Turck BI5NF-EM18HE-AP6X2-H1141 Data Sheet
Inductive sensor
With selective behaviour
BI5NF-EM18HE-AP6X2-H1141
Type designation BI5NF-EM18HE-AP6X2-H1141
Ident-No. 1615000
Rated switching distance Sn 5 mm
Mounting conditions Flush
Secured operating distance
Repeat accuracy
Temperature drift
Hysteresis 3…15 %
Ambient temperature 0…+60 °C
Operating voltage 10…30 VDC
Residual ripple
DC rated operational current
No-load current I
Residual current
Isolation test voltage
Short-circuit protection yes/ Cyclic
Voltage drop at I
Wire breakage/Reverse polarity protection yes/ Complete
Output function 3-wire, NO contact, PNP
Protection class
Switching frequency 2.5 kHz
0
e
ð (0,81 x Sn) mm
ð 2 % of full scale
ð ± 10 %
ð 10 % U
ss
ð 200 mA
ð 15 mA
ð 0.1 mA
ð 0.5 kV
ð 1.8 V
÷
■ Threaded barrel, M18 x 1
■ Long version
■ Stainless steel, 1.4301
■ Duroplast front cap, very resistant to
thermal and mechanical load
■ Detects only non-ferromagnetic metal
■ DC 3-wire, 10…30 VDC
■ NO contact, PNP output
■ M12 x 1 male connector
Wiring Diagram
Functional principle
Inductive sensors detect metal objects contactless and wear-free. For this purpose they
use a high-frequency electromagnetic AC field
that interacts with the target.
Inductive sensors of the NF series with selective performance detect non-ferrous metals
only.
Design Threaded barrel,M18 × 1
Dimensions 72 mm
Housing material Stainless steel, V2A (1.4301)
Active area material Plastic, Duroplast
Max. tightening torque housing nut 25 Nm
Electrical connection Connector, M12 × 1
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP67
MTTF 874 years acc. to SN 29500 (Ed. 99) 40 °C
Power-on indication LED,Green
Switching state LED,Yellow
Edition • 2018-04-10T19:50:18+02:00
1 / 4 TURCK Inc.
Inductive sensor
With selective behaviour
BI5NF-EM18HE-AP6X2-H1141
Distance D 2 x B
Distance W 3 x Sn
Distance T 3 x B
Distance S 1.5 x B
Distance G 6 x Sn
Diameter active area B Ø 18 mm
Edition • 2018-04-10T19:50:18+02:00
2 / 4 TURCK Inc.
Loading...