
Turbo Air Speeds up the Pace of Innovation
Underbar Equipment
Bottle Coolers
Installation and Operation Manual
Please read this manual completely before attempting to install or operate this equipment!
TBC-24SD TBC-24SB
TBC-36SD TBC-36SB
TBC-50SD TBC-50SB
TBC-65SD TBC-65SB
TBC-80SD TBC-80SB
TBC-95SD TBC-95SB
B
SD series: Stainless Steel Exterior
SB series: Black Laminated Vinyl Exterior or Black Powder Coating Exterior
r
r
www.turboairinc.com

CONTENTS
PAGE
SPECIFICATIONS
SERIAL NUMBER
INSTALLATION OF THE BOTTOM SHELVES
INSTALLATION OF THE DIVIDERS
INSTALLATION OF THE OPENER KIT
HOW TO USE THE BOTTLE OPENER
INSTALLATION
CLEANING & CAUTION
BASIC OPERATION
TROUBLESHOOTING
WARRANTY
SPECIFICATIONS
2
2
3
4
5
6
7
8
9
10
11-13
Horizontal Bottle Coolers
MODEL COMP H.P. V/Hz REFRIGERANT AMPS WEIGHT
TBC-24SD/SB 1/10 115V/60Hz R-134a 4.0A 175 lbs
TBC-36SD/SB 1/4 115V/60Hz R-134a 4.5A 221 lbs
TBC-50SD/SB 1/3 115V/60Hz R-134a 6.8A 266/275 lbs
TBC-65SD/SB 1/3 115V/60Hz R-134a 7.0A 326 lbs
TBC-80SD/SB 1/2 115V/60Hz R-134a 9.0A 378 lbs
TBC-95SD/SB 1/2 115V/60Hz R-134a 9.2A 444/442 lbs
SERIAL NUMBER
The serial number is located on the rating label which is on interior
right side wall. Please retain the unitʼs serial number for service purpose.
2

INSTALLATION OF THE BOTTOM SHELVES
1) Before adding cans or bottles to cooler, please install bottom shelves.
2) Then install dividers (see page 4).
* Note:
The size and quantities of the bottom shelves can be different according
to model number.
3

INSTALLATION OF THE DIVIDERS
1) To re-position divider, push back wards.
2) Spring in back of divider point ʻCʼ will be shorten to about 1/2 inch.
3) Front of divider will be able to remove from point ʻAʼ and ʻBʼ.
4) Position divider in the hole, point ʻCʼ where you would like it.
5) Push divider back wards.
6) Insert front of divider in the holes, point ʻAʼ and ʻBʼ, where you would like it.
ʻAʼ
ʻCʼ
ʻBʼ
* Note :
The shape and quantities of the dividers can be different according to
model number.
4