Turbo Air TSD-27CF Installation Manual
CAUTION!
PLEASE KEEP POWER
SWITCH ON BEFORE
OPERATING THIS EQUIPMENT
Turbo Air Speed up the Pace of Innovation
Ice Cream
Freezer
Installation and Operation Manual
Please read this manual completely before attempting to install or operate this equipment!
TSD-27CF
TSD-35CF
TSD-47CF
TSD-60CF
www.turboairinc.com
CONTENTS
PAGE
SPECIFICATION
PRODUCT CHARACTER
TROUBLE SHOOTING
INSTALLATION
OPERATION AND CAUTION
DEFROSTING
CLEANING & MAINTENANCE
CAUTION
PART IDENTIFICATION
ELECTRICITY PRINCIPLE DIAGRAM
WARRANTY
SPECIFICATIONS
2
2
3
4
4-5
5
5
6
7
8
9-10
PRODUCT CHARACTER
This product which combines the essence of European and Asian prosuct design adopts
many advanced technological features. It has the advantage of beautiful shape, quick
chilling and energy saving. It is outstanding for sales as well as strong a variety of frozen
foods.
2
TROUBLE SHOOTING
The following phenomenon is normal which won’t impact the freezer’s natural running.
1. When freezer is running, the sound of the flowing water may be heard from the
internal system of refrigerant. This is normal.
2. When freezer is running, the compressor can feel hot to touch. This is normal.
3. The frost will appear on the surface of the freezer when there is a high degree of
environmental humidity and the frost can be wiped down.
Trouble shooting
Familiar breakdown and handle way
SYMPTOMS
1
Disable to cooling
2
3
The noise is big
CAUSES SOLUTIONS
Power off
Unplug
The set temperature is too higher.
The knob of temperature
controller placed higher position.
for example 2 or 3
Put the freezer in the sunshine or
close the hot object
Excessive food stored at one
time more than 20% of the storage
volume
Open the door excessively
The ground is no neat
Checking by electricity
Check
Turn the knob to the higher
position for example 4 or 5
Change the place
Less than 20% of the storage
volume
Decrease the times of opening
Improve the position of placed
Can’t shut down
of machine
4
The knob of temperature
controller placed “soon freezing
area” or “freezing area” lower
position
3
Adjust the knob to the place higher
than “soon freezing area” or
“freezing area”
INSTALLATION
1. Never have unit higher a 45 degree angel while transporting, when installing unit,
must be leveled.
2. Please be careful while moving and installing unit so that the compressor and system
do not get disrupted.
OPERATION AND CAUTION
When you plug the unit, there will be a green light, if you do not see a green light,
please do step #1 of trouble shooting. If this does not work, please call for service.
CAUTION
1. Never operate the machine with “Soon freezing area” for a long time. (less than 24 hrs)
Otherwise, it will not allow the compressor to shut down, and shorten the
compressor’s life
2. The knob of temperature controller can not turn from “Soon freezing area” to
“Refrigeration area” directly. It only can be turn clockwise from “Refrigeration area”
to “Soon freezing area”
4
Loading...