• 600-Watt 2-Way loudspeaker
system for FOH and floor
monitoring applications
• KLARK TEKNIK signal processor
dynamically optimises sound
quality at all levels and protects
drivers
• Converging Elliptical Waveguide
provides wide dispersion and
excellent pattern control
• State-of-the-art aluminiumdiaphragm compression driver for
exceptional high-frequency
reproduction
• Long-excursion 10” low-frequency
driver provides extremely deep
bass response
• Sophisticated Class-D amplifier
delivers your sound with clarity
and definition
• Roadworthy and lightweight
composite cabinet with black
finish
• 2 discrete mic/line input channels
with individual level controls and
peak indicators
• Musical 2-band EQ for flexible
sound adjustment
• Speech/music switch featuring
optimised EQ for voices or music
applications
• Designed and engineered by
TURBOSOUND in England
Milan M10
600-Watt Powered 10” Loudspeaker with KLARK TEKNIK DSP Technology
The Milan M10 is a portable 10” two-way powered loudspeaker featuring two independent input
channels, mic and line inputs, two band EQ, intelligent limiting, and a Mix Out function for
connection to additional Milan loudspeakers for easy system expansion.
The Class-D amplifier is a two channel unit with an integrated electronic crossover,
allowing the HF and LF drivers to be powered separately without one being able to
influence the sound of the other. Total output power is 600 watts peak, providing plenty of
headroom to maintain good dynamic range so that transient signals are delivered
effortlessly. The lightweight switch-mode power supply couples with industry leading
Klark Teknik digital signal processing, providing dynamic equalisation and sophisticated
limiting functions to ensure optimum performance and long term reliability.
The two discrete input channels are each equipped with balanced combination jack/XLR
connectors and a level control, catering for a broad range of music sources from low
impedance microphones, acoustic guitars and keyboards, to mp3 players and mixing
consoles, selectable via a mic/line slide switch.
Common to both channels are bass and treble controls with ±6dB of cut or boost to allow
the loudspeaker to be equalised to the venue. In addition, a low cut filter is provided at
100Hz to shelve the low frequency response when used on the floor as a wedge monitor,
or to ensure correct integration with subwoofers. A speech/music switch optimises the
loudspeaker’s frequency response either for predominantly vocal material or for music
programme. A Mix Out function sends the mix of both input channels post-EQ to
additional Milan loudspeakers on a balanced male XLR for easy system expansion.
Milan
series
MUSIC Group IP Ltd.
Trident Chambers, Wickhams
Cay, P.O. Box 146, Road Town,
Tortola, British Virgin Islands
The trapezoidal enclosure is fabricated from high density polypropylene, and is
extensively ribbed externally and internally to eliminate resonances and also to provide
an attractive and durable cabinet finish. The symmetrical side angles allow the
loudspeaker to be conveniently used as a floor monitor. The recessed grab handle on the
top is designed for easy lifting and carrying, while the dual angle pole mount socket
allows the loudspeaker to be mounted on straight poles or speaker stands either
vertically, or raise higher and angled down to optimise audience coverage. A total of six
M10 rigging points are provided on the top and bottom of the cabinet to enable vertical or
horizontal suspension in permanent installations using M10 shoulder eyebolts.
Mains power is connected via a non-locking IEC receptacle with integrated fuseholder.
The illuminated front badge can operate in one of three possible modes: permanently on;
permanently off; or to indicate the action of limiting.
