10" Band Pass Subwoofer for
InstallationApplications (White)
Band pass subwoofer for
#
installation applications
300 Watts continuous,
#
1,200 Watts peak power
HIgh excursion 10" low frequency
#
driver with inside/outside wound coil
Low distortion dual port design for
#
maximum sound pressure level
15 m m (⁄") birch plywood enclosure
#
with hard wearing semi matt white
paint nish
Integral M10 rigging points for
#
ease of installation
Neutrik speakON* NL4 and
#
barrier strip connectors
The 1,200-Watt TCS110B-WH is a high
performance 10" subwoofer system
designed for a wide range of speech
and music sound reinforcement
applications. Engineered to work
in conjunction with TURBOSOUND
loudspeaker management systems,
the TCS110B-WH provides extended
low frequency performance from a
compact enclosure.
3-Year Warranty Program*
#
Designed and engineered
#
in England
A dual port design enclosure, the TCS110B-WH features an
extremely powerful, high excursion 10" low frequency driver with a
specialised voice coil wound on both the inside and outside of the coil
former for higher magnetic density, heat dissipation, higher power
handling capacity, and improved e ciency. The TCS110B-WH provides
fast and accurate transient response for virtually distortion-free operation
– even in your most demanding performances.
Finished in a highly durable semi matt white paint, the cabinet is
constructed from 15 mm (⁄") birch plywood with integral M10 threaded
rigging points. The rear panel connector plate carries Neutrik speakON*
NL4 and barrier strip connectors for input and link connections to
additional enclosures.
*All third-pa rty tradema rks are the prop erty of their re spective owne rs.
Their use n either constitu tes a claim of the trad emark nor a liation of
the tradem ark owners with MU SIC Group. Produc t names are mentio ned
solely as a re ference for comp atibility, e ects and/or components.
Warranty d etails can be fou nd at music-group.c om.
Page 2
2 o
f 9
Product Information Document
Install Speakers
ATHENS
TCS110B-WH
10" Band Pass Subwoofer for
InstallationApplications (White)
You Are Covered
We always strive to provide the best possible Customer Experience. Our products are made in our
own MUSIC Group factory using state-of-the-art automation, enhanced production work ows and
quality assurance labs with the most sophisticated test equipment available in the world. As a result,
we have one of the lowest product failure rates in the industry, and we con dently back it up with a
generous 3-Year Warranty program.
2 of 9
Page 3
3 o
f 9
Product Information Document
Install Speakers
ATHENS
TCS110B-WH
10" Band Pass Subwoofer for
InstallationApplications (White)
Frequency Response Sensitivity 1 W / 1 m
Impedance
110
104
98
92
86
80
Sound Pressure Level (dB)
74
68
62
201001k10k20k
300
Frequency (Hz)
200Hz Low Pass
100
10
Magnetude (Ohms)
1
201001k10k20k
Frequency (Hz)
3 of 9
Page 4
4 o
f 9
Product Information Document
Install Speakers
ATHENS
TCS110B-WH
10" Band Pass Subwoofer for
InstallationApplications (White)
Dimensions
50.0 [1.9750 ]230.0 [9.0500 ]
330.0 [13.0000]
TOP
585.0 [23.0315]
FRONT
80.0 [3.1500 ]425.0 [16.7375 ]
230.0 [9.0500]50.0 [1.9750]
425.0 [16.7375 ]80.0 [3.1500]
BOTTOM
330.0[13.0000]
30.8 [1.2125 ]
292.5[11.5125]
REARSIDE
4 of 9
Page 5
5 o
f 9
Product Information Document
Install Speakers
ATHENS
TCS110B-WH
10" Band Pass Subwoofer for
InstallationApplications (White)
Technical Speci cations
System
Frequency Response50 Hz - 150 Hz ±3 dB40 Hz - 200 Hz -10 dB
Nominal Dispersion Half spacee
Power Handling (IEC) 300 W continuous, 1200 W peak
Sensitivity 94 dB (1 W @ 1 m)
Maximum SPL 119 dB continuous, 125 dB peak
Impedance 8
Components 1 x 10" (262 mm) LF driver
Enclosure
Connectors1 x Neutrik speakON* NL4, 1 x barrier strip terminals
Wiring
Parallel / No switch Pins 1+ / 1- input, pins 2+ / 2- link
Discrete –
Dimensions HWD 330 x 585 x330 mm (13.0 x 23.0 x 13.0")
Net Weight 15.8 kg (34.8 lbs)
Construction 15 mm (⁄") birch plywood
Finish Semi matt white paint
Grille Powder-coated perforated steel
Flying Hardware M10 x 8
5 of 9
Page 6
6 o
f 9
Product Information Document
Install Speakers
ATHENS
TCS110B-WH
10" Band Pass Subwoofer for
InstallationApplications (White)
Architecture & Engineering Speci cations
The speaker shall be of the passive subwoofer type consisting of one 10" (262 mm) LF driver. Performance speci cations of a typical production
unit shall meet or exceed the following: frequency response, measured with swept sine wave input, shall be at within ±3 dB from 50 Hz to
150 Hz and within -10 dB from 40 Hz to 200 Hz. Nominal dispersion shall be “half space.” Nominal impedance shall be 8 Ohms. Power handling
shall be 300 Watts continuous, 1,200 Watts peak. Sensitivity, measured on axis, mean averaged over stated bandwidth, shall be 94 dB,
1 Watt @ 1metre. Maximum SPL (peak), measured at 1 metre with music program at stated ampli er input, shall be 125 dB. Dimensions:
330 mm high x 585 mm wide x 330 mm deep (13.0" x 23.0" x 13.0"). Net weight: 15.8 kg (34.8 lbs). The loudspeaker system shall be the
TURBOSOUND TCS110B-WH . No other loudspeaker shall be acceptable unless submitted data from an independent test laboratory veri es
that the above combined performance / size speci cations are equaled or exceeded.
6 of 9
Page 7
7 o
f 9
Product Information Document
Install Speakers
ATHENS
TCS110B-WH
10" Band Pass Subwoofer for
InstallationApplications (White)
7 of 9
Page 8
Product Information Document
8
Install Speakers
ATHENS
TCS110B-WH
10" Band Pass Subwoofer for
InstallationApplications (White)
8 of 9
of 9
Page 9
Product Information Document
Install Speakers
ATHENS
TCS110B-WH
10" Band Pass Subwoofer for
InstallationApplications (White)
For service, support or more information contact the TURBOSOUND location nearest you: