Turck BIM-EG08-AP6X-V1131 Data Sheet

Magnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-EG08-AP6X-V1131
Type designation BIM-EG08-AP6X-V1131
Ident-No. 4621314
Rated switching distance Sn 78 mm
Operating voltage 10…30 VDC Residual ripple DC rated operational current No-load current I Residual current Isolation test voltage Short-circuit protection yes/ Cyclic Voltage drop at I Wire breakage/Reverse polarity protection yes/ Complete Output function 3-wire, NO contact, PNP Switching frequency 1 kHz
0
e
ð 0.3 % of full scale
ð ± 10 %
ð 10 % U
ss
ð 150 mA
ð 15 mA
ð 0.1 mA
ð 0.5 kV
ð 1.8 V
M8 × 1 threaded barrel
Stainless steel, 1.4427 SO
Rated operating distance 78 mm with
DMR31-15-5 magnet
DC 3-wire, 10…30 VDC
NO contact, PNP output
Male connector, M8 x 1
Wiring Diagram
Functional principle
Magnetic inductive proximity sensors are ac­tuated by magnetic fields and are thus capa­ble of detecting permanent magnets through non-ferromagnetic materials (e.g. wood, plas­tic, non-ferrous metals, aluminium, stainless steel).
Thus it is possible to achieve large switching distances even with smaller housing styles. In combination with the actuation magnet DMR31-15-5 TURCK sensors feature a rela­tively high switching distance. Thus there are multiple detection possibilities, particularly if the mounting space is limited or other difficult sensing conditions prevail.
Design Threaded barrel,M8 × 1 Dimensions 49 mm Housing material Stainless steel, 1.4427 SO Active area material Plastic, PA12-GF30 Max. tightening torque housing nut 5 Nm Electrical connection Connector, M8 × 1 Vibration resistance 55 Hz (1 mm) Shock resistance 30 g (11 ms) Protection class IP67 MTTF 2283 years acc. to SN 29500 (Ed. 99) 40 °C
Switching state LED,Yellow
Edition • Rev. A • 2018-03-26T22:44:49+02:00
1 / 4 TURCK Inc. ñ
Magnetic Field Sensor Magnetic-inductive Proximity Sensor BIM-EG08-AP6X-V1131
Diameter active area B Ø 8 mm
Edition • Rev. A • 2018-03-26T22:44:49+02:00
2 / 4 TURCK Inc.
Loading...
+ 2 hidden pages