Turbo Air ADR196A User Manual
Unit Cooler
4184 E. Conant St.
Long Beach, CA 90808
Tel. 888-900-1002
Fax. 310-900-1088
www.turboairinc.net
Project :
Model # :
Item # : Qty :
Approval :
Model : ADR196A
Blue anti-corrosion-fin increases the life span of the coil.
Air-pass guard is located at the bottom of the coil to
improve heat exchange rate.
Easy to replace defrost heater. (LED model)
Corrugated fin is used to increase heat exchanges rate
by expanding the surface area.
Even in confined space, all parts can be reached easily
by opening the front cover.
Location of power connector makes replacement of
motor convenient.
Seamless inner groove copper tube increases the heat
exchange rate by reducing the space between the fin
and copper tube.
Venturi type distributor and precise orifice hole are used
to minimize the pressure drop and maximize the
freezing capacity respectively.
Even in confined space, all parts can be reached easily
by opening the front cover.
Ver.201401
Thermostat is installed to prevent over temperature on
heater.
Circuit opens automatically over 50°F.
Parts available :
Expansion Valve (Sporlan) (Pre Mounted)
Solenoid Valve (Sporlan)
Thermostat (Johnson Control)
The spiral fan guard enables cold air to be delivered
efficiently and thoroughly.
The protruding fan and motor placement substantially
reduce vibration and noise.
PSC fan motor, which prevents oil evaporation, is used
for long life expectancy.
EC Motor (optional) for high energy efficiency.
Unique air flow system (patent pending) results in
improved circulation within crowded walk-in
cooler/freezer.
Anti-oxidizing stainless steel mounting and bolts.
1 YEAR
(
)
U.S.A only
Unit Cooler
Model : ADR196A
ADR AIR DEFROST MODELS 60HZ. WITH PSC MOTORS.
ADR
Model
ADR196A
Capacity
BTUH
10°F TD
25°F SST
19600
Fan Data
CFM/m
3
H
1950 3 1/15 2.25 240
No.
HP
PSC Motor Data
120V 1Ph 60Hz
Total
Amps
Watts
ADR
Model Inlet Lbs
ADR196A
Design and specifications subject to change without notice
Coil
1/2 OD 7/8 ID 3/4 MPT 69
Suction
1 Year Fan Motor and Parts Warranty
PLAN VIEW
3/4” MPT (14NPS)
Drain Connection
FRONT VIEW
Connections (Inches)
External
Equalizer
1/4 OD
15”
Drain
12
Approx.
Net Wt.
(unit : inch)
7/16”
163/16”
1 YEAR
(
U.S.A only
49
613/8”
TOP VIEW
)
3/8”
1313/16”
1115/16”
7/16”
15
SIDE VIEW
Toll Free : 888-900-1002
Loading...