Inductive sensor
With extended temperature range
BI5-EM18-AP6/S907 7M
Type designation BI5-EM18-AP6/S907 7M
Ident-No. 4617426
Rated switching distance Sn 5 mm
Mounting conditions Flush
Secured operating distance
Correction factors St37 = 1; Al = 0.3; stainless steel = 0.7; Ms = 0.4
Repeat accuracy
Temperature drift
Hysteresis 3…15 %
Ambient temperature -25…+160 °C
Operating voltage 10…30 VDC
Residual ripple
DC rated operational current
Rated operational current See derating curve
No-load current I
Residual current
Isolation test voltage
Short-circuit protection yes/ Cyclic
Voltage drop at I
Wire breakage/Reverse polarity protection yes/ Complete
Output function 3-wire, NO contact, PNP
Switching frequency 0.2 kHz
0
e
ð (0,81 x Sn) mm
ð 2 % of full scale
ð ± 20 %
ð 10 % U
ss
ð 200 mA
ð 15 mA
ð 0.1 mA
ð 0.5 kV
ð 1.8 V
■ Threaded barrel, M18 x 1
■ Stainless steel, 1.4571
■ Temperatures up to +160 °C
■ DC 3-wire, 10…30 VDC
■ NO contact, PNP output
■ Cable connection
Wiring Diagram
Functional principle
Inductive sensors detect metal objects contactless and wear-free. For this purpose they
use a high-frequency electromagnetic AC
field that interacts with the target. The sensors
hosting a ferrite core coil generate the AC field
through an LC resonant circuit.
Special versions are available for ambient
temperatures between -60°C and +250°C.
Derating Curve
Design Threaded barrel,M18 × 1
Dimensions 95 mm
Housing material Stainless steel, V4A (1.4571)
Active area material Plastic, PEEK
End cap Plastic, PTFE
Admissible pressure on front cap
Max. tightening torque housing nut 25 Nm
Electrical connection Cable
Cable quality 3.7mm, PTFE, FEP, 7
Cable cross section
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP68/IP69K
Edition • 2018-04-11T15:33:22+02:00
1 / 3 TURCK Inc.
ð 10 bar
3 x 0.34 mm
2
Inductive sensor
With extended temperature range
BI5-EM18-AP6/S907 7M
Distance D 2 x B
Distance W 3 x Sn
Distance T 3 x B
Distance S 1.5 x B
Distance G 6 x Sn
Diameter active area B Ø 18 mm
Edition • 2018-04-11T15:33:22+02:00
2 / 3 TURCK Inc.