Turck BIM-M12E-AG4X-H1144 Data Sheet

Magnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-M12E-AG4X-H1144
Type designation BIM-M12E-AG4X-H1144
Ident-No. 1579910
Rated switching distance Sn 90 mm
Operating voltage 10…65 VDC DC rated operational current Residual current Isolation test voltage Short-circuit protection yes/ Cyclic Voltage drop at I Wire breakage/Reverse polarity protection no/ Polarized Output function 2-wire, NO contact, 2-wire Smallest operating current I Switching frequency 0.3 kHz
Design Threaded barrel,M12 × 1 Dimensions 62 mm Housing material Metal, CuZn, Chrome-plated Active area material Plastic, PBT-GF30 Max. tightening torque housing nut 10 Nm Electrical connection Connector, M12 × 1 Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP67 MTTF 2283 years acc. to SN 29500 (Ed. 99) 40 °C
e
m
ð 0.3 % of full scale
ð ± 15 %
ð 200 mA
ð 0.8 mA
ð 0.5 kV
ð 4.2 V
ï 3 mA
Threaded barrel, M12 x 1
Chrome-plated brass
Rated operating distance 90 mm with
DMR31-15-5 magnet
DC 2-wire, 10…65 VDC
Polarized version
NO contact
Male connector M12 x 1
Wiring Diagram
Functional principle
Magnetic inductive proximity sensors are ac­tuated by magnetic fields and are thus capa­ble of detecting permanent magnets through non-ferromagnetic materials (e.g. wood, plas­tic, non-ferrous metals, aluminium, stainless steel).
Thus it is possible to achieve large switching distances even with smaller housing styles. In combination with the actuation magnet DMR31-15-5 TURCK sensors feature a rela­tively high switching distance. Thus there are multiple detection possibilities, particularly if the mounting space is limited or other difficult sensing conditions prevail.
Switching state LED,Yellow
Edition • 2018-03-28T20:46:38+02:00
1 / 4 TURCK Inc.
Magnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-M12E-AG4X-H1144
Diameter active area B Ø 12 mm
Edition • 2018-03-28T20:46:38+02:00
2 / 4 TURCK Inc.
Magnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-M12E-AG4X-H1144
Accessories
Type code Ident-No. Description
DMR20-10-4 6900214 Actuation magnet; Ø 20 mm (Ø 4 mm), h: 10 mm; sensing
range 59 mm on BIM-(E)M12 sensors resp. 50 mm on BIM-
EG08 sensors; in combination with Q25L: Recommended
distance between sensor and magnet: 3 … 4 mm
DMR31-15-5 6900215 Actuation magnet, Ø 31 mm (Ø 5 mm), h: 15 mm; sensing
range 90 mm on BIM-(E)M12 sensors resp. 78 mm on BIM-
EG08 sensors; in combination with Q25L: Recommended
distance between sensor and magnet: 3 … 5 mm
DMR15-6-3 6900216 Actuation magnet, Ø 15 mm (Ø 3 mm), h: 6 mm; sensing
range 36 mm on BIM-(E)M12 sensors resp. 32 mm on BIM-
EG08 sensors; in combination with Q25L: Recommended
distance between sensor and magnet: 3 … 4 mm
DM-Q12 6900367 Actuation magnet; rectangular, plastic; attainable switching
distance 58 mm on BIM-(E)M12 sensors resp. 49 mm on
BIM-EG08 sensors; in combination with Q25L linear position
sensors: recommended distance between the sensor and
magnet: 3…5 mm
BSS-12 6901321 Mounting bracket for smooth and threaded barrel devices;
material: Polypropylene
Edition • 2018-03-28T20:46:38+02:00
3 / 4 TURCK Inc.
Magnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-M12E-AG4X-H1144
Accessories
Type code Ident-No. Description
MW-12 6945003 Mounting bracket for threaded barrel devices; material: Stain-
less steel A2 1.4301 (AISI 304)
Edition • 2018-03-28T20:46:38+02:00
4 / 4 TURCK Inc.
Loading...