Page 2
Milan M10
600-Watt Powered 10” Loudspeaker with KLARK TEKNIK DSP Technology
DIMENSIONS (HxWxD)
NET WEIGHT
COMPONENTS
FREQUENCY RESPONSE
NOMINAL DISPERSION
MAXIMUM SPL
CONSTRUCTION
GRILLE
CONNECTORS
CONTROLS
INDICATORS
AMPLIFIER
522 x 329 x 294 mm (20.6 x 13 x 11.6”)
13.3kg (29.3lbs)
1 x 10” (254mm) LF driver, 1 x 1” (25mm) HF compression driver
55Hz – 18kHz ±3dB, 50Hz – 20kHz -10dB
90°H x 60°V @ -6dB points
126dB (peak)
Injection-moulded polypropylene enclosure. Recessed carrying handle. Integral
dual-angle pole mount socket
Powder coated galvanised perforated steel mesh grille with foam backing
Amplifier Protection: Full short circuit, open circuit, thermal
MAINS VOLTAGE
POWER CONSUMPTION
RIGGING OPTIONS
SPARES AND ACCESSORIES
MORE INFO
USA / CAN: 100–120V~ (T 6.3 A H 250 V)
UK / AUS / EUR: 220–240V~ (T 3.15 A H 250 V)
CH: 220–240V~ (T 3.15 A H 250 V)
JP: 100–120V~ (T 6.3 A H 250 V)
80 W @1/8 max power
(6) M10 threaded internal rigging points
LS-1032 10” (254mm) replacement LF loudspeaker
RC-1032 Recone kit
CD-125 1” (25mm) HF compression driver
RD-125 HF diaphragm
AMP-M10 Replacement amplifier assembly
PB-55 Wall bracket, pole mount fixing
EB-10 M10 shoulder eyebolt
More information can be found on our website: www.turbosound.com
Page 3
(dB) Level, Sound pressure SPL
Frequency (Hz
Milan M10
600-Watt Powered 10” Loudspeaker with KLARK TEKNIK DSP Technology
Frequency
Response
Flying & Rigging
Hardware
0
0
0
0
0
0
20502005002k5k20k
The Milan M10 loudspeaker can be wall mounted using the PB-55 universal wall
bracket with the built in pole mount socket.
It can also be suspended in permanent installations using shoulder eyebolts
attached to the M10 rigging points provided on the top and bottom of the
cabinet. The loudspeaker can be oriented either vertically or horizontally to suit
the available venue space.
1001k10k
)
EB-10 EyeboltsPB-55 Wall Mount
Page 4
Milan M10
600-Watt Powered 10” Loudspeaker with KLARK TEKNIK DSP Technology
A&E
Specifications
Dimensions
The system shall be of the two-way self-powered type consisting of one 10” (254mm)
low frequency loudspeaker and one 1” (25mm) aluminium diaphragm high frequency
compression driver together with an integrated Class-D amplifier providing two
independent input channels with microphone and line inputs, bass and treble
equalisation, low cut filter, speech/music contour and Mix Out function. Performance
specifications of a typical production unit shall meet or exceed the following:
frequency response, measured with swept sine wave input, shall be flat within ±3dB
from 55Hz to 18kHz, and within -10dB from 50Hz to 20kHz. Nominal dispersion, at -6dB
points, shall average 90°H x 60°V. Maximum SPL measured with music program input
shall be 126dB (peak).
Dimensions: 522mm high x 329mm wide x 294mm deep (20.6” x 13” x 11.6”). Net
weight: 13.3kg (29.3lbs). The loudspeaker system shall be the Turbosound Milan M10.
No other loudspeaker shall be acceptable unless submitted data from an independent
test laboratory verify that the above combined performance / size specifications are
equalled or exceeded.
TOPBOTTOM
329mm [13”]
522mm [20.6”]
FRONTSIDEREARSIDE
294mm [11.6”]
Limited Warranty and Service Information
For the applicable warranty terms and conditions and additional information regarding MUSIC Group’s Limited Warranty, please see complete details online
at www.music-group.com/warranty.
For service, support or more information contact the TURBOSOUND location nearest you.
Europe: MUSIC Group Services UK. Tel: +44 156 273 2290 Email: CARE@music-group.com
USA/Canada: MUSIC Group Services NV Inc. Tel: +1 702 800 8290 Email: CARE@music-group.com
Japan: MUSIC Group Services JP K.K. Tel.: +81 3 6231 0454 Email: CARE@music-group.com
(music-group.com). The information contained herein is correct at the time of printing. Technical specifications and appearance are subject to change without
notice. Colors and specifications may vary from actual product. MUSIC Group IP Ltd. accepts no liability for any damages or loss which may be suffered by
any person who relies either wholly or in part upon any description, photograph or statement contained herein. All trademarks are the property of their
respective owners. Products are sold through authorized Fullfillers and Resellers only. Fullfillers and Resellers are not agents of MUSIC Group IP Ltd. or any of
its affiliates and subsidiaries, and have absolutely no authority to bind MUSIC Group IP Ltd. by any express or implied undertaking or representation.
MUSIC Group IP Ltd. Trident Chambers, Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands.
Milan M10 datasheet v1.0 06/2013
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.