Turck BI12-EG30F-AG6X Data Sheet
Inductive sensor
Stainless steel front
BI12-EG30F-AG6X
Type designation BI12-EG30F-AG6X
Ident-No. 4614667
Rated switching distance Sn 12 mm
Mounting conditions Flush
Secured operating distance
Correction factors St37 = 1; Al = 0.3; stainless steel = 0.7; Ms = 0.4
Repeat accuracy
Temperature drift
Hysteresis 1…15 %
Ambient temperature -10…+70 °C
ð (0,81 x Sn) mm
ð 2 % of full scale
ð ± 20 %
■ Threaded barrel, M30 x 1.5
■ Stainless steel, 1.4305
■ DC 2-wire, 10…30 VDC
■ Polarized version
■ NO contact
■ Cable connection
Wiring Diagram
Functional principle
Inductive sensors detect metal objects contactless and wear-free. For this, they use a
high-frequency electromagnetic AC field that
interacts with the target. Inductive sensors
generate this field via an RLC circuit with a
ferrite coil.
Operating voltage 10…30 VDC
Residual ripple
DC rated operational current
Rated operational current at 25°C
Residual current
Isolation test voltage
Short-circuit protection yes/ Cyclic
Voltage drop at I
Smallest operating current I
Switching frequency 0.05 kHz
Design Threaded barrel,M30 × 1.5
Dimensions 63.5 mm
Housing material Stainless steel, V2A (1.4305)
Active area material Stainless steel, 1.4305 (AISI 303)
End cap Metal
Max. tightening torque housing nut 180 Nm
Electrical connection Cable
Cable quality 6mm, Gray, LifYY, PVC, 2
Cable cross section
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP67
Packaging unit 1
Switching state 2-color LED,Red/Green
e
m
ð 10 % U
ð 100 mA
ð 0.8 mA
ð 0.5 kV
ð 3.5 V
ï 3 mA
2 x 0.5 mm
ss
2
Edition • 2018-04-03T19:52:33+02:00
1 / 3 TURCK Inc.
Inductive sensor
Stainless steel front
BI12-EG30F-AG6X
Distance D 100 mm
Distance W 48 mm
Distance T 30 mm (Fe metal); 120 mm (Fe non-metal)
Distance S 50 mm (Fe metal); 60 mm (non Fe-metal)
Distance G 110 mm
Diameter active area B Ø 30 mm
Switching distance not reduced when flush mounted in
ferrous metals
When mounted in non-ferrous metals the active face
has to protrude 24 mm.
The values depend on the mounting nuts used. There-
fore we recommend the use of the nuts which are in-
cluded in the delivery.
Edition • 2018-04-03T19:52:33+02:00
2 / 3 TURCK Inc.
Loading...