Turbo Air GBS-450S User Manual
4184 E. Conant st.
Long Beach, CA 90808
Tel. 800-500-3519
Fax. 310-900-1066
www.turboairinc.com
Project :
Model # :
Item # : Qty :
Available W/H :
Approval :
Meat Saw
FEATURES & BENEFITS
All stainless steel internal parts
All of the internal metal parts including the upper wheel, lower wheel, upper
wheel hinge and the lower bearing housing are made with stainless steel.
Electrical control system
The magnetic switch system ensures consistent electrical contact which
provides safety through dynamic braking and automatic overload protection.
Frame materials
All frame and food contact parts are made with either stainless steel (GBS270S, GBS-450S) or aluminum (GBS-230A) providing improved durability and
sanitation.
Motor
The motor produces less heat and runs at a lower temperature by using a type
“A” grade insulation. The motor also uses a cooling fan to reduce the
possibility of overheating and an automatic over temperature shutdown sensor
to prevent damage.
Protection against water damage
The upper wheel assembly and the lower bearing housing assembly are
sealed against water damage allowing faster clean up and protection when
cutting wet products.
High Quality Stainless Steel
Interior and Frame
Model : GBS-450S
Motor drive
The motor delivers power to the lower wheel through a V-belt drive system
resulting in minimal vibration and noise. The motor is designed to maintain a
high torque even at normal running speed.
Safety
A rolling table and hand guard provide safe and sanitary operation. If the door
opens during operation, the installed sensor automatically shuts off the power.
Cleaning
Both the upper and lower wheels have cleaning devices insuring improved
durability and sanitation. The door is hinged and easily removed for cleaning.
The installed scrap box allows quick removal of waste.
Thickness adjusting
The scaled shaft of the thickness adjusting plate allows a standardized and
consistent product cut.
Length of
Model
HP
Saw Blade
(inches)
Crated
Weight
2 YEAR
(
)
U.S.A only
(
)
lbs.
L x D x H
(
)
inches
GBS-450S 3 126 729 46 x 371/2 x 833/4
Ver.201501
Meat Saw
High Quality Stainless Steel
Interior and Frame
Model : GBS-450S
ELECTRICAL DATA
Motor
Power Voltage
Saw Blade Speed
AC208V • 60Hz • 3Phase
DIMENSIONAL DATA
Ext. Length Overall in.
Ext. Depth Overall in.
Ext. Height Overall in.
Length of Saw Blade
Gross Weight lbs.
Loading Dimension (L x H)
Work Table (W x D)
Switch
Drive
Design and specifications subject to change without notice.
Actual shipping weight may differ due to extra packing materials for product protection.
2 Year Parts and Labor Warranty
3 HP
5,000 ft/min
46 (1168mm)
37
1/2 (952mm)
83
3/4 (2127mm)
126 (3200mm)
729
15
1/2 x 183/8
34 x 36
Two Hands Start
Non Slip V-Belt
PLAN VIEW
833/4 (2127mm)
(unit : inch)
371/2 (952mm)
FRONT VIEW
46 (1168mm)
SIDE VIEW
833/4 (2127mm)
2 YEAR
(
U.S.A only
Ver.201501
Turbo Air : 800-627-0032
)
Warrant y : 800-381-7770
GK : 800-500-3519
AC : 888-900-1002
Loading...