Turck BC10-QF5.5-RP6X2/S932 Data Sheet
Capacitive sensor
BC10-QF5.5-RP6X2/S932
Type designation BC10-QF5.5-RP6X2/S932
Ident-No. 2620141
Rated switching distance (flush) 10 mm
Rated switching distance (non-flush) 10 mm
Secured operating distance
Hysteresis 2…20 %
Temperature drift type 20 %
Repeat accuracy
Ambient temperature -25…+70 °C
Operating voltage 10…30 VDC
Residual ripple
DC rated operational current
No-load current I
Residual current
Switching frequency 0.1 kHz
Isolation test voltage
Output function 3-wire, NC contact, PNP
Short-circuit protection yes/ Cyclic
Voltage drop at I
Wire breakage/Reverse polarity protection yes/ Complete
0
e
ð (0.72 x Sn) mm
ð 2 % of full scale
ð 10 % U
ss
ð 200 mA
ð 15 mA
ð 0.1 mA
ð 0.5 kV
ð 1.8 V
■ Rectangular, height 5.5 mm
■ Active face on top
■ Plastic, PP
■ Fine adjustment via potentiometer
■ Potentiometer sealed
■ Without metal insert
■ DC 3-wire, 10…30 VDC
■ NC contact, PNP output
■ Cable connection
Wiring Diagram
Functional principle
Capacitive proximity switches are designed
for non-contact and wear-free detection of
electrically conductive as well as non-conductive metal objects.
Approvals UL
Design Rectangular,QF5,5
Dimensions 54 x 20.3 x 5.5 mm
Housing material Plastic, PP
Active area material Plastic, PP
Electrical connection Cable
Cable quality Ø 3mm, LifYY-11Y, PUR, 2
Cable cross section
Vibration resistance 55 Hz (1 mm)
Shock resistance 30 g (11 ms)
Protection class IP67
MTTF 1080 years acc. to SN 29500 (Ed. 99) 40 °C
Packaging unit 1
Power-on indication LED,Green
Switching state LED,Yellow
Edition • 2018-04-06T16:18:39+02:00
1 / 2 TURCK Inc.
3 x 0.14 mm
2
Capacitive sensor
BC10-QF5.5-RP6X2/S932
Distance D 40 mm
Distance W 30 mm
Distance S 30 mm
Distance G 60 mm
Diameter active area B Ø 20 mm
The given minimum distances have been checked
against the standard switching distance.
Should the sensitivity of the sensors be changed via
potentiometer, the data sheet specifications no longer
apply.
Edition • 2018-04-06T16:18:39+02:00
2 / 2 TURCK Inc.
Loading...