Inductive sensor
For high pressures and extended temperature ranges
BID2-G182-AP6/S212-S85 5M
Type designation BID2-G182-AP6/S212-S85 5M
Ident-No. 1688207
■ Threaded barrel, M18 x 1
■ Stainless steel, 1.4305
■ Admissible pressure static/dynamic
500/350 bar
■ Temperatures up to +85 °C
■ DC 3-wire, 10…30 VDC
■ NO contact, PNP output
■ Cable connection
Wiring Diagram
Rated switching distance Sn 2 mm
Mounting conditions Flush
Secured operating distance
Correction factors St37 = 1; Al = 0.3; stainless steel = 0.7; Ms = 0.4
Repeat accuracy
Static pressure
Dynamic pressure
Admissible contact medium electrically non-conductive
Temperature drift
Hysteresis 3…15 %
Ambient temperature -25…+85 °C
Operating voltage 10…30 VDC
Residual ripple
DC rated operational current
No-load current I
Residual current
Isolation test voltage
Short-circuit protection yes/ Cyclic
Voltage drop at I
Wire breakage/Reverse polarity protection yes/ Complete
Output function 3-wire, NO contact, PNP
Switching frequency 2 kHz
Design Threaded barrel,M18 × 1
Dimensions 89.5 mm
Housing material Metal, V2A (1.4305)
Active area material Plastic, PA12-GF30
Max. tightening torque housing nut 25 Nm
Electrical connection Cable
Cable quality 6.3mm, LiÖlflex, Ölflex®, 5
Cable cross section
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP67
0
e
ð (0,81 x Sn) mm
ð 2 % of full scale
ð 500 bar
ð 350 bar
ð ± 10 %
ð ± 20 %, ï +70 °C
ð 10 % U
ss
ð 200 mA
ð 15 mA
ð 0.1 mA
ð 0.5 kV
ð 1.8 V
3 x 0.5 mm
2
Functional principle
Inductive sensors detect metal objects contactless and wear-free. For this purpose they
use a high-frequency electromagnetic AC
field that interacts with the target. The sensors
hosting a ferrite core coil generate the AC field
through an LC resonant circuit.
Pressure resistant inductive sensors withstand pressures of up to 500 bar which makes
them perfectly suited for position control in hydraulic cylinders.
Edition • 2018-04-23T15:46:57+02:00
1 / 3 TURCK Inc.
Inductive sensor
For high pressures and extended temperature ranges
BID2-G182-AP6/S212-S85 5M
Distance D 2 x B
Distance W 3 x Sn
Distance T 3 x B
Distance S 1.5 x B
Distance G 6 x Sn
Diameter active area B Ø 18 mm
sensor head must be circulated by oil during set-up.
■
Edition • 2018-04-23T15:46:57+02:00
2 / 3 TURCK Inc.