Turck BIM-M12-Y0/S300 Data Sheet

Magnetic Field Sensor
with extended temperature range
BIM-M12-Y0/S300

Type designation BIM-M12-Y0/S300

Ident-No. 1070021

Rated switching distance Sn 90 mm
Repeat accuracy
Temperature drift
Hysteresis 1…10 %
Ambient temperature -25…+130 °C

Output function 2-wire, NAMUR
Switching frequency 1 kHz
Voltage Nom. 8.2 VDC
Current consumption non-actuated
Actuated current consumption

Design Threaded barrel,M12 × 1
Dimensions 64 mm
Housing material Metal, CuZn, Chrome-plated
Active area material Plastic, PBT-GF30
End cap Metal, CuZn
Max. tightening torque housing nut 10 Nm
Electrical connection Cable
Cable quality 5.2mm, SiHSi, Silicone, 2
Cable cross section

Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP67

ð 0.3 % of full scale
ð ± 15 %

ð 1.2 mA
ï 2.1 mA

2 x 0.5 mm

2

■ Threaded barrel, M12 x 1

■ Chrome-plated brass

■ For temperatures up to 130 °C

■ Up to 3000 temperature cycles

■ Magnetic-inductive proximity sensor

■ Rated operating distance 90 mm with

DMR31-15-5 magnet

■ DC 2-wire, nom. 8.2 VDC

■ Output acc. to DIN EN 60947-5-6 (NA-

MUR)

■ Cable connection

Wiring Diagram

Functional principle

Magnetic inductive proximity sensors are ac­tuated by magnetic fields and are thus capa­ble of detecting permanent magnets through
non-ferromagnetic materials (e.g. wood, plas­tic, non-ferrous metals, aluminium, stainless
steel).

Thus it is possible to achieve large switching
distances even with smaller housing styles.
In combination with the actuation magnet
DMR31-15-5 TURCK sensors of the series
M12 feature a nominal switching distance of
90 mm. Thus there are multiple detection pos­sibilities, particularly if mounting space is limit­ed or other difficult sensing conditions prevail.

Edition • 2018-03-28T18:10:07+02:00

1 / 3 TURCK Inc.

Magnetic Field Sensor
with extended temperature range
BIM-M12-Y0/S300

Diameter active area B Ø 12 mm

Edition • 2018-03-28T18:10:07+02:00

2 / 3 TURCK Inc.

Magnetic Field Sensor
with extended temperature range
BIM-M12-Y0/S300

Accessories

Type code Ident-No. Description

IMX12-DI01-2S-2T-0/

24VDC

DMR15-6-3 6900216 Actuation magnet, Ø 15 mm (Ø 3 mm), h: 6 mm; sensing

7580020 Isolating switching amplifier, 2-channel; SIL2 acc. to IEC

61508; Ex-proof version; 2 transistor outputs; input Namur

signal; ON/OFF switchable monitoring of wire-break and

short-circuit; toggle between NO/NC mode; signal doubling;

removable screw terminals; 12.5 mm wide; 24 VDC power

supply

range 36 mm on BIM-(E)M12 sensors resp. 32 mm on BIM-

EG08 sensors; in combination with Q25L: Recommended

distance between sensor and magnet: 3 … 4 mm

DMR20-10-4 6900214 Actuation magnet; Ø 20 mm (Ø 4 mm), h: 10 mm; sensing

range 59 mm on BIM-(E)M12 sensors resp. 50 mm on BIM-

EG08 sensors; in combination with Q25L: Recommended

distance between sensor and magnet: 3 … 4 mm

DMR31-15-5 6900215 Actuation magnet, Ø 31 mm (Ø 5 mm), h: 15 mm; sensing

range 90 mm on BIM-(E)M12 sensors resp. 78 mm on BIM-

EG08 sensors; in combination with Q25L: Recommended

distance between sensor and magnet: 3 … 5 mm

MW-12 6945003 Mounting bracket for threaded barrel devices; material: Stain-

less steel A2 1.4301 (AISI 304)

Edition • 2018-03-28T18:10:07+02:00

3 / 3 TURCK Inc.