Turck BI0.8-EG05-Y1/S100 Data Sheet
Inductive sensor
With extended temperature range
BI0.8-EG05-Y1/S100
Type designation BI0.8-EG05-Y1/S100
Ident-No. 1003201
Rated switching distance Sn 0.8 mm
Mounting conditions Flush
Secured operating distance
Correction factors St37 = 1; Al = 0.3; stainless steel = 0.7; Ms = 0.4
Repeat accuracy
Temperature drift
Hysteresis 1…10 %
Ambient temperature -25…+100 °C
ð (0,81 x Sn) mm
ð 2 % of full scale
ð ± 10 %
ð ± 20 %, ï +70 °C
For explosion hazardous areas see instruction
leaflet
■ ATEX category II 1 G, Ex-zone 0 for tem-
peratures up to +80 °C
■ ATEX category II 2 G. Ex-zone 1
■ ATEX category II 1 D, Ex-zone 20 for
temperatures up to +70 °C
■ SIL2 (Low Demand Mode) acc. to IEC
61508, PL c acc. to ISO 13849-1 at HFT0
■ SIL3 (All Demand Mode) acc. to IEC
61508, PL e acc. to ISO 13849-1 with redundant configuration HTF1
■ Threaded barrel, M5 x 0.5
■ Stainless steel, 1.4427 SO
■ Temperatures up to +100 °C
■ DC 2-wire, nom. 8.2 VDC
■ Output acc. to DIN EN 60947-5-6 (NA-
MUR)
■ Cable connection
Wiring Diagram
Output function 2-wire, NAMUR
Switching frequency 5 kHz
Voltage Nom. 8.2 VDC
Non-actuated current consumption
Actuated current consumption
Approval acc. to KEMA 02 ATEX 1090X
Design Threaded barrel,M5 × 0.5
Dimensions 30 mm
Housing material Stainless steel, 1.4427 SO
Max. tightening torque housing nut 5 Nm
Electrical connection Cable
Cable quality 3mm, Blue, Lif9YYW, PVC, 2
Cable cross section
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP67
MTTF 6198 years acc. to SN 29500 (Ed. 99) 40 °C
Packaging unit 1
ï 2.1 mA
ð 1.2 mA
2 x 0.14 mm
2
Functional principle
Inductive sensors detect metal objects contactless and wear-free. For this purpose they
use a high-frequency electromagnetic AC
field that interacts with the target. The sensors
hosting a ferrite core coil generate the AC field
through an LC resonant circuit.
Special versions are available for ambient
temperatures between -60°C and +250°C.
Edition • 2018-04-10T21:45:28+02:00
1 / 4 TURCK Inc.
Inductive sensor
With extended temperature range
BI0.8-EG05-Y1/S100
Distance D 2 x B
Distance W 3 x Sn
Distance T 3 x B
Distance S 1.5 x B
Distance G 6 x Sn
Diameter active area B Ø 5 mm
Edition • 2018-04-10T21:45:28+02:00
2 / 4 TURCK Inc.
Loading...