Inductive sensor
With selective behaviour
BI10NF-M30-AP6X
Type designation BI10NF-M30-AP6X
Ident-No. 16061
Rated switching distance Sn 10 mm
Mounting conditions Flush
Secured operating distance
Repeat accuracy
Temperature drift
Hysteresis 3…15 %
Ambient temperature 0…+60 °C
ð (0,81 x Sn) mm
ð 2 % of full scale
ð ± 10 %
■ Threaded barrel, M30 x 1.5
■ Chrome-plated brass
■ Detects only non-ferromagnetic metal
■ DC 3-wire, 10…30 VDC
■ NO contact, PNP output
■ Cable connection
Wiring Diagram
Functional principle
Inductive sensors detect metal objects contactless and wear-free. For this purpose they
use a high-frequency electromagnetic AC field
that interacts with the target.
Inductive sensors of the NF series with selective performance detect non-ferrous metals
only.
Operating voltage 10…30 VDC
Residual ripple
DC rated operational current
No-load current I
Residual current
Isolation test voltage
Short-circuit protection yes/ Cyclic
Voltage drop at I
Wire breakage/Reverse polarity protection yes/ Complete
Output function 3-wire, NO contact, PNP
Protection class
Switching frequency 2 kHz
Design Threaded barrel,M30 × 1.5
Dimensions 64 mm
Housing material Metal, CuZn, Chrome-plated
Active area material Plastic, PA12-GF30
End cap Plastic, EPTR
Max. tightening torque housing nut 75 Nm
Electrical connection Cable
Cable quality 5.2mm, LifYY, PVC, 2
Cable cross section
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP67
MTTF 874 years acc. to SN 29500 (Ed. 99) 40 °C
Switching state LED,Yellow
0
e
ð 10 % U
ð 200 mA
ð 15 mA
ð 0.1 mA
ð 0.5 kV
ð 1.8 V
÷
3 x 0.5 mm
ss
2
Edition • Rev. D • 2018-04-10T19:11:12+02:00
1 / 3 TURCK Inc.
Inductive sensor
With selective behaviour
BI10NF-M30-AP6X
Distance D 2 x B
Distance W 3 x Sn
Distance T 3 x B
Distance S 1.5 x B
Distance G 6 x Sn
Diameter active area B Ø 30 mm
Edition • Rev. D • 2018-04-10T19:11:12+02:00
2 / 3 TURCK Inc.
Inductive sensor
With selective behaviour
BI10NF-M30-AP6X
Accessories
Type code Ident-No. Description
BST-30B 6947216 Fixing clamp for threaded barrel devices, with dead-stop; ma-
terial: PA6
QM-30 6945103 Quick-mount bracket with dead-stop; material: Chrome-plat-
ed brass Male thread M36 x 1.5. Note: The switching dis-
tance of proximity switches can be reduced by the use of
quick-mount brackets.
MW-30 6945005 Mounting bracket for threaded barrel devices; material: Stain-
less steel A2 1.4301 (AISI 304)
BSS-30 6901319 Mounting bracket for smooth and threaded barrel devices;
material: Polypropylene
Edition • Rev. D • 2018-04-10T19:11:12+02:00
3 / 3 TURCK Inc.
Loading...