Magnetic Field Sensor
for pneumatic cylinders (magnetic-field immune)
BIM-IKM-AD4X-H1144/S34
Type designation BIM-IKM-AD4X-H1144/S34
Ident-No. 4484001
■ Rectangular, height 34 mm
■ Metal, GD-Zn
■ Magnetic-inductive sensor
■ Weld resistant to AC fields of 50…60 Hz
■ DC 2-wire, 10…65 VDC
■ NO contact
■ Male connector M12 x 1
Wiring Diagram
Pass speed
Repeatability
Temperature drift
Hysteresis
Ambient temperature -25…+70 °C
Operating voltage 10…65 VDC
Residual ripple
DC rated operational current
Residual current
Isolation test voltage
Short-circuit protection yes/ Cyclic
Voltage drop at I
Wire breakage/Reverse polarity protection no/ Complete
Switching frequency 0.015 kHz
Design Rectangular,IKM
Dimensions 34 x 17 x 34 mm
Housing material Metal, GD-Zn
Active area material Plastic, PA12-GF30
Electrical connection Connector, M12 × 1
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP67
MTTF 2283 years acc. to SN 29500 (Ed. 99) 40 °C
Mounting on the following profiles .
Cylindrical design
Power-on indication LED,Green
Switching state LED,Yellow
e
ð 1 m/s
ð ± 0.1 mm
ð 0.1 mm
ð 1 mm
ð 10 % U
ð 100 mA
ð 0.8 mA
ð 0.5 kV
ð 4 V
F G H
ss
Functional principle
Magnetic field sensors are activated by magnetic fields and are used, in particular, for the
detection of the piston position in pneumatic
cylinders. As magnetic fields can permeate
non-magnetizable metals, they detect a permanent magnet attached to the piston through
the aluminium cylinder wall.
Weld-field immune permaprox sensors
"freeze" the switching status when detecting
a magnetic AC field (50…60 Hz). In this way,
false switching operations are prevented during the welding process. When the AC field
disappears, the sensors resume standard operation.
Edition • 2018-03-28T20:47:06+02:00
1 / 4 TURCK Inc.
Magnetic Field Sensor
for pneumatic cylinders (magnetic-field immune)
BIM-IKM-AD4X-H1144/S34
Mounting instructions/Description Active face in front
Edition • 2018-03-28T20:47:06+02:00
2 / 4 TURCK Inc.
Loading...