
der screw M3 x 20
KLP 80-VA 69654
KLP 200-VA 6965302
Mounting on E cylinders; cylinder diameter 25…80 mm
(material: Metal A2 1.4301 (AISI 304), 2 tie bolts (material:
Metal CuZn, alternatively metal A2 1.4301 / AISI 304) cylin-
der screw M3 x 20; (DIN 912-A20)
Mounting on E cylinders; cylinder diameter 80…200 mm
(material: Metal A2 1.4301 (AISI 304), 2 tie bolts (material:
Metal CuZn, alternatively metal A2 1.4301 / AISI 304) cylin-
der screw M3 x 20; (DIN 912-A20)
Edition • 2018-03-28T18:38:21+02:00
2 / 2 TURCK Inc.
Loading...