Turck BI6U-MT12-IOL6X2-H1141 Data Sheet
Inductive sensor
IO-Link Communication and Configuration
BI6U-MT12-IOL6X2-H1141
Type designation BI6U-MT12-IOL6X2-H1141
Ident-No. 1644874
Rated switching distance Sn 6 mm
Mounting conditions Flush
Secured operating distance
Repeat accuracy
Temperature drift
Hysteresis 3…15 %
Ambient temperature -25…+70 °C
ð (0,81 x Sn) mm
ð 2 % of full scale
ð ± 10 %
■ Threaded barrel, M12 x 1
■ Brass, PTFE-coated
■ Factor 1 for all metals
■ Protection class IP68
■ Resistant to magnetic fields
■ Large switching distance
■ DC 4-wire, 10…30 VDC
■ M12 x 1 connector
■ Configuration and communication via
IO-Link v1.1 or via standard I/O
■ Electrical outputs independently config-
urable
■ Switching distance can be parametrized
per output and hysteresis
■ Identification via 32-byte memory
■ Temperature monitoring with adjustable
limits
■ Various timer and pulse monitoring
functions
Wiring Diagram
Operating voltage 10…30 VDC
Residual ripple
DC rated operational current
No-load current I
Residual current
Isolation test voltage
Short-circuit protection yes/ Cyclic
Voltage drop at I
Wire breakage/Reverse polarity protection yes/ Complete
Output function 4-wire, NO/NC, PNP/NPN, IO-Link
Output 1 Switching output or IO-Link mode
Output 2 switching output
Switching frequency 0.5 kHz
IO-Link
IO-Link Specification V 1.1
IO-Link port type Class A
Communication Mode COM 2 (38.4 kBaud)
Process data width 16 bit
Switchpoint information 2 bit
Status bit information 3 bit
Frame type 2.2
Minimum cycle time 10 ms
Function Pin 4 IO-Link
Function Pin 2 DI
Maximum cable length 20 m
Design Threaded barrel,M12 × 1
Dimensions 52 mm
Housing material Metal, CuZn, PTFE-coated
Active area material Plastic, LCP, PTFE-coated
Max. tightening torque housing nut 7 Nm
Electrical connection Connector, M12 × 1
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP68
MTTF 874 years acc. to SN 29500 (Ed. 99) 40 °C
Packaging unit 1
0
e
ð 10 % U
ð 150 mA
ð 20 mA
ð 0.1 mA
ð 0.5 kV
ð 1.8 V
ss
Functional principle
Inductive sensors detect metal objects contactless and wear-free. uprox®3 sensors have
significant advantages due to their patented
ferrite-coreless multicoil system. They excel in
largest switching distances, maximum flexibility and operational reliability as well as efficient
standardization. In addition, the uprox®3-IO-
Link sensors allow certain parameters to be
set within predefined limits and various device
functions to be configured to customer needs,
using an IO-Link Master. For detailed information refer to the uprox®3-IO-Link manual.
Edition • 2018-04-09T15:34:27+02:00
1 / 4 TURCK Inc.
Inductive sensor
IO-Link Communication and Configuration
BI6U-MT12-IOL6X2-H1141
Power-on indication LED,Green
Switching state LED,Yellow
Edition • 2018-04-09T15:34:27+02:00
2 / 4 TURCK Inc.
Loading...