Turck BI8-M18-LI-EXI-H1141 Data Sheet
Inductive sensor
With analog output
BI8-M18-LI-EXI-H1141
Type designation BI8-M18-LI-EXI-H1141
Ident-No. 1535604
Measuring range [A…B] 1…5 mm
Mounting conditions Flush
Correction factors St37 = 1; Al = 0.3; stainless steel = 0.7; Ms = 0.4
Repeatability
Linearity deviation
Temperature drift
Temperature drift
Ambient temperature -25…+70 °C
Operating voltage 14…30 VDC
Residual ripple
Isolation test voltage
Short-circuit protection yes
Wire breakage/Reverse polarity protection no/ Complete
Output function 2-wire, Analog output
Current output 4…20 mA
Load resistance current output
Measuring sequence frequency 200 Hz
ð 1 % of measuring range |A - B|
ð 0.5 %, after warm-up 0.5 h
ð 5 %
ð ± 10 %
ð ± 0.06 % / K
For explosion hazardous areas see instruction
leaflet
at the electrical connection of the sensor
ð 10 % U
ss
ð 0.5 kV
ð [(UB -14 V) / 20 mA] kò
■ ATEX category II 1 G, Ex-zone 0
■ ATEX category II 2 D, Ex-zone 21
■ Threaded barrel, M18 x 1
■ Chrome-plated brass
■ 2-wire, 14…30 VDC
■ Analog output
■ 4…20 mA
■ M12 x 1 male connector
Wiring Diagram
Functional principle
Inductive sensors with analog output from
TURCK accomplish simple control tasks. They
provide a distance-proportional current signal.
Determined by the technology used, the maximum load in 2-wire technology is influenced
by the sensor's operating voltage. The load's
resistance must be selected so that the supply voltage of the sensor does not fall below
14 volts.
Measuring Range
Approval acc. to KEMA 03 ATEX 1122 X Issue no. 4
Design Threaded barrel,M18 × 1
Dimensions 72 mm
Housing material Metal, CuZn, Chrome-plated
Active area material Plastic, PA12-GF30
Max. tightening torque housing nut 25 Nm
Electrical connection Connector, M12 × 1
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP67
MTTF 751 years acc. to SN 29500 (Ed. 99) 40 °C
Packaging unit 1
Edition • 2018-04-09T20:32:22+02:00
1 / 4 TURCK Inc.
Inductive sensor
With analog output
BI8-M18-LI-EXI-H1141
Distance D 2 x B
Distance W 12 mm
Distance T 3 x B
Distance S 1.5 x B
Distance G 24 mm
Diameter active area B Ø 18 mm
Edition • 2018-04-09T20:32:22+02:00
2 / 4 TURCK Inc.