Medium Profile Coil
4184 E. Conant St.
Long Beach, CA 90808
Tel. 888-900-1002
Fax. 310-900-1088
www.turboairinc.net
Project :
Model # :
Item # : Qty :
Approval :
Model : ADM131A
Feature
- More space in the electrical cavity
- Electrical board is now facing forward for easy
installation and servicing.
- All wiring (solenoid and motor) is now located in the
bottom of the unit for easy access.
- Charge nipple provided for suction pressure
measurement.
- Aluminum case are now powder coated for corrosion
protection.
- FAN GUIDE GRILL provided for air throw extension.
- Drain pan hinged on rear for easy acces and applied
double drain pan for thermal efficiency.
Front Access with More Space
- Design features easy front access to both electrical
and refrigeration components.
- More space in the electrical cavity makes the unit
easier to service and install.
- Front facing electrical control board.
Ver.201401
Wiring
- Solenoid harness is standard
- Motor and solenoid harnesses are attached to sheet
metal panels and are now located at the bottom of the
unit for easy access.
- Holes in the bottom of the sheet metal panels for
easier wire routing.
- Easy plug connectors for motor harness.
Heaters & Coil
- Coil heater slots have been enlarged for easier
installation and replacement.
- Fixed defrost termination and adjustable defrost cycle
on electric defrost.
1 YEAR
(
U.S.A only
)
Medium Profile Coil
Model : ADM131A
ADR Air Defrost Models 60Hz. With PSC Motors.
Capacity
ADR Tota l
Model CFM/
ADM131A 2370 1 1/4 1.40 300
10°F TD
25°F SST
13100
Fan Data
PSC Motor Data
115V 1Ph 60HzBTUH
H No. HP Amps Watts
Connections (Inches)
ADR Coil Net Wt.
Model Inlet Suction Drain Lbs
ADM131A 1/2 OD 7/8 OD 3/4 MPT 75
Design and specifications subject to change without notice
External
Equalizer
1/4 OD
1 Year Compressor Warranty (4 Year extended warranty available)
1 Year Fan Motor and Parts Warranty
PLAN VIEW
39-3/8”
30-3/8”
Approx.
(unit : inch)
FRONT VIEW
1 YEAR
(
)
U.S.A only
30-3/8”
TOP VIEW
SIDE VIEW
Toll Free : 888-900-1002