Turck Analog Sensors Catalog Page
Analog Sensors Selection Guide
Embeddable/Nonembeddable Rectangular
Housing 8 mm 14 mm 20 mm
Sensing Range 7 mm 10 mm 15 mm
Pages D5 D5 D5
Embeddable/Nonembeddable Rectangular
We reserve the right to make technical alterations without prior notice.
Housing 40 mm 40 mm 80 mm
Sensing Range 15 - 25 mm 15 - 25 mm 50 mm
Pages D7 D7 D7
Embeddable/Nonembeddable Barrels
Housing 4 mm 5 mm 6.5 mm 8 mm
Sensing Range 1.5 mm 1.5 mm 1.5 mm 1.5 mm
Pages D9 D9 D9 D9
D1
Turck Inc.
Analog Sensors Selection Guide
Embeddable/Nonembeddable Barrels
Housing 12 mm 12 mm 18 mm
Sensing Range 2 - 5 mm 2 - 5 mm 5 - 10 mm
Pages D11 D11 D11
Embeddable/Nonembeddable Barrels
Housing 18 mm 30 mm 30 mm
Sensing Range 5 - 10 mm 10 - 15 mm 10 -15 mm
Pages D13 D13 D13
We reserve the right to make technical alterations without prior notice.
Housing 14 mm 80 mm 18 mm
Sensing Range 20 mm 50 mm 40 - 70 mm
Pages D15 D15 D15
Rings and Probe Style
Analog Sensors
Turck Inc.
D2
Analog Sensor Part Number Key
B I 15 - M 30 - LIU Wiring Option*
Mounting
B = embeddable
N = nonembeddable
W = position
Principle of Operation
I = inductive
IM = inductive magnet operated
Rated Operating Distance (mm)
Sensing Characteristics
R = ring sensor
Housing Material Modier
E = stainless steel
Housing Style
Barrel - Metal
G = full threading, generally chrome plated brass
M = partial threading, chrome plated brass
Rectangular
Q = metal or plastic, various rectangular styles
Limit Switch
CK = Stubby®, short plastic, various rectangular styles
CP = Combiprox®, plastic housing, terminal chamber base
with removable sensor
Ring
Q = small rectangular plastic housing, static output
Number of LEDs
(blank) = no LEDs
X = 1 LED
Modier
Output
LF = frequency output
LI(LU) = linear analog output current (LI, 15-30 VDC) or voltage (LU, 15-30 VDC)
LIU = linear analog output (current and voltage, 15-30 VDC)
SIU = analog output (non-linear)
Secondary Barrel Modier
E = extended barrel length
Housing Diameter or Height (mm)
NOTE:
Part number keys are to assist in identication only.
Verify new part numbers with factory; some congurations are not possible.
*See below for Wiring Options
We reserve the right to make technical alterations without prior notice.
Wiring Options*
A. Connectorized Sensor
Connector Family
H1 = Eurofast®, M12x1, metal or plastic, male
V1 = Picofast®, snap and M8x1, metal, male (Q08 snap only)
Connector/Sensor Transition
1 = straight
B. Potted Cable
D3
Turck Inc.
BI15 - M30 - LIU - H1 1 4 1
Factory Code
Example:
1 = standard wiring
Number of Pins
Bi 5 - M18 - LIU - 7M
Cable Length
Blank = 2 Meter cable
7M = 7 Meter cable
Analog Sensors
Common Applications for Linear Analog Sensors
Position Feeding Over an Angled Target
Eccentricity Sensing or Absolute Angle Positioning
Direct Actuation
Part Deection
• Actuation over an angled surface
• Provide a 4-20 mA and/or 0-10 V output based upon target position
• Sense pieces of dierent shapes and sizes (of ferritic or nonferritic materials)
• Provide analog feedback on rotary cam position applications
• The highest accuracy is achieved if the sensor is directly actuated by the target. In order to
utilize the full measuring range, it is important to work with an appropriately sized target.
This may also be a moving part of the machine.
• Tensile stress control applications
• Measure the deection of a metal target by using a guide mechanism and an
analog sensor.
Analog Sensors
Probe Style Analog+ Proximity Sensor
• These sensors can be used to detect the depth of a blind hole or be used with a ring
We reserve the right to make technical alterations without prior notice.
attached to a control arm that moves the ring over the probe
Identication and Sorting of Small Parts
• When screws, rivets, or other small objects fall through a ring style sensor, each part
generates a characteristic output signal which can be easily identied
Position Control
• Position control can be easily accomplished by means of a cone shaped target. Measuring
ranges can be adapted to specic sensing needs by using targets with an appropriate
conical shape. These sensors enable precise and simple position detection, even if the
targets feature a slight oset.
Turck Inc.
Thickness Measurement
• Detection and measurement of tools (drill bits, taps, etc.) can be accomplished to ensure
proper size
D4
Analog Sensors | Q08, Q14, & Q20
Top Sensing Qpak Housing
Housing Style Dimension Drawings
B
A
8 mm - Embeddable, Potted-In Cable
C
We reserve the right to make technical alterations without prior notice.
14 mm - Embeddable, M8 Picofast Connection
1 2
A7
Ripple:
No-Load Current:
Load Resistance Voltage Output:
Load Resistance Current Output:
Temperature Drift:
LIU5:
LIU2:
A8
Ripple:
No-Load Current:
Load Resistance Voltage Output:
Temperature Drift:
Reverse Polarity Protection:
Transient Protection:
Mating Cordset: PKG 4M-*
≤10%
≤8.0 mA
0-10 V/R
≥4.7 kΩ
L
0-20 mA/R
±0.06% / °C
4-20 mA, 0-10 V
4-20 mA, 2-10 V
≤10%
≤8.0 mA
0-10 V/R
±0.06% / °C
Incorporated
Per EN 60947-5-2
≤0.4 kΩ
L
≥4.7 kΩ
L
Wiring Diagrams/Mating Cordsets
3
Mating Cordset: RK 4.4T-*
3 and 4-wire DC Analog - (LIU, SIU)
Reverse Polarity Protection:
3 and 4-wire DC Analog - (LU)
20 mm - Embeddable, M12 Eurofast Connection
4
Mating Cordset: RK 4.4T
Transient Protection:
Shock:
Vibration:
Repeatability:
Short-Circuit Protection:
Short-Circuit Protection:
Wire-Break Protection:
Shock:
Vibration:
Repeatability:
Per EN 60947-5-2
30 g, 11 ms
55 Hz, 1 mm Amplitude, in all 3 Planes
≤1% of measuring range |A-B|
(0.5% after 30 min. warm up)
Yes
Incorporated
Yes
Yes
30 g, 11 ms
55 Hz, 1 mm Amplitude, in all 3 Planes
≤1% of measuring range |A-B|
(0.5% after 30 min. warm up)
D5
Turck Inc.
Loading...